This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: configtool message - add and remove hardware packages by creating a new hardware template..
- From: jerzy dyrda <jerzy dot dyrda at kontron dot pl>
- To: ecos-discuss at sources dot redhat dot com
- Cc: "Krishna Ganugapati" <krishnag at marakicorp dot com>,"Antonello Lombardinilo" <antonello at kasko dot it>
- Date: Mon, 27 Sep 2004 13:04:22 +0200
- Subject: Re: [ECOS] configtool message - add and remove hardware packages by creating a new hardware template..
- Organization: Kontron East Europe Sp. z o. o.
- References: <003901c48bb5$fc836ef0$6701a8c0@marakicorp.com>
Hi all,
Yes, I have the same problem - in new ecos configtool isn't neither package
manager for hardware package nor memory manager (I don't know why) . I add
new hardware package by ecosconfig add < package_name> and write manual to
ecos.db package definition ( this must I do first).
Best Regards,
Jerzy
On Thursday 26 of August 2004 23:45, Krishna Ganugapati wrote:
> I've just finished successfully building and installing Redboot (ROM) for
> my customized IXP425 board and it's great to see the Redboot prompt
> appearing on my Hyperterm console.. one of the best days of my life :-)
>
> I built my image by using the anon cvs sources and used the ixdp425
> development board template using configtool (the graphical tool for ecos
> configuration) and I want to continue to use the graphical configtool for
> further development (I like the interactive conflict resolution)
>
>
> Now I'm working on integrating the code
>
> I use ecosadmin.tcl and add the npe.epk into my source repository. If I
> were to continue using the command line ecosconfig, I would do a
>
> "ecosconfig new ixdp425 redboot
> "ecosconfig import ../../../.../redboot_rom.ecm
> "ecosconfig add <package>
> "ecosconfig add <package>
> "ecosconfig tree"
> "make"
> and I know this will work..
>
>
> However since I want to continue using configtool, I load up configtool,
> select "ixdp425" as my template and use redboot as the package, All well
> and good, and now I can just build my configuration.. and can get a build.
> But when I try to add <packages> , it gives me the following message:
>
> " add and remove hardware packages by creating a new hardware template?"
>
>
> Can someone tell me why this happens and how I can add these packages into
> my configuration starting with the ixdp425 template and baseline redboot
> package?
>
> Thanks
>
> Krishna
> -------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss