gdb archive
thread index for November, 2002
This is the mail archive of the
gdb@sourceware.org
mailing list for the GDB project.
Messages are ordered newest-to-oldest in this index. The newest
threads will be at the top of this page, the oldest will be at the bottom.
Within a single thread, the first mail note is the START of the thread;
the notes following that are in the chronological order of when they
were received. So globally, newest messages are at the top, but within
a thread, the oldest (the start of the thread) is at the top.
If you think about it, it is confusing. Just go with the flow and
everything will be all right.
- bye-bye boolean,
Alan Modra
- There is always a thread,
Andrew Cagney
- Putting in my top level changes,
Nathanael Nerode
- Ctrl-c problem,
Richard Brunelle
- Unwinding the stack for PA-RISC and HP-UX 10.20/ backtrace,
Roland Egger
- RE: simulator question , please reply me,
msarasa
- add-symbol-file parsing,
Mark Santcroos
- Re: [patch] remove Tix,
Nick Kelsey
- info del Diluvio,
Mariana Moretti
- target sim question,
msarasa
- PATCH : H8300 Simulator File I/O Implementation,
D.Venkatasubramanian, Noida
- Re: (toplevel patch) Real targets for make.,
Bonzini
- Two files with embedded control-M's,
todd whitesel
- JTAG support for GDB,
Benjamin Tze-Kit Lee
- Porting GDB - How to start?,
James Sampson
- gdb and Dll,
Heiko Gerdau
- Needs Info about libGDB,
Pankaj Laddha
- [ADMINISTRIVIA] New RDA mailing list,
Christopher Faylor
- threads and the new NPTL thread library,
Elena Zannoni
- Change to breakpoint.c breaks insight on trunk,
Nick Kelsey
- Hacking a defined simulator,or connecting an existing one,
msarasa
- PATCH: SH Simulator - MAC.L implementation and MAC.W correction,
Shrinivas Atre
- Always multi-arch the SPARC, dump sparclet?,
Andrew Cagney
- 5.3?,
Andrew Cagney
- handling async stop condition correctly,
Nick Kelsey
- Porting GDB - Where to start?,
James Sampson
- redirecting output,
Per Fransson
- Problems with floatformat on Alpha,
Daniel Jacobowitz
- dump srec vs. 64-bit,
Daniel Jacobowitz
- "Cannot find thread 1024: generic error" with gdb 5.2.1,
Andrew Corsella
- [Fwd: Re: Toplevel: Maybe-ize GDB_TK.],
Nathanael Nerode
- RE: como hablamos - fX1,
Natalia
- Examining STL constructs in GDB,
Saeed Eskandari
- Emacs and GDB,
a2782
- Re: gdb 5.2.90-cvs, gcc 3.2-7 and lyx thread problem,
Ben Stanley
- libgdb,
a2782
- When to build RDA?,
Daniel Jacobowitz
- Proposed enhancement to RDA, the remote debug agent,
Michael Snyder
- problem with sidcpuutil.h,
Dzung Nguyen
- allocate_objfile (NULL, 0),
David Carlton
- i386 + frameless functions that play with the stack,
Daniel Jacobowitz
- weekly cvs tarball uses unknown pserver,
Ben Stanley
- [Fwd: Re: gdb/725: Crash using debug target and regcaches (in 5.3branch?)],
Andrew Cagney
- Interpreter and TUI problems on 5.3 branch and head,
Daniel Jacobowitz
- adding a new simulator,
msarasa
- Fixing "Unrecognized File Format"? (I'm desperate for help),
James Sampson
- dejagnu,
bemis
- Does the GDB need a symbol table?,
James Sampson
- [5.3] What's the hold up?,
Andrew Cagney
- gdbserver on PowerPC Issues,
Paul Mundt
- switching stack/frames in gdb,
Sunil Alankar
- ARM stack alignment on hand called functions,
Kris Warkentin
- Re: ARM stack alignment on hand called functions,
Richard Earnshaw
- Re: ARM stack alignment on hand called functions,
Kris Warkentin
- Re: ARM stack alignment on hand called functions,
Richard Earnshaw
- Re: ARM stack alignment on hand called functions,
Kris Warkentin
- Re: ARM stack alignment on hand called functions,
Andrew Cagney
- Re: ARM stack alignment on hand called functions,
Kris Warkentin
- Re: ARM stack alignment on hand called functions,
Andrew Cagney
- Re: ARM stack alignment on hand called functions,
Richard Earnshaw
- Re: ARM stack alignment on hand called functions,
Richard Earnshaw
- Re: ARM stack alignment on hand called functions,
Kris Warkentin
- Re: ARM stack alignment on hand called functions,
Kris Warkentin
- Re: ARM stack alignment on hand called functions,
Richard Earnshaw
- <Possible follow-ups>
- Re: ARM stack alignment on hand called functions,
Kris Warkentin
- change target for a simulated target,
msarasa
- Supported Targets,
James Sampson
- Setting Prog pointer back in the prog,
Jean-Eric Cuendet
- GDB's COFF back-ends?,
James Sampson
- Processing of convenience variables for scripts ...,
Richard Sharpe
- getting lookup_symbol to find aliases,
Nick Kelsey
- [5.3] Alpha and that mdebug problem?,
Andrew Cagney
- gdb 5.2.1-4, gcc 3.2-7 and lyx thread problem,
Ben Stanley
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Andrew Cagney
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Alan Modra
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Andrew Cagney
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Klee Dienes
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Andrew Cagney
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Alan Modra
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Klee Dienes
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Andrew Cagney
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Alan Modra
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Ian Lance Taylor
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Alan Modra
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Andrew Cagney
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Hans-Peter Nilsson
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Ian Lance Taylor
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Alan Modra
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Andrew Cagney
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Alan Modra
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Doug Evans
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Ben Elliston
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Klee Dienes
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
David O'Brien
- <Possible follow-ups>
- Re: [RFA] Replace strdup with xstrdup in tic30-dis.c,
Doug Evans
- EXCUSE ME!something was wrong with my email didn't want to post four times the same,
msarasa
- simulated target,
msarasa
- Adding a target at build?,
James Sampson
- Can't attach over NFS?,
Jim Blandy
- Re: Final separate debug info patch,
Jim Blandy
- [RFA] Add stabs entries for coalesced symbols.,
Klee Dienes
- gdb xml output with make check,
bemis
- compatibility between gdb and stub,
Romain Berrendonner
- Re: compatibility between gdb and stub,
Andrew Cagney
- Message not available
- Re: compatibility between gdb and stub,
Kevin Buettner
- Re: compatibility between gdb and stub,
Steven Johnson
- Re: compatibility between gdb and stub,
Daniel Jacobowitz
- Re: compatibility between gdb and stub,
Romain Berrendonner
- Message not available
- Re: compatibility between gdb and stub,
Kevin Buettner
- Re: compatibility between gdb and stub,
Andrew Cagney
- Re: compatibility between gdb and stub,
Romain Berrendonner
- Re: compatibility between gdb and stub,
Andrew Cagney
- Re: compatibility between gdb and stub,
Steven Johnson
- Re: compatibility between gdb and stub,
Andrew Cagney
- Message not available
- Re: compatibility between gdb and stub,
Kevin Buettner
Apple's GDB,
nitin kumbhar
Re: PR 207, 662,
Andrew Cagney
Re: gdb/829: GDB doesn't know about using directives,
Elena Zannoni
Blocking getchar() call,
Russell
what parts of GDB handle variables with compound names?,
David Carlton
psymtab/symtab error,
Paul Koning
getting gdb output redirected to a file,
Joe Knowling
Debugging GDB with GDB,
James Sampson
gdb 5.2.1 on Mandrake 7.2,
Jason Spence
GDB/MI and target output,
Antonio R. Costa
Setting up GDB,
James Sampson
Internal error in GDB,
Steven Johnson
Content Management System,
B2B
Is gdb.c++/local.exp broken?,
Jim Blandy
set env affects host?,
Graeme Peterson
Behavior of 'until' command,
Elena Zannoni
SID compilation FAIL on alphaev56,
bemis
Unable to restore previously selected frame: Observations,
Ruppert
gdb/mi 790,
J. Johnston
Source files as symlinks for 5.2.1,
Albert Chin
regression in gdb.base/dump.exp,
David Carlton
gdbserver: configure permissions,
Robert Schwebel
Cross gdb for ARM,
Robert Schwebel
[5.3] Fixes for GDB on x86 Solaris?,
Andrew Cagney
[5.3] Does GDB build on GNU/Linux s390?,
Andrew Cagney
Using CCS output files in GDB?,
James Sampson
FRAME_CHAIN() -> frame_id_unwind() ?,
Andrew Cagney
[RFC] File-I/O, target access to host file system via gdb remote protocol enhancement,
Corinna Vinschen
gdb-5.2.1/g++-3.1 on Solaris5.7 severely broken?!,
nkiesel
Complicated config puzzle (m68k-apollo-bsd, v810, aix4.3+ maintainers please reply),
Nathanael Nerode
Two feature suggestions,
Tom Tromey
A few things we've been up to at Apple lately,
Jason Molenda
Question about resolving symbol information from so's loaded via dlopen.,
Kevin \"Sharpie\" Endres
Namespace testcases,
Elena Zannoni
[PING] [RFC] Include BDF machine type in OS ABI selection,
Mark Kettenis
debugging sh4 in mi mode,
Kris Warkentin
Re: Objective C in Makefile?,
Andrew Cagney
Re: I'm sorry but....,
Andrew Cagney
Re: [maint] New title for ``global write maintainer''?,
Andrew Cagney
Re: HP catchpoint code,
Andrew Cagney
Re: [lkcd-general] dump format,
Piet Delaney
Problems running GDB-5.1.,
Trant, Bert
gcc 3.2, gdb 5.2.1, solaris2.8 sparc, slow,
Mark Crosland
- Re: gcc 3.2, gdb 5.2.1, solaris2.8 sparc, slow,
Mark Crosland
- <Possible follow-ups>
- RE: gcc 3.2, gdb 5.2.1, solaris2.8 sparc, slow,
Garriss, Michael
- RE: gcc 3.2, gdb 5.2.1, solaris2.8 sparc, slow,
Elena Zannoni
- RE: gcc 3.2, gdb 5.2.1, solaris2.8 sparc, slow,
Mark Crosland
- Re: gcc 3.2, gdb 5.2.1, solaris2.8 sparc, slow,
Daniel Jacobowitz
- RE: gcc 3.2, gdb 5.2.1, solaris2.8 sparc, slow,
Elena Zannoni
broken link in http://sourceware.org/gdb/links/,
Doug Evans
Re: should minimal symbols be able to force lookup_symbol to return NULL?,
Jim Blandy
Re: Petr Sorfa's Dwarf 2 changes,
Jim Blandy
Re: Agent code for GDB trace collection,
Jim Blandy
gdb crashes,
Elias Athanasopoulos
-Wimplicit,
Elias Athanasopoulos
STEP and CONTINUE in GDB REMOTE,
Jan Van Belle
Error message?,
Triumph The insult comic dog
Status of c++ branches?,
Elena Zannoni
software single step,
Stuart Hughes
HPUX `make',
Daniel Jacobowitz
How to access global variable over kgdb,
Gangfeng.Kong
How I learned to stop worrying and love decode_line_1,
David Carlton
Re: set processor command,
Elena Zannoni
Re: why is gdb 5.2 so slow,
wim delvaux
<Possible follow-ups>
RE: why is gdb 5.2 so slow,
Howell, David P
Mail converted by MHonArc 2.5.13