This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: zImage Help.
Apologies, I meant, I want to load the kernel onto the target (pc). not the
pc as in 'host pc'.
-Vijay
----- Original Message -----
From: "Vijay Jayaraman" <Vijay.Jayaraman@Colorado.edu>
To: "Andrew Lunn" <andrew@lunn.ch>
Cc: <ecos-discuss@ecos.sourceware.org>
Sent: Tuesday, September 14, 2004 1:33 AM
Subject: [ECOS] zImage Help.
> Hi Friends,
>
> I have done the following
> - Redboot up and running with proper IP addresses.
> - all the tests under 'ecosconfig new pc' works fine when loaded from the
> /tftpboot folder via ethernet
>
> 1)
> I want to load the kernel onto the pc. I have found a lot of posts on
> RedBoot> load -r -b 0x8c210000 zImage or so... but none where it
specifies
> how to create a zImage.
> I would appreciate it if any one can tell me how to create a basic zImage
so
> that I can
> load the kernel onto the pc. I could not find it in the ecos users guide.
My
> apologies if
> I had missed it.
>
> 2)
> I also remember reading somewhere that ecos programs dont need the kernel
to
> run. Is this correct?
>
> Any help is greatly appreciated.
> Thanks in advance,
> -Vijay
>
>
> ----- Original Message -----
> From: "Andrew Lunn" <andrew@lunn.ch>
> To: "Vijay Jayaraman" <Vijay.Jayaraman@Colorado.edu>
> Cc: "Andrew Lunn" <andrew@lunn.ch>; <ecos-discuss@ecos.sourceware.org>
> Sent: Monday, September 13, 2004 12:48 PM
> Subject: Re: [ECOS] Redboot Server address problem
>
>
> > On Mon, Sep 13, 2004 at 09:18:54AM -0600, Vijay Jayaraman wrote:
> > > Andrew,
> > > I dont quite understand what you mean by ALL the steps. I thought
that
> > > ecosconfig new xyz
> > > add module (if needed)
> > > ecosconfig tree
> > > ecosconfig check
> > > ecosconfig resolve (if needed)
> > > make
> > > make tests
> >
> > Thats fine, so long as you don't use the redboot template and what to
> > build the tests. Your previous post did use redboot, so make tests
> > will not work.
> >
> > Andrew
> >
> > --
> > Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> > and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
> >
>
>
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss