This is the mail archive of the gdb-testers@sourceware.org mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Failures on Debian-x86_64-native-extended-gdbserver-m64, branch master


Buildslave:
	wildebeest-debian-wheezy-x86_64

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-x86_64-native-extended-gdbserver-m64/builds/565>

Commit(s) tested:
	3333f03ae1b02b321717b4bc4887201ed4fc6a26

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-x86_64-native-extended-gdbserver-m64/.git/tree/?h=master&id=ebb7509c9d972f6cc79198f7dc7d660c63c00999>

*** Regressions found ***
============================
new FAIL: gdb.base/attach-pie-misread.exp: shift-by-1: detach (the program is no longer running)
new FAIL: gdb.base/attach-pie-misread.exp: shift-by-2: detach (the program is no longer running)
new FAIL: gdb.base/attach.exp: force switch to gdb64, if necessary (timeout)
PASS -> FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: basics: breakpoint commands ran
PASS -> FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: basics: disabled permanent breakpoint doesn't explain stop
PASS -> FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: basics: info breakpoints shows one more hit
PASS -> FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: basics: permanent breakpoint causes random signal
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: basics: reenable breakpoint (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: basics: single-step past permanent breakpoint (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: basics: stop at permanent breakpoint thrice (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: continue trips on nested permanent bp: condition $bpnum 0 (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: continue trips on nested permanent bp: continue to breakpoint: permanent bp (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: continue trips on nested permanent bp: continue to breakpoint: test_signal_nested (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: continue trips on nested permanent bp: continue to breakpoint: test_signal_nested_done (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: continue trips on nested permanent bp: delete all breakpoints in delete_breakpoints (GDB internal error)
PASS -> FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: continue trips on nested permanent bp: p counter
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: continue trips on nested permanent bp: setting breakpoint at 46 (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: continue trips on nested permanent bp: setting breakpoint at test_signal_nested_done (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: next trips on permanent bp: condition $bpnum 0 (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: next trips on permanent bp: continue to breakpoint: test_next (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: next trips on permanent bp: delete all breakpoints in delete_breakpoints (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: next trips on permanent bp: next (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: next trips on permanent bp: setting breakpoint at 46 (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: setup: info breakpoints (got interactive prompt)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: setup: next over setup (timeout)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with handler: continue to breakpoint: test_signal_with_handler (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with handler: delete all breakpoints in delete_breakpoints (GDB internal error)
PASS -> FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with handler: mainline pc points at permanent breakpoint
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with handler: setting breakpoint at 46 (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with handler: single-step to handler (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with handler: stop at permanent breakpoint (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with handler: stop at permanent breakpoint, out of handler (GDB internal error)
PASS -> FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with handler: up to mainline code
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with no handler: continue to breakpoint: test_signal_no_handler (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with no handler: setting breakpoint at test_signal_no_handler (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with no handler: single-step past permanent breakpoint (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with no handler: stop at permanent breakpoint (GDB internal error)
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieYES: dl bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieYES: main bt
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieYES: reach-(_dl_debug_state|dl_main): reach (timeout)
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieYES: reach-(_dl_debug_state|dl_main): set stop-on-solib-events 0
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieYES: reach-libfunc: reach
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieYES: reach-main: setting breakpoint at main
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
new FAIL: gdb.base/break-main-file-remove-fail.exp: cmdline: Can't run to start
new FAIL: gdb.base/shlib-call.exp: run to bp in shared library (timeout)
PASS -> FAIL: gdb.base/sigstep.exp: continue on breakpoint, skip handler, no handler: performing continue
new FAIL: gdb.base/sigstep.exp: continue on breakpoint, skip handler, no handler: set done (timeout)
new FAIL: gdb.base/sigstep.exp: continue over handler: performing continue (timeout)
new FAIL: gdb.base/structs.exp: p chartest (timeout)
new FAIL: gdb.dwarf2/dw2-dir-file-name.exp: compdir_relative_ldir_relative_file_basename: continue to breakpoint: compdir_relative_ldir_relative_file_basename (timeout)
PASS -> FAIL: gdb.dwarf2/dw2-dir-file-name.exp: compdir_relative_ldir_relative_file_basename: set filename-display absolute
new FAIL: gdb.reverse/break-precsave.exp: Kill process, prepare to debug log file (timeout)
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: bar (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: bar (the program is no longer running) <<2>>
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: bar backward (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: foo (got interactive prompt)
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: foo (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: foo backward (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: end of record log (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: go to end of main forward (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: main backward (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: reload precord save file (timeout)
new FAIL: gdb.reverse/break-precsave.exp: save process recfile (timeout)
new FAIL: gdb.reverse/break-precsave.exp: set breakpoint on bar (got interactive prompt)
PASS -> FAIL: gdb.reverse/break-precsave.exp: set breakpoint on foo
PASS -> FAIL: gdb.reverse/break-precsave.exp: set forward
PASS -> FAIL: gdb.reverse/break-precsave.exp: set reverse
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (timeout)
new FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: tsave unavailable.locals.tfile (timeout)
PASS -> FAIL: gdb.xml/tdesc-xinclude.exp: set tdesc filename gdb.xml/bad-include.xml
new FAIL: gdb.xml/tdesc-xinclude.exp: set tdesc filename gdb.xml/includes.xml (timeout)
PASS -> FAIL: gdb.xml/tdesc-xinclude.exp: set tdesc filename gdb.xml/loop.xml
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.base/attach-pie-misread.exp: shift-by-1: detach (the program is no longer running)
new FAIL: gdb.base/attach-pie-misread.exp: shift-by-2: detach (the program is no longer running)
new FAIL: gdb.base/attach.exp: force switch to gdb64, if necessary (timeout)
PASS -> FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: basics: breakpoint commands ran
PASS -> FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: basics: disabled permanent breakpoint doesn't explain stop
PASS -> FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: basics: info breakpoints shows one more hit
PASS -> FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: basics: permanent breakpoint causes random signal
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: basics: reenable breakpoint (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: basics: single-step past permanent breakpoint (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: basics: stop at permanent breakpoint thrice (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: continue trips on nested permanent bp: condition $bpnum 0 (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: continue trips on nested permanent bp: continue to breakpoint: permanent bp (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: continue trips on nested permanent bp: continue to breakpoint: test_signal_nested (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: continue trips on nested permanent bp: continue to breakpoint: test_signal_nested_done (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: continue trips on nested permanent bp: delete all breakpoints in delete_breakpoints (GDB internal error)
PASS -> FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: continue trips on nested permanent bp: p counter
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: continue trips on nested permanent bp: setting breakpoint at 46 (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: continue trips on nested permanent bp: setting breakpoint at test_signal_nested_done (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: next trips on permanent bp: condition $bpnum 0 (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: next trips on permanent bp: continue to breakpoint: test_next (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: next trips on permanent bp: delete all breakpoints in delete_breakpoints (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: next trips on permanent bp: next (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: next trips on permanent bp: setting breakpoint at 46 (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: setup: info breakpoints (got interactive prompt)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: setup: next over setup (timeout)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with handler: continue to breakpoint: test_signal_with_handler (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with handler: delete all breakpoints in delete_breakpoints (GDB internal error)
PASS -> FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with handler: mainline pc points at permanent breakpoint
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with handler: setting breakpoint at 46 (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with handler: single-step to handler (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with handler: stop at permanent breakpoint (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with handler: stop at permanent breakpoint, out of handler (GDB internal error)
PASS -> FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with handler: up to mainline code
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with no handler: continue to breakpoint: test_signal_no_handler (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with no handler: setting breakpoint at test_signal_no_handler (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with no handler: single-step past permanent breakpoint (GDB internal error)
new FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=1: stepi signal with no handler: stop at permanent breakpoint (GDB internal error)
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieYES: dl bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieYES: main bt
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieYES: reach-(_dl_debug_state|dl_main): reach (timeout)
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieYES: reach-(_dl_debug_state|dl_main): set stop-on-solib-events 0
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieYES: reach-libfunc: reach
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieYES: reach-main: setting breakpoint at main
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
new FAIL: gdb.base/break-main-file-remove-fail.exp: cmdline: Can't run to start
new FAIL: gdb.base/shlib-call.exp: run to bp in shared library (timeout)
PASS -> FAIL: gdb.base/sigstep.exp: continue on breakpoint, skip handler, no handler: performing continue
new FAIL: gdb.base/sigstep.exp: continue on breakpoint, skip handler, no handler: set done (timeout)
new FAIL: gdb.base/sigstep.exp: continue over handler: performing continue (timeout)
new FAIL: gdb.base/structs.exp: p chartest (timeout)
new FAIL: gdb.dwarf2/dw2-dir-file-name.exp: compdir_relative_ldir_relative_file_basename: continue to breakpoint: compdir_relative_ldir_relative_file_basename (timeout)
PASS -> FAIL: gdb.dwarf2/dw2-dir-file-name.exp: compdir_relative_ldir_relative_file_basename: set filename-display absolute
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
new FAIL: gdb.reverse/break-precsave.exp: Kill process, prepare to debug log file (timeout)
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: bar (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: bar (the program is no longer running) <<2>>
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: bar backward (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: foo (got interactive prompt)
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: foo (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: continue to breakpoint: foo backward (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: end of record log (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: go to end of main forward (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: main backward (the program is no longer running)
new FAIL: gdb.reverse/break-precsave.exp: reload precord save file (timeout)
new FAIL: gdb.reverse/break-precsave.exp: save process recfile (timeout)
new FAIL: gdb.reverse/break-precsave.exp: set breakpoint on bar (got interactive prompt)
PASS -> FAIL: gdb.reverse/break-precsave.exp: set breakpoint on foo
PASS -> FAIL: gdb.reverse/break-precsave.exp: set forward
PASS -> FAIL: gdb.reverse/break-precsave.exp: set reverse
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/pthreads.exp: continue until common routine run 15 times (timeout)
new FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: tsave unavailable.locals.tfile (timeout)
PASS -> FAIL: gdb.xml/tdesc-xinclude.exp: set tdesc filename gdb.xml/bad-include.xml
new FAIL: gdb.xml/tdesc-xinclude.exp: set tdesc filename gdb.xml/includes.xml (timeout)
PASS -> FAIL: gdb.xml/tdesc-xinclude.exp: set tdesc filename gdb.xml/loop.xml
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
FAIL: gdb.dwarf2/gdb-index.exp: touch binary
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call============================




Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]