This is the mail archive of the
gdb@sources.redhat.com
mailing list for the GDB project.
Using GDB with M32R MSA2000 Board
- To: gdb at sourceware dot cygnus dot com
- Subject: Using GDB with M32R MSA2000 Board
- From: "Noah Aklilu" <naklilu at ualberta dot ca>
- Date: Tue, 9 Jan 2001 19:20:04 -0700
Hi
I trying to get gdb (really insight 5.0)
to talk to a Mitusbishi MSA2000G01 (the m32r
evaluation board). I switched the board to monitor/
self-debugging mode (instead of the default db32r ethernet
mode) and get the Mon2000> prompt
using a terminal emulator. When I tell gdb to
connect to the same com port using mon2000 as the
target (target mon2000 /dev/com1) it comes back with the error
listed below.
I tried other target modes such as target m32r /dev/com1
but it simply times out. I am running gdb/insight under cygwin
1.1.7 on an NT 4 host (and compiled it there as well). Any
comments/tips will be appreciated.
Noah.
-- start here
monitor_supply_register (21): bad value from monitor: 7FFFFFF0
psw =
000000C0 (BSM=0, BIE=0,
BC=0, SM=1, IE=1, C=0)
bpc = 00000000
r0 = 00000000 r1 = 00000000 r2 = 00000000 r3 = 00000000
r4 = 00000000 r5 = 00000000 r6 = 00000000 r7 = 00000000
r8 = 00000000 r9 = 00000000 r10 = 00000000 r11 = 00000000
r12 = 00000000 r13 = 00000000 r14 = 00000000
spu = 009E3200 spi = 009E4200 acc = 00000000:00000000
>.
while executing
"gdb_cmd "set remotebaud $baud""
(object "::.targetselection0.targetselection" method
"::TargetSelection::change_baud" body line 4)
invoked from within
"::.targetselection0.targetselection change_baud
.targetselection0.targetselection.f.lab.lf.childsite.cb 9600"
(in namespace inscope "::TargetSelection" script line 1)
invoked from within
"namespace inscope ::TargetSelection
{::.targetselection0.targetselection
change_baud}
.targetselection0.targetselection.f.lab.lf.childsite.cb 9600"
("after" script)errorCode is NONE
--end here
------------------------------------------
Noah Aklilu
http://www.ee.ualberta.ca/~aklilu/
naklilu@ualberta.ca