Failures on Debian-x86_64-native-extended-gdbserver-m64, branch master

[sergiodj+buildbot at redhat dot com]

Buildslave:
	wildebeest-debian-wheezy-x86_64

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-x86_64-native-extended-gdbserver-m64/builds/1703>

Commit(s) tested:
	95cf586902b681310e63ee06d89ba2498d1d5dcf

Author(s) (in the same order as the commits):
	Doug Evans <xdje42@gmail.com>

Subject:
	objfiles.h,psympriv.h,psymtab.c: Whitespace.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-x86_64-native-extended-gdbserver-m64/.git/tree/?h=master&id=c117ffc665ac08833d75d8595cb8f5a831ebe3d0>

*** Regressions found ***
============================
new FAIL: gdb.base/attach.exp: continue until exit (timeout)
new FAIL: gdb.base/attach-pie-noexec.exp: attach (timeout)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: continue trips on nested permanent bp: continue to breakpoint: test_signal_nested_done (timeout)
PASS -> FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: continue trips on nested permanent bp: p counter
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/multi-forks.exp: set follow-fork child
new FAIL: gdb.base/multi-forks.exp: setting breakpoint at 36
new FAIL: gdb.base/sigstep.exp: next to handler: break handler (timeout)
PASS -> FAIL: gdb.base/sigstep.exp: next to handler: performing next
new FAIL: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler: performing next (timeout)
new FAIL: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler: performing continue (timeout)
new FAIL: gdb.cp/mb-inline.exp: run to breakpoint (timeout)
PASS -> FAIL: gdb.cp/mb-inline.exp: run to breakpoint 2
PASS -> FAIL: gdb.cp/mb-inline.exp: disabling location: disable
new FAIL: gdb.gdb/selftest.exp: Disassemble main (timeout)
new FAIL: gdb.go/chan.exp: Going to first breakpoint (timeout)
PASS -> FAIL: gdb.go/chan.exp: disable
new FAIL: gdb.go/hello.exp: setting breakpoint at hello.go:10
new FAIL: gdb.go/integers.exp: setting breakpoint at integers.go:12
new FAIL: gdb.mi/mi2-amd64-entry-value.exp: mi runto main (timeout)
new FAIL: gdb.mi/mi-exit-code.exp: second run: mi runto main (timeout)
new FAIL: gdb.multi/multi-arch.exp: starting inferior 2
new FAIL: gdb.python/python.exp: source source2.py (timeout)
new FAIL: gdb.reverse/break-precsave.exp: save process recfile (timeout)
new FAIL: gdb.reverse/break-precsave.exp: Kill process, prepare to debug log file (timeout)
new FAIL: gdb.reverse/break-precsave.exp: reload precord save file (timeout)
new FAIL: gdb.reverse/break-precsave.exp: set breakpoint on foo (got interactive prompt)
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: foo (got interactive prompt)
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: bar (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: go to end of main forward (the program is no longer running)
PASS -> FAIL: gdb.reverse/break-precsave.exp: set reverse
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: bar backward (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: foo backward (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: main backward (the program is no longer running)
PASS -> FAIL: gdb.reverse/break-precsave.exp: set forward
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: foo (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: bar (the program is no longer running) <<2>>
new FAIL: gdb.reverse/break-precsave.exp: end of record log (the program is no longer running)
new FAIL: gdb.reverse/until-precsave.exp: reload core file (timeout)
new FAIL: gdb.reverse/until-reverse.exp: advance to factorial (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/continue-pending-status.exp: attempt 2: caught interrupt (timeout)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 3: set break in tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 9: caught interrupt (timeout)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 10: set break in tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 11: caught interrupt (timeout)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 12: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 12: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 12: continue for ctrl-c (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 12: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 13: continue to tight loop (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 13: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 13: continue for ctrl-c (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 13: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 14: continue to tight loop (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 14: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 14: continue for ctrl-c (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 14: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 15: continue to tight loop (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 15: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 15: continue for ctrl-c (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 15: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 16: continue to tight loop (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 16: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 16: continue for ctrl-c (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 16: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 17: continue to tight loop (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 17: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 17: continue for ctrl-c (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 17: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 18: continue to tight loop (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 18: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 18: continue for ctrl-c (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 18: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 19: continue to tight loop (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 19: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 19: continue for ctrl-c (the program is no longer running)
new FAIL: gdb.threads/continue-pending-status.exp: attempt 19: caught interrupt
new FAIL: gdb.threads/current-lwp-dead.exp: continue to breakpoint: fn_return (timeout)
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
new FAIL: gdb.threads/linux-dp.exp: continue to breakpoint: thread 5's print, pass: 7 (timeout)
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=off: signal thr2: thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=off: signal thr2: queue-signal SIGUSR1
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=off: signal thr2: switch back to thread 1
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=off: signal thr2: continue to sigusr1_handler
new FAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=0: Can't run to main
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=continue: stop all threads (with lock) (timeout)
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=continue: setting breakpoint at 80 if arg != 0
new FAIL: gdb.threads/tid-reuse.exp: continue to breakpoint: after_reuse_time (timeout)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the first fork (timeout)
new FAIL: gdb.trace/collection.exp: break end (got interactive prompt)
new FAIL: gdb.trace/collection.exp: collect $regs: set tracepoint (got interactive prompt)
new FAIL: gdb.trace/collection.exp: collect $regs: advance to begin (the program is no longer running)
PASS -> FAIL: gdb.trace/collection.exp: collect $regs: start trace experiment
new FAIL: gdb.trace/collection.exp: collect $regs: run trace experiment (the program is no longer running)
PASS -> FAIL: gdb.trace/collection.exp: collect $regs: tfind test frame
new FAIL: gdb.trace/collection.exp: print /x $rbp
new FAIL: gdb.trace/collection.exp: print /x $rsp
new FAIL: gdb.trace/collection.exp: print /x $rip
PASS -> FAIL: gdb.trace/collection.exp: collect $regs: cease trace debugging
new FAIL: gdb.trace/unavailable.exp: unavailable registers: save ctf trace file (timeout)
new FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: tsave unavailable.locals.tfile (timeout)
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: save ctf trace file
new FAIL: gdb.xml/tdesc-xinclude.exp: set tdesc filename gdb.xml/includes.xml (timeout)
new FAIL: gdb.xml/tdesc-xinclude.exp: set tdesc filename gdb.xml/bad-include.xml (timeout)
PASS -> FAIL: gdb.xml/tdesc-xinclude.exp: set tdesc filename gdb.xml/loop.xml
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.base/a2-run.exp: run "a2-run" with shell (timeout)
new FAIL: gdb.base/attach.exp: continue until exit (timeout)
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/attach-pie-misread.exp: shift-by-1: detach (the program is no longer running)
new FAIL: gdb.base/attach-pie-misread.exp: shift-by-2: detach (the program is no longer running)
new FAIL: gdb.base/attach-pie-noexec.exp: attach (timeout)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: continue trips on nested permanent bp: continue to breakpoint: test_signal_nested_done (timeout)
PASS -> FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: continue trips on nested permanent bp: p counter
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 6 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 8 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 9 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 10 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one
new FAIL: gdb.base/checkpoint-ns.exp: break3 one (the program exited)
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 two
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output two
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: break4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 1
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 2
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 3
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 4
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 5
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 6
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 7
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 8 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 8
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 9
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 10
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork three (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork four (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork five (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints two
new FAIL: gdb.base/checkpoint-ns.exp: break2 with many checkpoints
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints with at least 600 checkpoints
PASS -> FAIL: gdb.base/multi-forks.exp: set follow-fork child
new FAIL: gdb.base/multi-forks.exp: setting breakpoint at 36
new FAIL: gdb.base/sigstep.exp: next to handler: break handler (timeout)
PASS -> FAIL: gdb.base/sigstep.exp: next to handler: performing next
new FAIL: gdb.base/sigstep.exp: displaced=off: next on breakpoint, skip handler: performing next (timeout)
new FAIL: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler: performing continue (timeout)
new FAIL: gdb.cp/mb-inline.exp: run to breakpoint (timeout)
PASS -> FAIL: gdb.cp/mb-inline.exp: run to breakpoint 2
PASS -> FAIL: gdb.cp/mb-inline.exp: disabling location: disable
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
new FAIL: gdb.gdb/selftest.exp: Disassemble main (timeout)
new FAIL: gdb.go/chan.exp: Going to first breakpoint (timeout)
PASS -> FAIL: gdb.go/chan.exp: disable
new FAIL: gdb.go/hello.exp: setting breakpoint at hello.go:10
new FAIL: gdb.go/integers.exp: setting breakpoint at integers.go:12
new FAIL: gdb.linespec/explicit.exp: strace -m gdbfoobarbaz
new FAIL: gdb.mi/mi2-amd64-entry-value.exp: mi runto main (timeout)
new FAIL: gdb.mi/mi-exit-code.exp: second run: mi runto main (timeout)
new FAIL: gdb.multi/multi-arch.exp: starting inferior 2
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
new FAIL: gdb.python/py-sync-interp.exp: attach and where (timeout)
new FAIL: gdb.python/python.exp: source source2.py (timeout)
new FAIL: gdb.reverse/break-precsave.exp: save process recfile (timeout)
new FAIL: gdb.reverse/break-precsave.exp: Kill process, prepare to debug log file (timeout)
new FAIL: gdb.reverse/break-precsave.exp: reload precord save file (timeout)
new FAIL: gdb.reverse/break-precsave.exp: set breakpoint on foo (got interactive prompt)
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: foo (got interactive prompt)
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: bar (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: go to end of main forward (the program is no longer running)
PASS -> FAIL: gdb.reverse/break-precsave.exp: set reverse
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: bar backward (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: foo backward (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: main backward (the program is no longer running)
PASS -> FAIL: gdb.reverse/break-precsave.exp: set forward
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: foo (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: bar (the program is no longer running) <<2>>
new FAIL: gdb.reverse/break-precsave.exp: end of record log (the program is no longer running)
new FAIL: gdb.reverse/until-precsave.exp: reload core file (timeout)
new FAIL: gdb.reverse/until-reverse.exp: advance to factorial (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads (timeout)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/continue-pending-status.exp: attempt 2: caught interrupt (timeout)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 3: set break in tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 9: caught interrupt (timeout)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 10: set break in tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 11: caught interrupt (timeout)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 12: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 12: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 12: continue for ctrl-c (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 12: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 13: continue to tight loop (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 13: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 13: continue for ctrl-c (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 13: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 14: continue to tight loop (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 14: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 14: continue for ctrl-c (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 14: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 15: continue to tight loop (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 15: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 15: continue for ctrl-c (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 15: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 16: continue to tight loop (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 16: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 16: continue for ctrl-c (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 16: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 17: continue to tight loop (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 17: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 17: continue for ctrl-c (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 17: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 18: continue to tight loop (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 18: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 18: continue for ctrl-c (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 18: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 19: continue to tight loop (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 19: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 19: continue for ctrl-c (the program is no longer running)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 19: caught interrupt
new FAIL: gdb.threads/current-lwp-dead.exp: continue to breakpoint: fn_return (timeout)
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
new FAIL: gdb.threads/linux-dp.exp: continue to breakpoint: thread 5's print, pass: 7 (timeout)
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=off: signal thr2: thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=off: signal thr2: queue-signal SIGUSR1
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=off: signal thr2: switch back to thread 1
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=off: signal thr2: continue to sigusr1_handler
new FAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=0: Can't run to main
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=continue: stop all threads (with lock) (timeout)
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=continue: setting breakpoint at 80 if arg != 0
new FAIL: gdb.threads/tid-reuse.exp: continue to breakpoint: after_reuse_time (timeout)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the first fork (timeout)
new FAIL: gdb.trace/collection.exp: break end (got interactive prompt)
new FAIL: gdb.trace/collection.exp: collect $regs: set tracepoint (got interactive prompt)
new FAIL: gdb.trace/collection.exp: collect $regs: advance to begin (the program is no longer running)
PASS -> FAIL: gdb.trace/collection.exp: collect $regs: start trace experiment
new FAIL: gdb.trace/collection.exp: collect $regs: run trace experiment (the program is no longer running)
PASS -> FAIL: gdb.trace/collection.exp: collect $regs: tfind test frame
new FAIL: gdb.trace/collection.exp: print /x $rbp
new FAIL: gdb.trace/collection.exp: print /x $rsp
new FAIL: gdb.trace/collection.exp: print /x $rip
PASS -> FAIL: gdb.trace/collection.exp: collect $regs: cease trace debugging
new FAIL: gdb.trace/unavailable.exp: unavailable registers: save ctf trace file (timeout)
new FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: tsave unavailable.locals.tfile (timeout)
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: save ctf trace file
new FAIL: gdb.xml/tdesc-xinclude.exp: set tdesc filename gdb.xml/includes.xml (timeout)
new FAIL: gdb.xml/tdesc-xinclude.exp: set tdesc filename gdb.xml/bad-include.xml (timeout)
PASS -> FAIL: gdb.xml/tdesc-xinclude.exp: set tdesc filename gdb.xml/loop.xml
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
FAIL: gdb.dwarf2/gdb-index.exp: touch binary
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call============================