This is the mail archive of the gdb-testers@sourceware.org mailing list for the GDB project.
Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]
Failures on Debian-x86_64-native-extended-gdbserver-m64, branch master

From: sergiodj+buildbot at redhat dot com
To: gdb-testers at sourceware dot org
Date: Sat, 25 Apr 2015 03:18:11 -0400
Subject: Failures on Debian-x86_64-native-extended-gdbserver-m64, branch master
Authentication-results: sourceware.org; auth=none
Buildslave:
	wildebeest-debian-wheezy-x86_64

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-x86_64-native-extended-gdbserver-m64/builds/893>

Commit(s) tested:
	6faec16b1c633a8043791e0d15d7e7f1c8d448c1

Author(s) (in the same order as the commits):
	Andrew Burgess <andrew.burgess@embecosm.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-x86_64-native-extended-gdbserver-m64/.git/tree/?h=master&id=47c3c9c631998936aace9acd55dd7ed73a5298de>

*** Regressions found ***
============================
new FAIL: gdb.base/attach-pie-misread.exp: shift-by-1: detach (the program is no longer running)
new FAIL: gdb.base/attach-pie-misread.exp: shift-by-2: detach (the program is no longer running)
new FAIL: gdb.base/attach.exp: starting with --pid (timeout)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=0: continue trips on nested permanent bp: continue to breakpoint: test_signal_nested_done (timeout)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=0: continue trips on nested permanent bp: setting breakpoint at test_signal_nested_done (timeout)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=on, sw_watchpoint=1: setup: next over setup (timeout)
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieYES: reach-(_dl_debug_state|dl_main): reach (timeout)
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieYES: reach-(_dl_debug_state|dl_main): set stop-on-solib-events 0
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
new FAIL: gdb.base/catch-gdb-caused-signals.exp: Can't run to main to make the tests
new FAIL: gdb.base/catch-load.exp: plain unload with stop-on-solib-events: can't run to main
new FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=off: detach program (timeout)
new FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=off: dprintf insertion (timeout)
PASS -> FAIL: gdb.base/gdb-sigterm.exp: 50 SIGTERM passes
new FAIL: gdb.base/reread.exp: run to foo() second time (timeout)
new FAIL: gdb.base/sigall.exp: advance to 56 (timeout)
new FAIL: gdb.base/sigall.exp: send signal 58 (timeout)
new FAIL: gdb.base/sigbpt.exp: Verify that SIGSEGV occurs at the last STEPI insn (none bowler)
new FAIL: gdb.base/sigbpt.exp: advance to the bowler (timeout)
PASS -> FAIL: gdb.base/sigbpt.exp: cont bp after segv; clear breakpoint 0 of 2
PASS -> FAIL: gdb.base/sigbpt.exp: cont bp after segv; continue to breakpoint at fault
PASS -> FAIL: gdb.base/sigbpt.exp: cont bp after segv; set breakpoint 0  of 2
PASS -> FAIL: gdb.base/sigbpt.exp: cont bp after segv; stepi fault
PASS -> FAIL: gdb.base/sigbpt.exp: cont bp before and after segv; clear breakpoint 0 of 3
PASS -> FAIL: gdb.base/sigbpt.exp: cont bp before and after segv; continue to breakpoint at fault
PASS -> FAIL: gdb.base/sigbpt.exp: cont bp before and after segv; set breakpoint 0  of 3
PASS -> FAIL: gdb.base/sigbpt.exp: cont bp before and after segv; stepi fault
PASS -> FAIL: gdb.base/sigbpt.exp: cont; continue to breakpoint at fault
PASS -> FAIL: gdb.base/sigbpt.exp: cont; stepi fault
PASS -> FAIL: gdb.base/sigbpt.exp: stepi bp before and at segv; clear breakpoint 1 of 2
PASS -> FAIL: gdb.base/sigbpt.exp: stepi bp before and at segv; set breakpoint 1 of 2
PASS -> FAIL: gdb.base/sigbpt.exp: stepi bp before segv; clear breakpoint 0 of 1
PASS -> FAIL: gdb.base/sigbpt.exp: stepi bp before segv; set breakpoint 0 of 1
new FAIL: gdb.base/sigbpt.exp: stepping to fault (timeout)
new FAIL: gdb.base/signals.exp: backtrace from handler when calling func1 (timeout)
PASS -> FAIL: gdb.base/signals.exp: continue
PASS -> FAIL: gdb.base/signals.exp: p count #1
new FAIL: gdb.base/signals.exp: p func1 () #1 (timeout)
new FAIL: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, to handler: backtrace (pattern 1)
new FAIL: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, to handler: performing continue (timeout)
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint: performing continue
new FAIL: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint: watch $convenience (timeout)
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, no handler: advanced
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, no handler: get next PC
new FAIL: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, no handler: set done (timeout)
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint: advanced
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint: get next PC
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint: performing nexti
new FAIL: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint: watch $convenience (timeout)
new FAIL: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, no handler: performing stepi (timeout)
new FAIL: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, no handler: set done (timeout)
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: advanced
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: get next PC
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: set done
new FAIL: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: watch $convenience (timeout)
new FAIL: gdb.base/solib-display.exp: IN: after rerun (2) (timeout)
new FAIL: gdb.base/solib-overlap.exp: 0x40000000: detach (the program is no longer running)
PASS -> FAIL: gdb.base/step-test.exp: next 2
PASS -> FAIL: gdb.base/step-test.exp: next 3
new FAIL: gdb.base/step-test.exp: step 1 (timeout)
new FAIL: gdb.base/step-test.exp: step 3 (timeout)
new FAIL: gdb.base/until.exp: info breakpoints (got interactive prompt)
new FAIL: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (sw) (timeout)
PASS -> FAIL: gdb.cp/pr17132.exp: p sizeof (a_ptr->func())
new FAIL: gdb.cp/pr17132.exp: ptype a->func () (timeout)
new FAIL: gdb.cp/re-set-overloaded.exp: start (timeout)
new FAIL: gdb.cp/try_catch.exp: continue to breakpoint: marker 1-catch (timeout)
new FAIL: gdb.gdb/observer.exp: second observer removed; reset first observer counter (timeout)
PASS -> FAIL: gdb.gdb/observer.exp: second observer removed; reset second observer counter
new FAIL: gdb.linespec/break-ask.exp: continue to breakpoint: body_elsewhere other (timeout)
new FAIL: gdb.linespec/break-ask.exp: expect breakpoint other (timeout)
PASS -> FAIL: gdb.linespec/break-ask.exp: info source other
new FAIL: gdb.linespec/skip-two.exp: dupname ignored for thefile.cc (timeout)
new FAIL: gdb.linespec/skip-two.exp: step into dupname (timeout)
new FAIL: gdb.mi/mi-pending.exp: Run till MI pending breakpoint on pendfunc3 on thread 2 (timeout)
new FAIL: gdb.mi/mi-reg-undefined.exp: mi runto stop_frame (timeout)
PASS -> FAIL: gdb.mi/mi-reg-undefined.exp: stack frame listing
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: run to mi-var-rtti.cc:201 (set breakpoint)
new FAIL: gdb.mi/mi-var-rtti.exp: use_rtti_for_ref_child: go to line 148
new FAIL: gdb.mi/mi-var-rtti.exp: use_rtti_for_ref_child: step over 148 (failed to resume)
new FAIL: gdb.mi/mi-var-rtti.exp: wait for stop (use_rtti_for_ref_child: step to 148)
new FAIL: gdb.multi/multi-attach.exp: attach to program 1 (timeout)
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 1
new FAIL: gdb.python/py-unwind.exp: Backtrace restored by unwinder (pattern 1) (timeout)
new FAIL: gdb.python/py-unwind.exp: continue to breakpoint: break backtrace-broken (timeout)
new FAIL: gdb.python/py-unwind.exp: import python scripts (timeout)
new FAIL: gdb.reverse/sigall-reverse.exp: advance to 37 (timeout)
PASS -> FAIL: gdb.reverse/sigall-reverse.exp: advance to HUP
new FAIL: gdb.reverse/sigall-reverse.exp: b gen_37 (timeout)
new FAIL: gdb.reverse/sigall-reverse.exp: get signal ABRT (timeout)
PASS -> FAIL: gdb.reverse/sigall-reverse.exp: send signal 36 <<2>>
PASS -> FAIL: gdb.reverse/sigall-reverse.exp: send signal ABRT
new FAIL: gdb.reverse/step-precsave.exp: reload core file (timeout)
new FAIL: gdb.reverse/until-precsave.exp: save process recfile (timeout)
PASS -> FAIL: gdb.reverse/until-reverse.exp: set reverse execution
new FAIL: gdb.reverse/until-reverse.exp: until func, not called by current frame (timeout)
new FAIL: gdb.server/wrapper.exp: continue to marker (timeout)
PASS -> FAIL: gdb.server/wrapper.exp: print d
PASS -> FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attach (pass 1), pending signal catch
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attach (pass 1), pending signal catch (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach (timeout)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
new FAIL: gdb.threads/continue-pending-status.exp: attempt 0: caught interrupt (timeout)
new FAIL: gdb.threads/continue-pending-status.exp: attempt 18: caught interrupt (timeout)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 19: set break in tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 1: caught interrupt (timeout)
new FAIL: gdb.threads/continue-pending-status.exp: attempt 1: continue to tight loop (timeout)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 1: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 2: set break in tight loop
new FAIL: gdb.threads/manythreads.exp: stop threads 1 (timeout)
new FAIL: gdb.threads/pthreads.exp: continue until common routine run 15 times (timeout)
new FAIL: gdb.threads/siginfo-threads.exp: catch signal 0 (timeout)
new FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: save ctf trace file (timeout)
new FAIL: gdb.xml/tdesc-regs.exp: set tdesc filename regs.xml - from extra-regs.xml (timeout)
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.base/attach-pie-misread.exp: shift-by-1: detach (the program is no longer running)
new FAIL: gdb.base/attach-pie-misread.exp: shift-by-2: detach (the program is no longer running)
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/attach.exp: starting with --pid (timeout)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=0: continue trips on nested permanent bp: continue to breakpoint: test_signal_nested_done (timeout)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=0: continue trips on nested permanent bp: setting breakpoint at test_signal_nested_done (timeout)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=on, sw_watchpoint=1: setup: next over setup (timeout)
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieYES: reach-(_dl_debug_state|dl_main): reach (timeout)
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieYES: reach-(_dl_debug_state|dl_main): set stop-on-solib-events 0
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
new FAIL: gdb.base/catch-gdb-caused-signals.exp: Can't run to main to make the tests
new FAIL: gdb.base/catch-load.exp: plain unload with stop-on-solib-events: can't run to main
new FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=off: detach program (timeout)
new FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=off: dprintf insertion (timeout)
PASS -> FAIL: gdb.base/gdb-sigterm.exp: 50 SIGTERM passes
new FAIL: gdb.base/reread.exp: run to foo() second time (timeout)
new FAIL: gdb.base/sigall.exp: advance to 56 (timeout)
new FAIL: gdb.base/sigall.exp: send signal 58 (timeout)
new FAIL: gdb.base/sigbpt.exp: Verify that SIGSEGV occurs at the last STEPI insn (none bowler)
new FAIL: gdb.base/sigbpt.exp: advance to the bowler (timeout)
PASS -> FAIL: gdb.base/sigbpt.exp: cont bp after segv; clear breakpoint 0 of 2
PASS -> FAIL: gdb.base/sigbpt.exp: cont bp after segv; continue to breakpoint at fault
PASS -> FAIL: gdb.base/sigbpt.exp: cont bp after segv; set breakpoint 0  of 2
PASS -> FAIL: gdb.base/sigbpt.exp: cont bp after segv; stepi fault
PASS -> FAIL: gdb.base/sigbpt.exp: cont bp before and after segv; clear breakpoint 0 of 3
PASS -> FAIL: gdb.base/sigbpt.exp: cont bp before and after segv; continue to breakpoint at fault
PASS -> FAIL: gdb.base/sigbpt.exp: cont bp before and after segv; set breakpoint 0  of 3
PASS -> FAIL: gdb.base/sigbpt.exp: cont bp before and after segv; stepi fault
PASS -> FAIL: gdb.base/sigbpt.exp: cont; continue to breakpoint at fault
PASS -> FAIL: gdb.base/sigbpt.exp: cont; stepi fault
PASS -> FAIL: gdb.base/sigbpt.exp: stepi bp before and at segv; clear breakpoint 1 of 2
PASS -> FAIL: gdb.base/sigbpt.exp: stepi bp before and at segv; set breakpoint 1 of 2
PASS -> FAIL: gdb.base/sigbpt.exp: stepi bp before segv; clear breakpoint 0 of 1
PASS -> FAIL: gdb.base/sigbpt.exp: stepi bp before segv; set breakpoint 0 of 1
new FAIL: gdb.base/sigbpt.exp: stepping to fault (timeout)
new FAIL: gdb.base/signals.exp: backtrace from handler when calling func1 (timeout)
PASS -> FAIL: gdb.base/signals.exp: continue
PASS -> FAIL: gdb.base/signals.exp: p count #1
new FAIL: gdb.base/signals.exp: p func1 () #1 (timeout)
new FAIL: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, to handler: backtrace (pattern 1)
new FAIL: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, to handler: performing continue (timeout)
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint: performing continue
new FAIL: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint: watch $convenience (timeout)
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, no handler: advanced
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, no handler: get next PC
new FAIL: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, no handler: set done (timeout)
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint: advanced
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint: get next PC
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint: performing nexti
new FAIL: gdb.base/sigstep.exp: displaced=on: nexti on breakpoint, skip handler, with sw-watchpoint: watch $convenience (timeout)
new FAIL: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, no handler: performing stepi (timeout)
new FAIL: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, no handler: set done (timeout)
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: advanced
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: get next PC
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: set done
new FAIL: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: watch $convenience (timeout)
new FAIL: gdb.base/solib-display.exp: IN: after rerun (2) (timeout)
new FAIL: gdb.base/solib-overlap.exp: 0x40000000: detach (the program is no longer running)
PASS -> FAIL: gdb.base/step-test.exp: next 2
PASS -> FAIL: gdb.base/step-test.exp: next 3
new FAIL: gdb.base/step-test.exp: step 1 (timeout)
new FAIL: gdb.base/step-test.exp: step 3 (timeout)
new FAIL: gdb.base/until.exp: info breakpoints (got interactive prompt)
new FAIL: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (sw) (timeout)
PASS -> FAIL: gdb.cp/pr17132.exp: p sizeof (a_ptr->func())
new FAIL: gdb.cp/pr17132.exp: ptype a->func () (timeout)
new FAIL: gdb.cp/re-set-overloaded.exp: start (timeout)
new FAIL: gdb.cp/try_catch.exp: continue to breakpoint: marker 1-catch (timeout)
new FAIL: gdb.gdb/observer.exp: second observer removed; reset first observer counter (timeout)
PASS -> FAIL: gdb.gdb/observer.exp: second observer removed; reset second observer counter
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
new FAIL: gdb.linespec/break-ask.exp: continue to breakpoint: body_elsewhere other (timeout)
new FAIL: gdb.linespec/break-ask.exp: expect breakpoint other (timeout)
PASS -> FAIL: gdb.linespec/break-ask.exp: info source other
new FAIL: gdb.linespec/skip-two.exp: dupname ignored for thefile.cc (timeout)
new FAIL: gdb.linespec/skip-two.exp: step into dupname (timeout)
new FAIL: gdb.mi/mi-pending.exp: Run till MI pending breakpoint on pendfunc3 on thread 2 (timeout)
new FAIL: gdb.mi/mi-reg-undefined.exp: mi runto stop_frame (timeout)
PASS -> FAIL: gdb.mi/mi-reg-undefined.exp: stack frame listing
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: run to mi-var-rtti.cc:201 (set breakpoint)
new FAIL: gdb.mi/mi-var-rtti.exp: use_rtti_for_ref_child: go to line 148
new FAIL: gdb.mi/mi-var-rtti.exp: use_rtti_for_ref_child: step over 148 (failed to resume)
new FAIL: gdb.mi/mi-var-rtti.exp: wait for stop (use_rtti_for_ref_child: step to 148)
new FAIL: gdb.multi/multi-attach.exp: attach to program 1 (timeout)
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 1
new FAIL: gdb.python/py-unwind.exp: Backtrace restored by unwinder (pattern 1) (timeout)
new FAIL: gdb.python/py-unwind.exp: continue to breakpoint: break backtrace-broken (timeout)
new FAIL: gdb.python/py-unwind.exp: import python scripts (timeout)
new FAIL: gdb.reverse/sigall-reverse.exp: advance to 37 (timeout)
PASS -> FAIL: gdb.reverse/sigall-reverse.exp: advance to HUP
new FAIL: gdb.reverse/sigall-reverse.exp: b gen_37 (timeout)
new FAIL: gdb.reverse/sigall-reverse.exp: get signal ABRT (timeout)
PASS -> FAIL: gdb.reverse/sigall-reverse.exp: send signal 36 <<2>>
PASS -> FAIL: gdb.reverse/sigall-reverse.exp: send signal ABRT
new FAIL: gdb.reverse/step-precsave.exp: reload core file (timeout)
new FAIL: gdb.reverse/until-precsave.exp: save process recfile (timeout)
PASS -> FAIL: gdb.reverse/until-reverse.exp: set reverse execution
new FAIL: gdb.reverse/until-reverse.exp: until func, not called by current frame (timeout)
new FAIL: gdb.server/wrapper.exp: continue to marker (timeout)
PASS -> FAIL: gdb.server/wrapper.exp: print d
PASS -> FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attach (pass 1), pending signal catch
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attach (pass 1), pending signal catch (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach (timeout)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
new FAIL: gdb.threads/continue-pending-status.exp: attempt 0: caught interrupt (timeout)
new FAIL: gdb.threads/continue-pending-status.exp: attempt 18: caught interrupt (timeout)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 19: set break in tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 1: caught interrupt (timeout)
new FAIL: gdb.threads/continue-pending-status.exp: attempt 1: continue to tight loop (timeout)
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 1: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 2: set break in tight loop
new FAIL: gdb.threads/manythreads.exp: stop threads 1 (timeout)
new FAIL: gdb.threads/pthreads.exp: continue until common routine run 15 times (timeout)
new FAIL: gdb.threads/siginfo-threads.exp: catch signal 0 (timeout)
new FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: save ctf trace file (timeout)
new FAIL: gdb.xml/tdesc-regs.exp: set tdesc filename regs.xml - from extra-regs.xml (timeout)
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
FAIL: gdb.dwarf2/gdb-index.exp: touch binary
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call============================
References:
- [binutils-gdb] gdb: Add internationalization support to a few strings.
  - From: sergiodj+buildbot
Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]