ecos-discuss archive
date index for September, 2004

This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.

Indexes: [Date Index] [Subject Index] [Author Index] [Thread Index]
Site Nav: [Browse other archives for this mailing list]
[Browse other mailing lists at this site]
Search: Limit to:

September 30, 2004
17:32 Re: Question on programming style Nick Garnett
17:09 Question on programming style Rycerz Roman-G11565
16:52 Re: EB40A (AT91) serial port oddness Nick Garnett
14:08 RE: Linkerscript Meulendijks, J.
13:49 Re: FATFS on MMC Daniel Morris
13:44 RE: Linkerscript Gary Thomas
13:30 RE: Linkerscript Meulendijks, J.
11:42 Re: EB40A (AT91) serial port oddness Tom Lynn
11:39 FATFS on MMC Tihomir Borovski
10:46 RE: Linkerscript Meulendijks, J.
10:33 Re: Linkerscript Nick Garnett
10:29 Re: RE: ctrl-c in GDB Nick Garnett
10:21 Reset ARM while preserving memory, continue execution later Heiko Panther
10:11 Re: jffs2 problem:mkdir liu hua
10:08 RE: RE: ctrl-c in GDB Vikas K. Prasad
10:04 Re: RE: ctrl-c in GDB Nick Garnett
09:58 Linkerscript Meulendijks, J.
09:29 RE: RE: ctrl-c in GDB Vikas K. Prasad
09:07 Re: EB40A (AT91) serial port oddness Nick Garnett
08:49 Re: RE: ctrl-c in GDB Nick Garnett
08:43 Re: jffs2 problem:mkdir Andrew Lunn
08:28 Re: RE: ctrl-c in GDB Andrew Lunn
06:53 RE: RE: ctrl-c in GDB Vikas K. Prasad
04:09 jffs2 : 'Extra memory required by FLASH device drivers' liu hua
03:08 jffs2 problem:mkdir liu hua

September 29, 2004
16:27 EB40A (AT91) serial port oddness Tom Lynn
11:46 Re: Error: Socket was forcibly closed by remote host Andrew Lunn
11:38 Re: Problems with JFFS2 mount Andrew Lunn
11:19 Re: Error: Socket was forcibly closed by remote host Vijay Padiyar
11:03 Re: Problems with JFFS2 mount Manoj Abraham
10:29 Re: Problems with JFFS2 mount Andrew Lunn
10:26 Re: Error: Socket was forcibly closed by remote host Andrew Lunn
10:03 Re: Undefined reference to hal_interrupt_stack_call_pending_DSRs sandeep
09:53 Error: Socket was forcibly closed by remote host Vijay Padiyar
09:46 Re: Problem with go command Nick Garnett
09:37 Re: Undefined reference to hal_interrupt_stack_call_pending_DSRs Nick Garnett
09:33 Re: RE: ctrl-c in GDB Nick Garnett
09:30 Re: Floating Point Register saves Nick Garnett
09:28 Re: Problem with go command Prabhat Shrivastav
09:03 Re: Why little-endian redboot can't find flash Nick Garnett
08:28 Undefined reference to hal_interrupt_stack_call_pending_DSRs leslie
07:51 Why little-endian redboot can't find flash Daniel Yu
07:34 Re: need help for EB40A board Robin Randhawa
05:52 need help for EB40A board Ashish Chopra
04:30 Re: Floating Point Register saves David Brennan
04:27 RE: RE: ctrl-c in GDB Vikas K. Prasad

September 28, 2004
22:20 REG macros in hal_xscale.h Moseley, Drew
21:58 Re: running application problem [IXDP425] Andrew Lunn
21:05 Re: LD Bob Koninckx
20:59 Re: Floating Point Register saves Bob Koninckx
16:52 [COMMERCIAL] eCosCentric announces C++ support for eCosPro Daniel Morris
16:32 Re: RE: ctrl-c in GDB Nick Garnett
15:51 GCC 3.4.2 w/multithreaded C++ exceptions Øyvind Harboe
14:55 Re: Problems with JFFS2 mount Manoj Abraham
14:43 running application problem [IXDP425] Antonello Lombardinilo
13:59 RE: ctrl-c in GDB Vikas K. Prasad
13:01 Map file (code 335) Meulendijks, J.
13:00 RE: Problem with go command ecos-dev
12:50 Re: Problems with JFFS2 mount Andrew Lunn
12:46 Re: Problem with go command Andrew Lunn
11:21 Problems with JFFS2 mount Manoj Abraham
11:01 Re: Re: fatfs help. Savin Zlobec
10:27 Problem with go command Prabhat Shrivastav
10:27 Problem with go command Prabhat Shrivastav
09:20 Re: Floating Point Register saves Nick Garnett
09:07 Re: Lexar 4189 support Nick Garnett
08:56 LD Meulendijks, J.
03:52 RE: Lexar 4189 support Andrew Dyer
03:07 RE: Floating Point Register saves Paul D. DeRocco
03:03 Re: Lexar 4189 support Bhaskar
02:11 Floating Point Register saves David Brennan

September 27, 2004
19:45 Re: FLASH woes continue Krishna Ganugapati
19:41 Re: FLASH woes continue Mark Salter
18:11 Re: configtool message - add and remove hardware packages by creating a new hardware template.. Krishna Ganugapati
18:11 FLASH woes continue Krishna Ganugapati
17:35 Re: function executed under idle thread context Andrew Lunn
15:54 RE: ctrl-c in GDB Vikas K. Prasad
15:48 function executed under idle thread context Ajay Dudani
15:34 Re: few doubts related to delay_us implementation Nick Garnett
15:25 Re: few doubts related to delay_us implementation sandeep
15:22 libstdc++ for GCC 3.4.2 Øyvind Harboe
14:58 Re: few doubts related to delay_us implementation Nick Garnett
14:34 Re: reboot and ecos basic questions Grant Edwards
14:03 few doubts related to delay_us implementation sandeep
12:55 naive doubts regarding magic nos. in show_ticks_in_us implementations sandeep
12:25 reboot and ecos basic questions Robert V
11:27 Re: fdopen() linker error Jonathan Larmour
11:04 Re: configtool message - add and remove hardware packages by creating a new hardware template.. jerzy dyrda
10:35 Re: configtool message - add and remove hardware packages by creating a new hardware template.. Antonello Lombardinilo
10:13 ctrl-c in GDB Vikas K. Prasad
09:04 Problem in building the H8300 toolchain Jordan Pan
08:57 Re: fdopen() linker error Nick Garnett
08:43 Re: Lexar 4189 support Nick Garnett
08:34 Re: Optimising Standard Serial Driver Nick Garnett
06:57 Re: Optimising Standard Serial Driver Mike Jastrebtsoff
06:53 Re: Optimising Standard Serial Driver Andrew Lunn
05:46 Optimising Standard Serial Driver Andy Atkinson

September 26, 2004
17:42 RE: Lexar 4189 support Andrew Dyer
12:20 Re: fdopen() linker error Gary Thomas
09:35 Re: fdopen() linker error Øyvind Harboe
00:14 Re: fdopen() linker error Gary Thomas
00:11 Re: Differences between PPC series? Gary Thomas

September 25, 2004
16:49 Re: fdopen() linker error Øyvind Harboe
14:07 Differences between PPC series? Yuan Jianghai

September 24, 2004
18:32 Re: Why is the DCACHE and ICACHE enabled twice? Mark Salter
18:00 Re: Why is the DCACHE and ICACHE enabled twice? Krishna Ganugapati
17:57 Why is the DCACHE and ICACHE enabled twice? Krishna Ganugapati
16:56 Re: Is this a bug Nick Garnett
16:19 Re: arm-elf-gdb Cannot access memory at address ...[IXDP425] Antonello Lombardinilo
16:13 Re: Is this a bug TomChen
15:43 Re: arm-elf-gdb Cannot access memory at address ...[IXDP425] Mark Salter
15:38 Re: arm-elf-gdb Cannot access memory at address ...[IXDP425] Antonello Lombardinilo
15:33 Re: arm-elf-gdb Cannot access memory at address ...[IXDP425] Krishna Ganugapati
15:26 Re: arm-elf-gdb Cannot access memory at address ...[IXDP425] Mark Salter
15:22 Re: fdopen() linker error Jani Monoses
15:21 Re: Problem in Redboot while loading BOOT SCRIPT m a
15:17 fdopen() linker error Øyvind Harboe
15:05 Re: arm-elf-gdb Cannot access memory at address ...[IXDP425] Antonello Lombardinilo
15:05 Re: Is this a bug Nick Garnett
14:54 Re: arm-elf-gdb Cannot access memory at address ...[IXDP425] Gary Thomas
14:46 Re: arm-elf-gdb Cannot access memory at address ...[IXDP425] Mark Salter
14:24 Is this a bug TomChen
14:09 Re: arm-elf-gdb Cannot access memory at address ...[IXDP425] Gary Thomas
14:01 arm-elf-gdb Cannot access memory at address ... [IXDP425] Antonello Lombardinilo
13:32 jffs2 problem: cannt mkdir liu hua
12:30 Re: Eth driver to NPE on xscale ixp425 Mark Salter
11:48 Re: query about PHY device driver Vijay Padiyar
11:22 Re: Eth driver to NPE on xscale ixp425 jerzy dyrda
11:14 newlib and eCos Øyvind Harboe
11:12 Changes required when replacing the PHY on the AdderII board with a LXT971 PHY?? jason kole
09:36 Re: Lexar 4189 support Nick Garnett
09:26 Re: query about PHY device driver Nick Garnett
09:18 Re: Linking problem Nick Garnett
07:12 RE: Linking problem Meulendijks, J.
06:55 Re: network partly initialized now... Andrew Lunn
04:11 query about PHY device driver Vijay Padiyar
04:00 network partly initialized now... Vijay Padiyar
02:52 Lexar 4189 support Bhaskar
01:40 Re: Re: [ECOS] GDB connect via UART failed jourdon shell

September 23, 2004
18:34 Re: GDB connect via UART failed dpalmer
16:52 Re: problem with network initialization Andrew Lunn
12:03 Re: Linking problem Billy
09:43 Re: How to send SIGTSTP,SIGCONt signals to a script scheduled using cron Manish Kumar Arya
09:10 How to send SIGTSTP,SIGCONt signals to a script scheduled using cron Saurabh Agarwal
08:11 Linking problem Meulendijks, J.
07:04 problem with network initialization - mistake Vijay Padiyar
07:02 problem with network initialization Vijay Padiyar
03:04 GDB connect via UART failed jourdon_shell

September 22, 2004
18:13 Re: How does FEC work on the ADDERII without PHY package being called!!surprise!! jason kole
17:41 Re: Linking problem Gary Thomas
16:46 Re: Linking problem Eric Donnat
15:37 Re: CYGBLD_ATTRIB_WEAK_ALIAS error ! Gary Thomas
15:27 CYGBLD_ATTRIB_WEAK_ALIAS error ! firs
13:54 RE: Linking problem Meulendijks, J.
13:44 Re: Eth driver to NPE on xscale ixp425 Mark Salter
13:20 Re: Real Tek 8139 Nick Garnett
13:14 Re: Real Tek 8139 Andrew Lunn
13:10 Eth driver to NPE on xscale ixp425 jerzy dyrda
12:28 Re: Real Tek 8139 Muna Hummady
12:18 Re: JFFS2 Help Andrew Lunn
12:06 Re: How does FEC work on the ADDERII without PHY packagebeing called!!surprise!! Gary Thomas
11:49 Re: JFFS2 Help Manoj Abraham
11:40 How does FEC work on the ADDERII without PHY package being called!!surprise!! jason kole
11:02 Configtool window closes Devaughn, Hans
10:00 Re: JFFS2 Help Andrew Lunn
09:19 Re: Real Tek 8139 Nick Garnett
09:14 Real Tek 8139 Muna Hummady
08:58 Re: JFFS2 Help Manoj Abraham
08:58 Re: problem with SYSINIT in support.c Nick Garnett
07:53 FWD: Re: Help on JFFS2 Andrew Lunn
07:40 Re: No 'Hello eCos World' message!!! Andrew Lunn
05:47 problem with SYSINIT in support.c Vijay Padiyar
04:50 No 'Hello eCos World' message!!! Vijay Padiyar

September 21, 2004
18:05 Re: is there such a thing as an ecos kernel shell? Andrew Lunn
13:57 AT91M55800A - PIO Sebastian Block
13:05 RE: Linking problem Gary Thomas
12:59 RE: Linking problem Meulendijks, J.
12:45 RE: Linking problem Gary Thomas
12:41 RE: Linking problem Meulendijks, J.
12:39 Re: Linking problem Sebastian Block
12:37 JFFS2 memory usage in systems with limited RAM Øyvind Harboe
12:16 Linking problem Meulendijks, J.
08:53 Re: Problem with xyzmodem Jani Monoses
08:46 Problem with xyzmodem Prabhat Shrivastav
08:46 Problem with xyzmodem Prabhat Shrivastav
07:43 AW: Re: IXDP425 redboot from CVS ld error Antonello Lombardinilo
07:19 Re: flash_query throws an exception (Redboot_ROM version) Andrew Lunn
01:13 Re: Nios processor support? Hao

September 20, 2004
21:58 bin_sem2 test Joshua Boyd
21:45 Re: flash_query throws an exception (Redboot_ROM version) Krishna Ganugapati
19:01 Re: Re: VFP and FPA incompatibilitieserrors when building latest anonsources with 3.2.1arm-elf Krishna Ganugapati
18:35 Re: VFP and FPA incompatibilitieserrors when building latest anonsources with 3.2.1arm-elf Mark Salter
18:07 VFP and FPA incompatibilitieserrors when building latest anon sources with 3.2.1arm-elf Krishna Ganugapati
17:59 Re: flash_query throws an exception (Redboot_ROM version) Krishna Ganugapati
17:23 connecting the host to RedBoot via networking Muna Hummady
17:21 Re: debug i386 application Muna Hummady
17:17 Re: flash_query throws an exception (Redboot_ROM version) Mark Salter
16:33 Re: flash_query throws an exception (Redboot_ROM version) Krishna Ganugapati
16:27 Re: flash_query throws an exception (Redboot_ROM version) Andrew Lunn
16:10 flash_query throws an exception (Redboot_ROM version) Krishna Ganugapati
15:31 Re: Re: IXDP425 redboot from CVS ld error Mark Salter
14:24 Re: AT91EB55 Sebastian Block
13:50 Re: AT91EB55 Sebastian Block
13:45 Re: AT91EB55 Gary Thomas
13:44 Re: AT91EB55 Nick Garnett
13:39 Re: AT91EB55 Sebastian Block
13:18 Re: AT91EB55 Andrew Lunn
13:09 AT91EB55 Sebastian Block
12:25 Re: Re: IXDP425 redboot from CVS ld error Gary Thomas
12:22 Re: Problem in Redboot while loading BOOT SCRIPT Gary Thomas
12:18 RE: Problem with getchar / gets / fgets Nicolas Brouard
11:58 Re: debug i386 application Andrew Lunn
11:52 Re:Re: debug i386 application Muna Hummady
11:51 Re: debug i386 application Muna Hummady
11:11 AW: Re: IXDP425 redboot from CVS ld error Neundorf, Alexander
11:01 Re: regarding supported file system Andrew Lunn
10:52 Re: Re: IXDP425 redboot from CVS ld error Antonello Lombardinilo
10:49 regarding supported file system Ashutosh
10:39 Re: Re: IXDP425 redboot from CVS ld error Antonello Lombardinilo
10:39 Re: Re: IXDP425 redboot from CVS ld error jerzy dyrda
09:48 FAT filesystem Iram
09:47 Re: Re: IXDP425 redboot from CVS ld error Andrew Lunn
09:46 Re: Help on JFFS2 Andrew Lunn
09:39 Problem in Redboot while loading BOOT SCRIPT m a
09:24 Re: IXDP425 redboot from CVS ld error Antonello Lombardinilo
09:11 Re: debug i386 application Jonathan Larmour
09:03 Re: Help on JFFS2 Andrew Lunn
08:58 Re: debug i386 application Andrew Lunn
08:53 Help on JFFS2 Manoj Abraham
08:51 Re: debug i386 application Muna Hummady
08:50 Re: debug i386 application Muna Hummady

September 19, 2004
21:50 Re: arm_stub SWI compiler warning Mark Salter
20:42 Re: Trying to figure out redboot TCP/IP stack Bob Koninckx
17:12 Re: Undefined hal_interrupt_stack_call_pending_DSRs leslie
16:45 Re: Undefined hal_interrupt_stack_call_pending_DSRs Gary Thomas
16:34 Undefined hal_interrupt_stack_call_pending_DSRs leslie
15:21 Re: Trying to figure out redboot TCP/IP stack Gary Thomas
14:32 Re: task switch hook Andrew Lunn
14:27 Re: Problems with new JFFS2 compress infrastructure Andrew Lunn
13:20 arm_stub SWI compiler warning Andrew Lunn
09:43 Trying to figure out redboot TCP/IP stack Bob Koninckx

September 18, 2004
19:01 Re: Re: fatfs help. David Brennan
19:01 Re: task switch hook David Brennan

September 17, 2004
17:08 re: PPC852T port pin configuration questions Steve Strublic
16:51 Nios processor support? harmon
16:21 Re: PC VMware target broken Iztok Zupet
14:08 CVS configtool build crashes on Debian testing Peter Soetens
13:33 Re: PC VMware target broken Jani Monoses
13:18 PC VMware target broken Iztok Zupet
11:14 Re: Doubt pertaining to scheduler locking in interrupt_end Nick Garnett
10:43 Re: Re: fatfs help. Andrew Lunn
10:37 Re: Target.ld Nick Garnett
10:33 Re: Definition of 'bool' Nick Garnett
10:23 Doubt pertaining to scheduler locking in interrupt_end sandeep
10:14 Re: Target.ld Andrew Lunn
09:49 RE: Target.ld Meulendijks, J.
09:37 Re: Target.ld Andrew Lunn
09:30 Porting Falcom F35xxl to Ecos 2.0 Slawomir Kawalek
09:02 RE: Target.ld Meulendijks, J.
08:39 Re: Definition of 'bool' Lars Viklund
07:26 Re: task switch hook Andrew Lunn
07:20 Re: problem with running eCos kernel image on Redboot Andrew Lunn
07:08 Re: Re: Problems in building Redboot with ROM File System Andrew Lunn
06:24 CAN-Bus-Controller Sebastian Block
06:01 problem with running eCos kernel image on Redboot Chandrashekhar Padiyar
05:10 Re: Please help! Jonathan Larmour
04:32 Re: Re: Problems in building Redboot with ROM File System Manoj Abraham
03:36 task switch hook David Brennan
03:31 Re: Re: fatfs help. David Brennan
00:33 jffs2 filesystem issues Ashish Chopra

September 16, 2004
23:41 Re: Definition of 'bool' Gary Thomas
23:33 Re: Definition of 'bool' Matt Jerdonek
23:28 Re: Definition of 'bool' Gary Thomas
23:21 Re: PPC852T port pin configuration questions Gary Thomas
23:07 Definition of 'bool' Matt Jerdonek
23:03 PPC852T port pin configuration questions Steve Strublic
18:03 Re: Terminal over TCP too slow Christian Mueller
15:23 Re: Problems in building Redboot with ROM File System Andrew Lunn
15:17 Re: Terminal over TCP too slow Andrew Lunn
15:06 Re: Terminal over TCP too slow Christian Mueller
14:55 Re: Terminal over TCP too slow Jani Monoses
14:55 Re: Re: Problems in building Redboot with ROM File System Gary Thomas
14:51 Re: Problems in building Redboot with ROM File System Manoj Abraham
14:40 Re: Terminal over TCP too slow Christian Mueller
14:31 Re: Problems in building Redboot with ROM File System Andrew Lunn
14:30 Re: Terminal over TCP too slow Andrew Lunn
14:12 Re: Problems with new JFFS2 compress infrastructure eibach
13:56 Problems in building Redboot with ROM File System Manoj Abraham
13:49 Terminal over TCP too slow Christian Mueller
12:15 Re: AT91: fiq patch Andrew Lunn
11:16 Cygwin and eCos in different directory then C:\cygwin Meulendijks, J.
09:30 Re: Laoding Filesystem to the target Andrew Lunn
09:11 Laoding Filesystem to the target Manoj Abraham
09:07 Re: Target.ld Nick Garnett
08:59 Re: suggestions regarding except1 and kexcept1 kernel tests Nick Garnett
08:56 Target.ld Meulendijks, J.
08:37 AT91: fiq patch Andrea Michelotti
08:10 Redboot / ecos on OKI ML674k Jerry
08:02 Re: AT91: fiq patch Andrew Lunn
04:55 suggestions regarding except1 and kexcept1 kernel tests sandeep

September 15, 2004
19:26 cs8900a seems to be missing frames Bob Koninckx
17:19 AT91: fiq patch Andrea Michelotti
13:22 Re: ecosconfig new <TARGET> ? Nick Garnett
13:02 Re: IXDP425 redboot from CVS ld error Mark Salter
12:49 Re: AT91: FIQ patch proposal Andrea Michelotti
12:46 IXDP425 redboot from CVS ld error Antonello Lombardinilo
12:41 thread creation problem Aravind B
12:37 Re: Context.s problem Andrew Lunn
12:36 Re: ecosconfig new <TARGET> ? Gary Thomas
12:32 Re: Problems with new JFFS2 compress infrastructure Gary Thomas
12:29 Re: problem thread creation Gary Thomas
12:17 ecosconfig new <TARGET> ? firs
12:17 Problems with new JFFS2 compress infrastructure eibach
12:15 RE: Context.s problem Meulendijks, J.
12:13 problem thread creation Aravind B
12:01 Re: problem in thread creation Gary Thomas
11:57 Re: AT91: FIQ patch proposal Andrew Lunn
11:44 Re: jffs2 writing issues. Andrew Lunn
10:51 AT91: FIQ patch proposal Andrea Michelotti
10:40 jffs2 writing issues. Mike Jastrebtsoff
10:39 Re: problem in thread creation Andrew Lunn
10:05 Re: AT91: interrupt0 (fiq) and interrupt1 (swint) ? Andrea Michelotti
09:56 problem in thread creation Aravind B
09:36 Re: zImage Help. Nick Garnett
09:29 Re: AT91: interrupt0 (fiq) and interrupt1 (swint) ? Nick Garnett
09:11 Re: AT91: interrupt0 (fiq) and interrupt1 (swint) ? Andrew Lunn
09:00 Re: problem in thread creation Nick Garnett
08:57 Re: AT91 bad IRQ/FIQ priority handling? Daniel Néri
08:52 Re: JFFS2 + Wonka = freeze. Bug? Andrew Lunn
08:49 Re: problem in thread creation Andrew Lunn
08:37 JFFS2 + Wonka = freeze. Bug? Marco Bressan
08:32 AT91: interrupt0 (fiq) and interrupt1 (swint) ? Andrea Michelotti
08:02 problem in thread creation Aravind B
07:32 Memory debug feature bug? Mike Jastrebtsoff
07:28 Re: zImage Help. Vijay Jayaraman
03:19 Installing GoHead Webserver on eCos leslie
03:09 jffs filesystem bug Ashish Chopra
03:07 FW: Brilliant FWD: Want Pills xa'nx va1^ium v|agr@ transverse gregory essler

September 14, 2004
20:40 RE: Problem with getchar / gets / fgets Nicolas Brouard
20:08 RE: Problem with getchar / gets / fgets Gary Thomas
19:59 RE: Problem with getchar / gets / fgets Nicolas Brouard
19:53 RE: Problem with getchar / gets / fgets Nicolas Brouard
19:37 Re: Problem with getchar / gets / fgets Gary Thomas
19:12 Re: Problem with getchar / gets / fgets Andrew Lunn
18:37 Problem with getchar / gets / fgets Nicolas Brouard
17:22 Re: POSIX timer_create Nick Garnett
17:03 Re: AT91 bad IRQ/FIQ priority handling? Andrew Lunn
16:38 Re: AT91 bad IRQ/FIQ priority handling? Andrea Michelotti
15:19 Re: AT91 bad IRQ/FIQ priority handling? Andrew Lunn
15:15 Re: Context.s problem Andrew Lunn
14:57 Re: AT91 bad IRQ/FIQ priority handling? Andrea Michelotti
14:39 RE: Context.s problem Gary Thomas
14:33 RE: Context.s problem Meulendijks, J.
13:55 gdb debug channel Zhao Luo
13:51 Re: AT91 bad IRQ/FIQ priority handling? Andrew Lunn
13:30 Re: POSIX timer_create Andrew Lunn
12:37 Re: Atmel EB55 Support in eCos configtool 2.x Ali Sina
12:27 Re: thread creation Gary Thomas
12:17 thread creation Aravind B
11:00 RE: POSIX timer_create Devaughn, Hans
10:52 Re: Atmel EB55 Support in eCos configtool 2.x Sebastian Block
10:00 Re: POSIX timer_create Nick Garnett
09:54 Re: PPP-Stack dial-into Kelvin Lawson
09:53 Atmel EB55 Support in eCos configtool 2.x Ali Sina
09:45 Re: zImage Help. Nick Garnett
09:44 Re: AT91 bad IRQ/FIQ priority handling? Andrea Michelotti
09:20 Re: AT91 bad IRQ/FIQ priority handling? Andrew Lunn
09:09 Re: zImage Help. Andrew Lunn
08:52 AT91 bad IRQ/FIQ priority handling? Andrea Michelotti
08:18 Re: Writing a (SPI) driver for the LPC2106. Jani Monoses
08:12 Re: stable cygwin ecos?! teun . van . de . berg
07:47 Writing a (SPI) driver for the LPC2106. teun . van . de . berg
07:36 Re: zImage Help. Vijay Jayaraman
07:33 zImage Help. Vijay Jayaraman
02:29 Re: Dual Ethernet for i386/pc David Brennan
02:22 Re: Re: fatfs help. David Brennan

September 13, 2004
21:24 Introducing a cmake based build system for ecos Alexander Neundorf
19:51 POSIX timer_create Devaughn, Hans
18:48 Re: Redboot Server address problem Andrew Lunn
16:03 Re: PPP-Stack dial-into Nick Garnett
15:40 stable cygwin ecos?! Meulendijks, J.
15:22 PPP-Stack dial-into Thomas Motz
15:18 Re: Redboot Server address problem Vijay Jayaraman
14:59 Re: Increasing Max.Number of Sockets dpalmer
08:23 RE: Context.s problem Meulendijks, J.
07:52 Re: Redboot Server address problem Andrew Lunn
07:43 Re: Redboot Server address problem Vijay Jayaraman
07:26 AT91 - EB 55 Powersave - Mode !? Sebastian Block
07:11 Re: Context.s problem Andrew Lunn
06:54 RE: Context.s problem Meulendijks, J.
06:51 Re: Context.s problem Andrew Lunn
06:50 Re: Fake reply addresses to the eCos lists Edgar Grimberg
06:49 Context.s problem Meulendijks, J.
06:39 Re: Redboot make tests fails. Andrew Lunn
06:38 Re: Redboot Server address problem Andrew Lunn
05:47 (To Cheng Ping)eCos ethernet support on 8260 board Manoj Abraham
02:20 Redboot make tests fails. Vijay Jayaraman
02:14 Redboot Server address problem Vijay Jayaraman

September 12, 2004
20:41 Fake reply addresses to the eCos lists Chris Garry
19:07 Debug session Xavier

September 11, 2004
08:56 mkfs.jffs2 ver. 1.19 Mike Jastrebtsoff
03:45 Dual Ethernet for i386/pc David Brennan

September 10, 2004
13:11 Help required in Debugging Ethernet Driver in IXP425 Vanitha Ramaswami
11:53 Enabling Ethernet Driver Debugging Messages in Redboot Vanitha Ramaswami
08:01 Re: issues/suggestions related to scheduler start function Brij Bihari Pandey
06:53 RE: installing ecos Han Hoekstra
06:43 Re: jffs2 mount error for EB40A board Andrew Lunn
05:49 RE: Interrupt support for eCos on OMAP 5910 (Innovator) Vikas K. Prasad
05:18 jffs2 mount error for EB40A board Ashish Chopra
01:59 installing ecos pierre

September 09, 2004
17:50 Re: issues/suggestions related to scheduler start function Nick Garnett
17:04 issues/suggestions related to scheduler start function Brij Bihari Pandey
15:57 Re: Thread preemption and blocking IO & device drivers Andrew Lunn
15:43 Thread preemption and blocking IO & device drivers Rycerz Roman-G11565
14:56 Re: Build error in ecos-current Joshua Boyd
14:42 RE: Cannot find Tcl shell Meulendijks, J.
14:21 Re: debug i386 application dpalmer
13:33 Re: Cannot find Tcl shell Andrew Lunn
13:28 RE: Interrupt support for eCos on OMAP 5910 (Innovator) Vikas K. Prasad
13:25 RE: Cannot find Tcl shell Meulendijks, J.
13:18 Re: Cannot find Tcl shell Andrew Lunn
13:17 Re: IO_Flash & DataFlash Andrew Lunn
13:16 Cannot find Tcl shell Meulendijks, J.
13:15 RE: Interrupt support for eCos on OMAP 5910 (Innovator) Doyle, Patrick
12:56 Re: Interrupt support for eCos on OMAP 5910 (Innovator) Andrew Lunn
12:52 Interrupt support for eCos on OMAP 5910 (Innovator) Vikas K. Prasad
11:39 linker segmentation fault Backhaus Willy
11:15 Re: File-system question Andrew Lunn
11:13 Re: Build error in ecos-current Andrew Lunn
11:09 Re: JFFS file truncation Andrew Lunn
08:24 File-system question Han Hoekstra
05:08 Re: linker segmentation fault David Brennan
02:32 Re: Build error in ecos-current Tony Butt

September 08, 2004
21:18 Build error in ecos-current Joshua Boyd
21:02 JFFS file truncation Mark Hamilton
20:59 Re: linker segmentation fault Andrew Lunn
17:50 linker segmentation fault David Chu
14:02 RE: Increasing Max.Number of Sockets Richard Rauch
13:59 Re: NPE on xscale ixp425 jerzy dyrda
13:47 Re: RedBoot as an application command shell Gary Thomas
13:40 Re: NPE on xscale ixp425 Mark Salter
13:35 RedBoot as an application command shell Nicolas Brouard
13:27 Re: Re: NPE on xscale ixp425 jerzy dyrda
12:37 Re: Increasing Max.Number of Sockets Gary Thomas
12:25 Increasing Max.Number of Sockets Richard Rauch
12:25 Flash infrastructure rework Savin Zlobec
11:56 Re: NPE on xscale ixp425 Mark Salter
11:18 Re[2]: Slow compilation with CygWin under Windows XP Mike Jastrebtsoff
11:04 Re: Re[2]: Slow compilation with CygWin under Windows XP Øyvind Harboe
09:20 NPE on xscale ixp425 jerzy dyrda
09:16 Re: Slow compilation with CygWin under Windows XP Øyvind Harboe
09:03 Re: thread id Robin Singh
07:54 thread id Aravind B
07:13 EB40A serial buffer size problem eibach
05:08 Re: Slow compilation with CygWin under Windows XP Mike Jastrebtsoff

September 07, 2004
16:42 Slow compilation with CygWin under Windows XP Øyvind Harboe
15:31 AW: Delaying a thread for less than 10ms Gorjup Matthias
14:46 Re: Delaying a thread for less than 10ms Gary Thomas
14:34 Delaying a thread for less than 10ms Gorjup Matthias
12:16 Re:AMD flash driver note Sebastian Block
12:01 Re: Running redboot from RAM using JTAG on a new customtarget Gary Thomas
06:58 Running redboot from RAM using JTAG on a new custom target Vanitha Ramaswami
04:07 Philips LPC2294 Xavier

September 06, 2004
10:32 Seeking Thread join / waitpid equivalent. Øyvind Harboe
10:23 Re: Philips LPC2294 Xavier
09:14 Re: Philips LPC2294 Nick Garnett
03:13 Philips LPC2294 Xavier

September 05, 2004
20:43 load image problem Asaf Bar - Zakai
08:37 Re: FreeBSD Stack/ Throughput over TCP/IP Andrew Lunn
03:03 ecos twothreads example hangs Vijay . Jayaraman

September 04, 2004
10:09 Problems in Booting the target Manoj Abraham
09:25 Re:Re: debug i386 application Muna Hummady

September 03, 2004
17:22 Re: Seeking Thread join / waitpid equivalent. Billy
15:27 Re: support for Diffserv Nick Garnett
15:05 support for Diffserv Paul Randall
14:42 i2c interface David Roethig
08:28 why are stdin, stdout, stderr const? Ian Gilmour
05:35 Re: Seeking Thread join / waitpid equivalent. sandeep

September 02, 2004
18:53 AMD flash driver note Lorenzo Midulla
14:09 Re: disk access mutex's Savin Zlobec
14:02 RE: FreeBSD Stack/ Throughput over TCP/IP Richard Rauch
13:42 Re: FreeBSD Stack/ Throughput over TCP/IP sebastien Couret
13:37 RE: ECOS Real-Time performance Meulendijks, J.
13:19 Re: FreeBSD Stack/ Throughput over TCP/IP Tim michals
13:15 Re: ECOS Real-Time performance Gary Thomas
13:15 FreeBSD Stack/ Throughput over TCP/IP Richard Rauch
13:02 Re: disk access mutex's Jeff Cooper
12:53 ECOS Real-Time performance Meulendijks, J.
12:30 RE: creating smallest binaries Gary Thomas
11:18 Re: May be problem with TCP/IP stack. Tihomir Borovski
10:47 Re: How to load redboot_ROM in to flash Nick Garnett
09:29 Re: May be problem with TCP/IP stack. sebastien Couret
08:46 May be problem with TCP/IP stack. Tihomir Borovski
08:28 Re: Re: cannot mount effs2 filesystem at boot brix82\ at libero\ dot it
08:01 Re: Re: What Generates mlt_arm_xscale_ixdp425_rom.h & SDRAMConfiguration Ian Campbell
07:38 Re: What Generates mlt_arm_xscale_ixdp425_rom.h & SDRAM Configuration Vanitha Ramaswami
06:19 Flashing MAC in a easier way for mass production UmaShankar
05:44 Re: How to load redboot_ROM in to flash Prabhat Shrivastav
02:46 RE: creating smallest binaries Paul D. DeRocco
02:05 creating smallest binaries George Pantazopoulos

September 01, 2004
12:28 Re: Problem with little-endian RedBoot for GRG board Mark Salter
10:31 Re: Re: cannot mount effs2 filesystem at boot Andrew Lunn
09:48 Re: Re: cannot mount effs2 filesystem at boot brix82\ at libero\ dot it
07:19 RE: Help required in rebuiliding redboot Vanitha Ramaswami
07:01 Re: disk access mutex's Savin Zlobec
01:27 Problem with little-endian RedBoot for GRG board =?big5?b?V2lsbGlhbSBDaGVuICizr

Indexes: [Date Index] [Subject Index] [Author Index] [Thread Index]
Site Nav: [Browse other archives for this mailing list]
[Browse other mailing lists at this site]
Search: Limit to:
Mail converted by MHonArc 2.6.3