This is the mail archive of the
glibc-cvs@sourceware.org
mailing list for the glibc project.
GNU C Library master sources branch master updated. glibc-2.19-86-gcf822e3
- From: neleai at sourceware dot org
- To: glibc-cvs at sourceware dot org
- Date: 26 Feb 2014 22:29:02 -0000
- Subject: GNU C Library master sources branch master updated. glibc-2.19-86-gcf822e3
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU C Library master sources".
The branch, master has been updated
via cf822e3c94c2cdec736cdf7b503790b17179afcd (commit)
from 5b456e9d61c5c7a5744e8c9387498017af2c1e7e (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://sourceware.org/git/gitweb.cgi?p=glibc.git;a=commitdiff;h=cf822e3c94c2cdec736cdf7b503790b17179afcd
commit cf822e3c94c2cdec736cdf7b503790b17179afcd
Author: OndÅ?ej BÃlka <neleai@seznam.cz>
Date: Wed Feb 26 23:27:38 2014 +0100
Fix two spaces after sentence.
Minor formatting fix that was carried by issuing
sed -e"s/\. \([A-Z]\)/. \1/" followed by editing result.
diff --git a/ChangeLog b/ChangeLog
index b233462..157649b 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -56,6 +56,25 @@
* malloc/malloc.c (__libc_calloc): Simplify implementation.
+ * manual/arith.texi: Fix spaces after sentences.
+ * manual/charset.texi: Likewise.
+ * manual/errno.texi: Likewise.
+ * manual/install.texi: Likewise.
+ * manual/llio.texi: Likewise.
+ * manual/locale.texi: Likewise.
+ * manual/maint.texi: Likewise.
+ * manual/math.texi: Likewise.
+ * manual/memory.texi: Likewise.
+ * manual/message.texi: Likewise.
+ * manual/probes.texi: Likewise.
+ * manual/resource.texi: Likewise.
+ * manual/signal.texi: Likewise.
+ * manual/socket.texi: Likewise.
+ * manual/stdio.texi: Likewise.
+ * manual/string.texi: Likewise.
+ * manual/time.texi: Likewise.
+ * manual/users.texi: Likewise.
+
2014-02-25 Carlos O'Donell <carlos@redhat.com>
[BZ #16632]
diff --git a/manual/arith.texi b/manual/arith.texi
index d106014..72682f0 100644
--- a/manual/arith.texi
+++ b/manual/arith.texi
@@ -1237,7 +1237,7 @@ sqrt (creal (@var{z}) * creal (@var{z}) + cimag (@var{z}) * cimag (@var{z}))
This function should always be used instead of the direct formula
because it takes special care to avoid losing precision. It may also
-take advantage of hardware support for this operation. See @code{hypot}
+take advantage of hardware support for this operation. See @code{hypot}
in @ref{Exponents and Logarithms}.
@end deftypefun
@@ -1369,7 +1369,7 @@ of @w{IEEE 754} conformance.
@pindex math.h
The functions listed here perform operations such as rounding and
-truncation of floating-point values. Some of these functions convert
+truncation of floating-point values. Some of these functions convert
floating point numbers to integer values. They are all declared in
@file{math.h}.
@@ -2625,7 +2625,7 @@ All these functions are defined in @file{stdlib.h}.
@safety{@prelim{}@mtunsafe{@mtasurace{:ecvt}}@asunsafe{}@acsafe{}}
The function @code{ecvt} converts the floating-point number @var{value}
to a string with at most @var{ndigit} decimal digits. The
-returned string contains no decimal point or sign. The first digit of
+returned string contains no decimal point or sign. The first digit of
the string is non-zero (unless @var{value} is actually zero) and the
last digit is rounded to nearest. @code{*@var{decpt}} is set to the
index in the string of the first digit after the decimal point.
diff --git a/manual/charset.texi b/manual/charset.texi
index b2d73ab..68aecd3 100644
--- a/manual/charset.texi
+++ b/manual/charset.texi
@@ -1709,7 +1709,7 @@ implementation has the possibility to perform such a conversion, the
function returns a handle.
If the wanted conversion is not available, the @code{iconv_open} function
-returns @code{(iconv_t) -1}. In this case the global variable
+returns @code{(iconv_t) -1}. In this case the global variable
@code{errno} can have the following values:
@table @code
@@ -1838,7 +1838,7 @@ implementation chosen for @theglibc{} as it is described below.
Therefore an @code{iconv} call to reset the state should always be
performed if some protocol requires this for the output text.
-The conversion stops for one of three reasons. The first is that all
+The conversion stops for one of three reasons. The first is that all
characters from the input buffer are converted. This actually can mean
two things: either all bytes from the input buffer are consumed or
there are some bytes at the end of the buffer that possibly can form a
@@ -2133,7 +2133,7 @@ will succeed, but how to find @math{@cal{B}}?
Unfortunately, the answer is: there is no general solution. On some
systems guessing might help. On those systems most character sets can
-convert to and from UTF-8 encoded @w{ISO 10646} or Unicode text. Beside
+convert to and from UTF-8 encoded @w{ISO 10646} or Unicode text. Beside
this only some very system-specific methods can help. Since the
conversion functions come from loadable modules and these modules must
be stored somewhere in the filesystem, one @emph{could} try to find them
@@ -2333,7 +2333,7 @@ identical.
So far this section has described how modules are located and considered
to be used. What remains to be described is the interface of the modules
-so that one can write new ones. This section describes the interface as
+so that one can write new ones. This section describes the interface as
it is in use in January 1999. The interface will change a bit in the
future but, with luck, only in an upwardly compatible way.
@@ -2918,7 +2918,7 @@ gconv (struct __gconv_step *step, struct __gconv_step_data *data,
/* @r{Run the conversion loop. @code{status} is set}
@r{appropriately afterwards.} */
- /* @r{If this is the last step, leave the loop. There is}
+ /* @r{If this is the last step, leave the loop. There is}
@r{nothing we can do.} */
if (data->__is_last)
@{
diff --git a/manual/errno.texi b/manual/errno.texi
index 6a691fc..41d6639 100644
--- a/manual/errno.texi
+++ b/manual/errno.texi
@@ -1317,7 +1317,7 @@ The function @code{strerror} is declared in @file{string.h}.
The @code{strerror_r} function works like @code{strerror} but instead of
returning the error message in a statically allocated buffer shared by
all threads in the process, it returns a private copy for the
-thread. This might be either some permanent global data or a message
+thread. This might be either some permanent global data or a message
string in the user supplied buffer starting at @var{buf} with the
length of @var{n} bytes.
diff --git a/manual/install.texi b/manual/install.texi
index c0b8d9e..8562bdc 100644
--- a/manual/install.texi
+++ b/manual/install.texi
@@ -185,7 +185,7 @@ the compiler and/or binutils.
If you only specify @samp{--host}, @code{configure} will prepare for a
native compile but use what you specify instead of guessing what your
-system is. This is most useful to change the CPU submodel. For example,
+system is. This is most useful to change the CPU submodel. For example,
if @code{configure} guesses your machine as @code{i686-pc-linux-gnu} but
you want to compile a library for 586es, give
@samp{--host=i586-pc-linux-gnu} or just @samp{--host=i586-linux} and add
diff --git a/manual/llio.texi b/manual/llio.texi
index 69b54c2..6f8adfc 100644
--- a/manual/llio.texi
+++ b/manual/llio.texi
@@ -1083,7 +1083,7 @@ which describe the location and size of each buffer.
@comment BSD
@deftp {Data Type} {struct iovec}
-The @code{iovec} structure describes a buffer. It contains two fields:
+The @code{iovec} structure describes a buffer. It contains two fields:
@table @code
@@ -1141,8 +1141,8 @@ error. The possible errors are the same as in @code{write}.
@end deftypefun
-@c Note - I haven't read this anywhere. I surmised it from my knowledge
-@c of computer science. Thus, there could be subtleties I'm missing.
+@c Note - I haven't read this anywhere. I surmised it from my knowledge
+@c of computer science. Thus, there could be subtleties I'm missing.
Note that if the buffers are small (under about 1kB), high-level streams
may be easier to use than these functions. However, @code{readv} and
@@ -1195,8 +1195,8 @@ The @code{mmap} function creates a new mapping, connected to bytes
is created, which is not removed by closing the file.
@var{address} gives a preferred starting address for the mapping.
-@code{NULL} expresses no preference. Any previous mapping at that
-address is automatically removed. The address you give may still be
+@code{NULL} expresses no preference. Any previous mapping at that
+address is automatically removed. The address you give may still be
changed, unless you use the @code{MAP_FIXED} flag.
@vindex PROT_READ
@@ -1260,7 +1260,7 @@ as the included @code{malloc} automatically uses @code{mmap} where appropriate.
@c Linux has some other MAP_ options, which I have not discussed here.
@c MAP_DENYWRITE, MAP_EXECUTABLE and MAP_GROWSDOWN don't seem applicable to
-@c user programs (and I don't understand the last two). MAP_LOCKED does
+@c user programs (and I don't understand the last two). MAP_LOCKED does
@c not appear to be implemented.
@end vtable
@@ -1405,14 +1405,14 @@ There is no existing mapping in at least part of the given region.
This function can be used to change the size of an existing memory
area. @var{address} and @var{length} must cover a region entirely mapped
-in the same @code{mmap} statement. A new mapping with the same
+in the same @code{mmap} statement. A new mapping with the same
characteristics will be returned with the length @var{new_length}.
-One option is possible, @code{MREMAP_MAYMOVE}. If it is given in
+One option is possible, @code{MREMAP_MAYMOVE}. If it is given in
@var{flags}, the system may remove the existing mapping and create a new
one of the desired length in another location.
-The address of the resulting mapping is returned, or @math{-1}. Possible
+The address of the resulting mapping is returned, or @math{-1}. Possible
error codes include:
@table @code
@@ -1464,11 +1464,11 @@ The valid BSD values for @var{advice} are:
The region should receive no further special treatment.
@item MADV_RANDOM
-The region will be accessed via random page references. The kernel
+The region will be accessed via random page references. The kernel
should page-in the minimal number of pages for each page fault.
@item MADV_SEQUENTIAL
-The region will be accessed via sequential page references. This
+The region will be accessed via sequential page references. This
may cause the kernel to aggressively read-ahead, expecting further
sequential references after any page fault within this region.
@@ -1540,7 +1540,7 @@ There is no existing mapping in at least part of the given region.
@c close dup @acsfd
This function returns a file descriptor that can be used to allocate shared
-memory via mmap. Unrelated processes can use same @var{name} to create or
+memory via mmap. Unrelated processes can use same @var{name} to create or
open existing shared memory objects.
A @var{name} argument specifies the shared memory object to be opened.
@@ -3899,7 +3899,7 @@ There is no process or process group corresponding to @var{pid}.
@gnusystems{} can handle most input/output operations on many different
devices and objects in terms of a few file primitives - @code{read},
@code{write} and @code{lseek}. However, most devices also have a few
-peculiar operations which do not fit into this model. Such as:
+peculiar operations which do not fit into this model. Such as:
@itemize @bullet
diff --git a/manual/locale.texi b/manual/locale.texi
index 8bfd653..45f1e94 100644
--- a/manual/locale.texi
+++ b/manual/locale.texi
@@ -410,7 +410,7 @@ pointer and leaves the current locale unchanged.
@end deftypefun
The path used for finding locale data can be set using the
-@code{LOCPATH} environment variable. The default path for finding
+@code{LOCPATH} environment variable. The default path for finding
locale data is system specific. It is computed from the value given
as the prefix while configuring the C library. This value normally is
@file{/usr} or @file{/}. For the former the complete path is:
diff --git a/manual/maint.texi b/manual/maint.texi
index 659ceae..862b49d 100644
--- a/manual/maint.texi
+++ b/manual/maint.texi
@@ -424,7 +424,7 @@ top level of the @file{sysdeps} directory tree. For example,
files specific to those machine architectures, but not specific to any
particular operating system. There might be subdirectories for
specializations of those architectures, such as
-@w{@file{sysdeps/m68k/68020}}. Code which is specific to the
+@w{@file{sysdeps/m68k/68020}}. Code which is specific to the
floating-point coprocessor used with a particular machine should go in
@w{@file{sysdeps/@var{machine}/fpu}}.
diff --git a/manual/math.texi b/manual/math.texi
index a884cb7..206021c 100644
--- a/manual/math.texi
+++ b/manual/math.texi
@@ -800,7 +800,7 @@ or is very close to 0. It is well-defined for all other values of
@deftypefunx {complex long double} clog10l (complex long double @var{z})
@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
These functions return the base 10 logarithm of the complex value
-@var{z}. Mathematically, this corresponds to the value
+@var{z}. Mathematically, this corresponds to the value
@ifnottex
@math{log (z) = log10 (cabs (z)) + I * carg (z)}
diff --git a/manual/memory.texi b/manual/memory.texi
index 4beb322..0729e70 100644
--- a/manual/memory.texi
+++ b/manual/memory.texi
@@ -1036,7 +1036,7 @@ There was insufficient memory available to satisfy the request.
@end table
-This function was introduced in POSIX 1003.1d. Although this function is
+This function was introduced in POSIX 1003.1d. Although this function is
superseded by @code{aligned_alloc}, it is more portable to older POSIX
systems that do not support @w{ISO C11}.
@end deftypefun
@@ -1361,7 +1361,7 @@ memory consumption of the program.
@defvar __memalign_hook
The value of this variable is a pointer to function that @code{aligned_alloc},
@code{memalign}, @code{posix_memalign} and @code{valloc} use whenever they
-are called. You should define this function to look like @code{aligned_alloc};
+are called. You should define this function to look like @code{aligned_alloc};
that is, like:
@smallexample
@@ -2492,7 +2492,7 @@ add_string (struct obstack *obstack, const char *ptr, int len)
int room = obstack_room (obstack);
if (room == 0)
@{
- /* @r{Not enough room. Add one character slowly,}
+ /* @r{Not enough room. Add one character slowly,}
@r{which may copy to a new chunk and make room.} */
obstack_1grow (obstack, *ptr++);
len--;
diff --git a/manual/message.texi b/manual/message.texi
index 3e32481..b03a14a 100644
--- a/manual/message.texi
+++ b/manual/message.texi
@@ -1584,7 +1584,7 @@ for the @code{iconv_open} function, or a null pointer.
If the @var{codeset} parameter is the null pointer,
@code{bind_textdomain_codeset} returns the currently selected codeset
-for the domain with the name @var{domainname}. It returns @code{NULL} if
+for the domain with the name @var{domainname}. It returns @code{NULL} if
no codeset has yet been selected.
The @code{bind_textdomain_codeset} function can be used several times.
diff --git a/manual/probes.texi b/manual/probes.texi
index b064e33..7dd56d8 100644
--- a/manual/probes.texi
+++ b/manual/probes.texi
@@ -249,21 +249,21 @@ level of 32 implies 768 bits of precision in the mantissa.
@deftp Probe slowexp_p6 (double @var{$arg1}, double @var{$arg2})
This probe is triggered when the @code{exp} function is called with an
input that results in multiple precision computation with precision
-6. Argument @var{$arg1} is the input value and @var{$arg2} is the
+6. Argument @var{$arg1} is the input value and @var{$arg2} is the
computed output.
@end deftp
@deftp Probe slowexp_p32 (double @var{$arg1}, double @var{$arg2})
This probe is triggered when the @code{exp} function is called with an
input that results in multiple precision computation with precision
-32. Argument @var{$arg1} is the input value and @var{$arg2} is the
+32. Argument @var{$arg1} is the input value and @var{$arg2} is the
computed output.
@end deftp
@deftp Probe slowpow_p10 (double @var{$arg1}, double @var{$arg2}, double @var{$arg3}, double @var{$arg4})
This probe is triggered when the @code{pow} function is called with
inputs that result in multiple precision computation with precision
-10. Arguments @var{$arg1} and @var{$arg2} are the input values,
+10. Arguments @var{$arg1} and @var{$arg2} are the input values,
@code{$arg3} is the value computed in the fast phase of the algorithm
and @code{$arg4} is the final accurate value.
@end deftp
@@ -271,7 +271,7 @@ and @code{$arg4} is the final accurate value.
@deftp Probe slowpow_p32 (double @var{$arg1}, double @var{$arg2}, double @var{$arg3}, double @var{$arg4})
This probe is triggered when the @code{pow} function is called with an
input that results in multiple precision computation with precision
-32. Arguments @var{$arg1} and @var{$arg2} are the input values,
+32. Arguments @var{$arg1} and @var{$arg2} are the input values,
@code{$arg3} is the value computed in the fast phase of the algorithm
and @code{$arg4} is the final accurate value.
@end deftp
@@ -393,7 +393,7 @@ address that will be stored in the @code{jmp_buf}.
@deftp Probe longjmp (void *@var{$arg1}, int @var{$arg2}, void *@var{$arg3})
This probe is triggered whenever @code{longjmp} or @code{siglongjmp}
-is called. Argument @var{$arg1} is a pointer to the @code{jmp_buf}
+is called. Argument @var{$arg1} is a pointer to the @code{jmp_buf}
passed as the first argument of @code{longjmp} or @code{siglongjmp},
@var{$arg2} is the return value passed as the second argument of
@code{longjmp} or @code{siglongjmp} and @var{$arg3} is a pointer to
diff --git a/manual/resource.texi b/manual/resource.texi
index b5f0c24..ce48113 100644
--- a/manual/resource.texi
+++ b/manual/resource.texi
@@ -1723,7 +1723,7 @@ running. This number is average over different periods of times
@c it, closes it, without cancellation point, and calls strtod_l with
@c the C locale to convert the strings to doubles.
This function gets the 1, 5 and 15 minute load averages of the
-system. The values are placed in @var{loadavg}. @code{getloadavg} will
+system. The values are placed in @var{loadavg}. @code{getloadavg} will
place at most @var{nelem} elements into the array but never more than
three elements. The return value is the number of elements written to
@var{loadavg}, or -1 on error.
diff --git a/manual/signal.texi b/manual/signal.texi
index 51f68b5..ac84c5e 100644
--- a/manual/signal.texi
+++ b/manual/signal.texi
@@ -2615,7 +2615,7 @@ The prototype for the @code{sigprocmask} function is in @file{signal.h}.
Note that you must not use @code{sigprocmask} in multi-threaded processes,
because each thread has its own signal mask and there is no single process
-signal mask. According to POSIX, the behavior of @code{sigprocmask} in a
+signal mask. According to POSIX, the behavior of @code{sigprocmask} in a
multi-threaded process is ``unspecified''.
Instead, use @code{pthread_sigmask}.
@ifset linuxthreads
diff --git a/manual/socket.texi b/manual/socket.texi
index 6ee8201..1d9d527 100644
--- a/manual/socket.texi
+++ b/manual/socket.texi
@@ -742,7 +742,7 @@ features, and will eventually replace IPv4.
To create a socket in the IPv4 Internet namespace, use the symbolic name
@code{PF_INET} of this namespace as the @var{namespace} argument to
@code{socket} or @code{socketpair}. For IPv6 addresses you need the
-macro @code{PF_INET6}. These macros are defined in @file{sys/socket.h}.
+macro @code{PF_INET6}. These macros are defined in @file{sys/socket.h}.
@pindex sys/socket.h
@comment sys/socket.h
@@ -1110,7 +1110,7 @@ it in the @code{struct in_addr} that @var{addr} points to.
This function converts the IPv4 Internet host address @var{name} from the
standard numbers-and-dots notation into binary data. If the input is
not valid, @code{inet_addr} returns @code{INADDR_NONE}. This is an
-obsolete interface to @code{inet_aton}, described immediately above. It
+obsolete interface to @code{inet_aton}, described immediately above. It
is obsolete because @code{INADDR_NONE} is a valid address
(255.255.255.255), and @code{inet_aton} provides a cleaner way to
indicate error return.
@@ -1126,8 +1126,8 @@ indicate error return.
@c tolower dup @mtslocale
@c isspace dup @mtslocale
This function extracts the network number from the address @var{name},
-given in the standard numbers-and-dots notation. The returned address is
-in host order. If the input is not valid, @code{inet_network} returns
+given in the standard numbers-and-dots notation. The returned address is
+in host order. If the input is not valid, @code{inet_network} returns
@code{-1}.
The function works only with traditional IPv4 class A, B and C network
@@ -1419,7 +1419,7 @@ allows the caller to specify the desired address family (e.g.@:
The @code{gethostbyaddr} function returns information about the host
with Internet address @var{addr}. The parameter @var{addr} is not
really a pointer to char - it can be a pointer to an IPv4 or an IPv6
-address. The @var{length} argument is the size (in bytes) of the address
+address. The @var{length} argument is the size (in bytes) of the address
at @var{addr}. @var{format} specifies the address format; for an IPv4
Internet address, specify a value of @code{AF_INET}; for an IPv6
Internet address, use @code{AF_INET6}.
@@ -1550,15 +1550,15 @@ pointer and the size of the buffer in the @var{buf} and @var{buflen}
parameters.
A pointer to the buffer, in which the result is stored, is available in
-@code{*@var{result}} after the function call successfully returned. The
+@code{*@var{result}} after the function call successfully returned. The
buffer passed as the @var{buf} parameter can be freed only once the caller
has finished with the result hostent struct, or has copied it including all
-the other memory that it points to. If an error occurs or if no entry is
-found, the pointer @code{*@var{result}} is a null pointer. Success is
+the other memory that it points to. If an error occurs or if no entry is
+found, the pointer @code{*@var{result}} is a null pointer. Success is
signalled by a zero return value. If the function failed the return value
is an error number. In addition to the errors defined for
-@code{gethostbyname} it can also be @code{ERANGE}. In this case the call
-should be repeated with a larger buffer. Additional error information is
+@code{gethostbyname} it can also be @code{ERANGE}. In this case the call
+should be repeated with a larger buffer. Additional error information is
not stored in the global variable @code{h_errno} but instead in the object
pointed to by @var{h_errnop}.
@@ -1634,7 +1634,7 @@ allows the caller to specify the desired address family (e.g.@:
The @code{gethostbyaddr_r} function returns information about the host
with Internet address @var{addr}. The parameter @var{addr} is not
really a pointer to char - it can be a pointer to an IPv4 or an IPv6
-address. The @var{length} argument is the size (in bytes) of the address
+address. The @var{length} argument is the size (in bytes) of the address
at @var{addr}. @var{format} specifies the address format; for an IPv4
Internet address, specify a value of @code{AF_INET}; for an IPv6
Internet address, use @code{AF_INET6}.
diff --git a/manual/stdio.texi b/manual/stdio.texi
index 1161a9a..a4364f7 100644
--- a/manual/stdio.texi
+++ b/manual/stdio.texi
@@ -541,7 +541,7 @@ another thread.
@deftypefun void funlockfile (FILE *@var{stream})
@safety{@prelim{}@mtsafe{}@assafe{}@acunsafe{@aculock{}}}
The @code{funlockfile} function releases the internal locking object of
-the stream @var{stream}. The stream must have been locked before by a
+the stream @var{stream}. The stream must have been locked before by a
call to @code{flockfile} or a successful call of @code{ftrylockfile}.
The implicit locking performed by the stream operations do not count.
The @code{funlockfile} function does not return an error status and the
@@ -2547,7 +2547,7 @@ address of a @code{char *} object, and a successful call to
location.
The return value is the number of characters allocated for the buffer, or
-less than zero if an error occurred. Usually this means that the buffer
+less than zero if an error occurred. Usually this means that the buffer
could not be allocated.
Here is how to use @code{asprintf} to get the same result as the
diff --git a/manual/string.texi b/manual/string.texi
index 6dcd4af..4437ddd 100644
--- a/manual/string.texi
+++ b/manual/string.texi
@@ -1308,7 +1308,7 @@ we find a digit in each string - then we enter a special comparison
mode, where each sequence of digits is taken as a whole. If we reach the
end of these two parts without noticing a difference, we return to the
standard comparison mode. There are two types of numeric parts:
-"integral" and "fractional" (those begin with a '0'). The types
+"integral" and "fractional" (those begin with a '0'). The types
of the numeric parts affect the way we sort them:
@itemize @bullet
@@ -2260,7 +2260,7 @@ on different systems.
@comment XPG
@deftypefun {char *} basename (const char *@var{path})
@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
-This is the standard XPG defined @code{basename}. It is similar in
+This is the standard XPG defined @code{basename}. It is similar in
spirit to the GNU version, but may modify the @var{path} by removing
trailing '/' characters. If the @var{path} is made up entirely of '/'
characters, then "/" will be returned. Also, if @var{path} is
diff --git a/manual/time.texi b/manual/time.texi
index d46d2c8..d6085ed 100644
--- a/manual/time.texi
+++ b/manual/time.texi
@@ -1335,7 +1335,7 @@ Ordinary characters appearing in the @var{template} are copied to the
output string @var{s}; this can include multibyte character sequences.
Conversion specifiers are introduced by a @samp{%} character, followed
by an optional flag which can be one of the following. These flags
-are all GNU extensions. The first three affect only the output of
+are all GNU extensions. The first three affect only the output of
numbers:
@table @code
diff --git a/manual/users.texi b/manual/users.texi
index 93b25eb..a14a256 100644
--- a/manual/users.texi
+++ b/manual/users.texi
@@ -71,7 +71,7 @@ in a data base which you can access as described in @ref{User Database}.
@cindex group ID
Users are classified in @dfn{groups}. Each user name belongs to one
@dfn{default group} and may also belong to any number of
-@dfn{supplementary groups}. Users who are members of the same group can
+@dfn{supplementary groups}. Users who are members of the same group can
share resources (such as files) that are not accessible to users who are
not a member of that group. Each group has a @dfn{group name} and
@dfn{group ID}. @xref{Group Database}, for how to find information
@@ -830,7 +830,7 @@ special user.
Be cautious about using the @code{exec} functions in combination with
changing the effective user ID. Don't let users of your program execute
arbitrary programs under a changed user ID. Executing a shell is
-especially bad news. Less obviously, the @code{execlp} and @code{execvp}
+especially bad news. Less obviously, the @code{execlp} and @code{execvp}
functions are a potential risk (since the program they execute depends
on the user's @code{PATH} environment variable).
-----------------------------------------------------------------------
Summary of changes:
ChangeLog | 19 +++++++++++++++++++
manual/arith.texi | 6 +++---
manual/charset.texi | 10 +++++-----
manual/errno.texi | 2 +-
manual/install.texi | 2 +-
manual/llio.texi | 26 +++++++++++++-------------
manual/locale.texi | 2 +-
manual/maint.texi | 2 +-
manual/math.texi | 2 +-
manual/memory.texi | 6 +++---
manual/message.texi | 2 +-
manual/probes.texi | 10 +++++-----
manual/resource.texi | 2 +-
manual/signal.texi | 2 +-
manual/socket.texi | 22 +++++++++++-----------
manual/stdio.texi | 4 ++--
manual/string.texi | 4 ++--
manual/time.texi | 2 +-
manual/users.texi | 4 ++--
19 files changed, 74 insertions(+), 55 deletions(-)
hooks/post-receive
--
GNU C Library master sources