This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
[PATCH] gdb.trace: Move more target dependencies to trace-support.exp
- From: Marcin KoÅcielnicki <koriakin at 0x04 dot net>
- To: gdb-patches at sourceware dot org
- Cc: antoine dot tremblay at ericsson dot com, Marcin KoÅcielnicki <koriakin at 0x04 dot net>
- Date: Fri, 19 Feb 2016 13:23:49 +0100
- Subject: [PATCH] gdb.trace: Move more target dependencies to trace-support.exp
- Authentication-results: sourceware.org; auth=none
While groveling through the old PPC64 tracepoint support patch, I've
noticed a few target dependencies in the testsuite that both me and
Antoine missed for s390 and ARM tracepoints, respectively. This patch
moves them all to one place, so that anyone working on a new target
will hopefully see the whole set of needed changes.
I've also removed a check for fast tracepoint support in ftrace.exp -
it used hardcoded targets and wasn't doing anything useful anyway,
since unsupported architectures blow up on link due to missing
the IPA library before they ever get to that check.
For some strange reason, the call_insn setting code already knew about
arm, powerpc, s390, and mips - I went ahead and added the remaining
information about those. I'm not particularly sure if I got mips right,
but that won't matter anyway until someone actually writes tracepoint
support for that.
In addition, the PPC64 tracepoint patch added \y at the end of the call_insn
pattern - without that, it embarassed itself and matched the 'bl' in
"Dump of assem*bl*er code for function" as the powerpc call opcode. Since
that sounds like a generally good idea, I've added \y before and after
call_insn for every target. As a result, I had to change x86_64's mnemonic
to 'callq'.
Tested on x86_64, i386, ppc, ppc64, ppc64le, s390, s390x. Would be good
to test it on aarch64.
gdb/testsuite/ChangeLog:
* gdb.trace/entry-values.exp: Move call_insn setting to
trace-support.exp, surround $call_insn with \y.
* gdb.trace/ftrace.exp (test_fast_tracepoints): Don't bother
checking for a target that supports tracepoints (compile would
blow up first).
(toplevel): Move arg0exp setting to trace-support.exp.
* gdb.trace/mi-trace-unavailable.exp (proc_trace_unavailable): Move
pcnum setting to trace-support.exp, change fixed register 0 to
gpr0num variable.
* lib/trace-support.exp: Add setting pcnum, gpr0num, arg0exp,
call_insn; add powerpc, s390, and mips support.
---
gdb/testsuite/ChangeLog | 14 +++
gdb/testsuite/gdb.trace/entry-values.exp | 28 +----
gdb/testsuite/gdb.trace/ftrace.exp | 148 +++++++++++------------
gdb/testsuite/gdb.trace/mi-trace-unavailable.exp | 25 ++--
gdb/testsuite/lib/trace-support.exp | 77 +++++++++++-
5 files changed, 167 insertions(+), 125 deletions(-)
diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
index 5676cac..8675ef4 100644
--- a/gdb/testsuite/ChangeLog
+++ b/gdb/testsuite/ChangeLog
@@ -1,3 +1,17 @@
+2017-02-19 Marcin KoÅcielnicki <koriakin@0x04.net>
+
+ * gdb.trace/entry-values.exp: Move call_insn setting to
+ trace-support.exp, surround $call_insn with \y.
+ * gdb.trace/ftrace.exp (test_fast_tracepoints): Don't bother
+ checking for a target that supports tracepoints (compile would
+ blow up first).
+ (toplevel): Move arg0exp setting to trace-support.exp.
+ * gdb.trace/mi-trace-unavailable.exp (proc_trace_unavailable): Move
+ pcnum setting to trace-support.exp, change fixed register 0 to
+ gpr0num variable.
+ * lib/trace-support.exp: Add setting pcnum, gpr0num, arg0exp,
+ call_insn; add powerpc, s390, and mips support.
+
2016-02-18 Iain Buclaw <ibuclaw@gdcproject.org>
* lib/future.exp: Add D support.
diff --git a/gdb/testsuite/gdb.trace/entry-values.exp b/gdb/testsuite/gdb.trace/entry-values.exp
index 825928d..2890112 100644
--- a/gdb/testsuite/gdb.trace/entry-values.exp
+++ b/gdb/testsuite/gdb.trace/entry-values.exp
@@ -12,6 +12,8 @@
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+load_lib "trace-support.exp"
load_lib dwarf.exp
# This test can only be run on targets which support DWARF-2 and use gas.
@@ -37,34 +39,10 @@ gdb_load ${binfile}1.o
set returned_from_foo ""
-if { [istarget "arm*-*-*"] || [istarget "aarch64*-*-*"] } {
- set call_insn "bl"
-} elseif { [istarget "s390*-*-*"] } {
- set call_insn "brasl"
-} elseif { [istarget "powerpc*-*-*"] } {
- set call_insn "bl"
-} elseif { [istarget "mips*-*-*"] } {
- # Skip the delay slot after the instruction used to make a call
- # (which can be a jump or a branch) if it has one.
- #
- # JUMP (or BRANCH) foo
- # insn1
- # insn2
- #
- # Most MIPS instructions used to make calls have a delay slot.
- # These include JAL, JALS, JALX, JALR, JALRS, BAL and BALS.
- # In this case the program continues from `insn2' when `foo'
- # returns. The only exception is JALRC, in which case execution
- # resumes from `insn1' instead.
- set call_insn {jalrc|[jb]al[sxr]*[ \t][^\r\n]+\r\n}
-} else {
- set call_insn "call"
-}
-
# Calculate the offset of the instruction in bar returned from foo.
set test "disassemble bar"
gdb_test_multiple $test $test {
- -re ".*$hex <\\+$decimal>:\[ \t\]+$call_insn\[^\r\n\]+\r\n\[ \]+$hex <\\+($decimal)>:.*$gdb_prompt $" {
+ -re ".*$hex <\\+$decimal>:\[ \t\]+\\y$call_insn\\y\[^\r\n\]+\r\n\[ \]+$hex <\\+($decimal)>:.*$gdb_prompt $" {
set returned_from_foo $expect_out(1,string)
}
-re ".*$gdb_prompt $" {
diff --git a/gdb/testsuite/gdb.trace/ftrace.exp b/gdb/testsuite/gdb.trace/ftrace.exp
index 15ad7e7..f4448eb 100644
--- a/gdb/testsuite/gdb.trace/ftrace.exp
+++ b/gdb/testsuite/gdb.trace/ftrace.exp
@@ -84,97 +84,96 @@ proc test_fast_tracepoints {} {
gdb_test "print gdb_agent_gdb_trampoline_buffer_error" ".*" ""
- if { [istarget "x86_64-*-*"] || [istarget "i\[34567\]86-*-*"] || [is_aarch64_target] } {
+ gdb_test "ftrace set_point" "Fast tracepoint .*" \
+ "fast tracepoint at a long insn"
- gdb_test "ftrace set_point" "Fast tracepoint .*" \
- "fast tracepoint at a long insn"
+ gdb_trace_setactions "collect at set_point: define actions" \
+ "" \
+ "collect globvar, anarg" "^$"
- gdb_trace_setactions "collect at set_point: define actions" \
- "" \
- "collect globvar, anarg" "^$"
+ # Make a test of shorter fast tracepoints, 32-bit x86 only
- # Make a test of shorter fast tracepoints, 32-bit x86 only
+ if { [istarget "i?86-*-*"] } {
- if { [istarget "i?86-*-*"] } {
+ # A Linux target needs to be able to allocate trampolines in the
+ # 16-bit range, check mmap_min_addr so we can warn testers.
+ if { [istarget "i?86-*-linux*"] } {
- # A Linux target needs to be able to allocate trampolines in the
- # 16-bit range, check mmap_min_addr so we can warn testers.
- if { [istarget "i?86-*-linux*"] } {
+ set minaddr [exec sh -c "cat /proc/sys/vm/mmap_min_addr"]
- set minaddr [exec sh -c "cat /proc/sys/vm/mmap_min_addr"]
+ if { [expr $minaddr > 64512] } {
+ warning "mmap_min_addr > 64512, fast tracepoint will fail"
+ warning "do \"sudo sysctl -w vm.mmap_min_addr=32768\" to adjust"
+ }
+ }
- if { [expr $minaddr > 64512] } {
- warning "mmap_min_addr > 64512, fast tracepoint will fail"
- warning "do \"sudo sysctl -w vm.mmap_min_addr=32768\" to adjust"
- }
- }
+ gdb_test_multiple "ftrace four_byter" "set 4-byte fast tracepoint" {
+ -re "May not have a fast tracepoint at .*\r\n$gdb_prompt $" {
+ pass "4-byte fast tracepoint could not be set"
+ }
+ -re "Fast tracepoint .*\r\n$gdb_prompt $" {
+ pass "4-byte fast tracepoint is set"
+ set fourgood 1
+ }
+ }
- gdb_test_multiple "ftrace four_byter" "set 4-byte fast tracepoint" {
- -re "May not have a fast tracepoint at .*\r\n$gdb_prompt $" {
- pass "4-byte fast tracepoint could not be set"
- }
- -re "Fast tracepoint .*\r\n$gdb_prompt $" {
- pass "4-byte fast tracepoint is set"
- set fourgood 1
- }
- }
+ if { $fourgood } {
- if { $fourgood } {
-
- gdb_trace_setactions "collect at four_byter: define actions" \
- "" \
- "collect globvar, anarg" "^$"
- }
- }
-
- run_trace_experiment
+ gdb_trace_setactions "collect at four_byter: define actions" \
+ "" \
+ "collect globvar, anarg" "^$"
+ }
+ }
- gdb_test "tfind pc *set_point" "Found trace frame .*" \
- "tfind set_point frame, first time"
+ run_trace_experiment
- setup_kfail "gdb/13808" "x86_64-*-linux*"
- gdb_test "print globvar" " = 1"
+ gdb_test "tfind pc *set_point" "Found trace frame .*" \
+ "tfind set_point frame, first time"
- gdb_test "tfind pc *set_point" "Found trace frame .*" \
- "tfind set_point frame, second time"
+ setup_kfail "gdb/13808" "x86_64-*-linux*"
+ setup_kfail "gdb/13808" "s390*-*-linux*"
+ gdb_test "print globvar" " = 1"
- setup_kfail "gdb/13808" "x86_64-*-linux*"
- gdb_test "print anarg" " = 200"
+ gdb_test "tfind pc *set_point" "Found trace frame .*" \
+ "tfind set_point frame, second time"
- gdb_test "tfind start" "Found trace frame .*" \
- "reset tfinding"
+ setup_kfail "gdb/13808" "x86_64-*-linux*"
+ setup_kfail "gdb/13808" "s390*-*-linux*"
+ gdb_test "print anarg" " = 200"
- if { $fourgood } {
+ gdb_test "tfind start" "Found trace frame .*" \
+ "reset tfinding"
- gdb_test "tfind pc *four_byter" "Found trace frame .*" \
- "tfind four_byter frame, first time"
+ if { $fourgood } {
- gdb_test "print anarg" " = 101" \
- "look at collected local, first time"
+ gdb_test "tfind pc *four_byter" "Found trace frame .*" \
+ "tfind four_byter frame, first time"
- gdb_test "tfind pc *four_byter" "Found trace frame .*" \
- "tfind four_byter frame, second time"
+ gdb_test "print anarg" " = 101" \
+ "look at collected local, first time"
- gdb_test "print anarg" " = 201" \
- "look at collected local, second time"
+ gdb_test "tfind pc *four_byter" "Found trace frame .*" \
+ "tfind four_byter frame, second time"
- }
+ gdb_test "print anarg" " = 201" \
+ "look at collected local, second time"
- # If debugging with the remote target, try force disabling the
- # fast tracepoints RSP feature, and confirm fast tracepoints
- # can no longer be downloaded.
- set test "fast tracepoint could not be downloaded with the feature disabled"
- if [gdb_is_target_remote] {
- gdb_test "set remote fast-tracepoints-packet off"
+ }
- gdb_test_multiple "tstart" $test {
- -re "warning: Target does not support fast tracepoints, downloading .* as regular tracepoint.*\r\n$gdb_prompt $" {
- pass $test
- }
- }
- } else {
- unsupported $test
- }
+ # If debugging with the remote target, try force disabling the
+ # fast tracepoints RSP feature, and confirm fast tracepoints
+ # can no longer be downloaded.
+ set test "fast tracepoint could not be downloaded with the feature disabled"
+ if [gdb_is_target_remote] {
+ gdb_test "set remote fast-tracepoints-packet off"
+
+ gdb_test_multiple "tstart" $test {
+ -re "warning: Target does not support fast tracepoints, downloading .* as regular tracepoint.*\r\n$gdb_prompt $" {
+ pass $test
+ }
+ }
+ } else {
+ unsupported $test
}
}
@@ -239,17 +238,6 @@ test_ftrace_condition "(globvar >> 2) == 2" "globvar" { 8 9 10 }
# Test emit_call by accessing trace state variables.
test_ftrace_condition "(\$tsv = \$tsv + 2) > 10" "globvar" { 6 7 8 9 10 }
-# This expression is used for testing emit_reg.
-if [is_amd64_regs_target] {
- set arg0exp "\$rdi"
-} elseif [is_x86_like_target] {
- set arg0exp "*(int *) (\$ebp + 8)"
-} elseif { [istarget "aarch64*-*-*"] } {
- set arg0exp "\$x0"
-} else {
- set arg0exp ""
-}
-
if { "$arg0exp" != "" } {
test_ftrace_condition "($arg0exp > 500)" "globvar" { 6 7 8 9 10 }
}
diff --git a/gdb/testsuite/gdb.trace/mi-trace-unavailable.exp b/gdb/testsuite/gdb.trace/mi-trace-unavailable.exp
index 82c6101..a39b82e 100644
--- a/gdb/testsuite/gdb.trace/mi-trace-unavailable.exp
+++ b/gdb/testsuite/gdb.trace/mi-trace-unavailable.exp
@@ -77,6 +77,8 @@ mi_gdb_test "-trace-save -ctf ${tracefile}.ctf" ".*\\^done" \
proc test_trace_unavailable { data_source } {
global decimal
+ global pcnum
+ global gpr0num
with_test_prefix "$data_source" {
@@ -130,28 +132,15 @@ proc test_trace_unavailable { data_source } {
".*\\^done,found=\"1\",tracepoint=\"${decimal}\",traceframe=\"1\",frame=\{.*" \
"-trace-find frame-number 1"
- set pcnum 0
- if [is_amd64_regs_target] {
- set pcnum 16
- } elseif [is_x86_like_target] {
- set pcnum 8
- } elseif [is_aarch64_target] {
- set pcnum 32
- } else {
- # Other ports support tracepoint should define the number
- # of its own pc register.
- }
-
- if { $pcnum != 0 } {
+ if { $pcnum != -1 } {
global hex
- # Test that register 0 and PC are displayed, and register
- # 0 is unavailable.
- mi_gdb_test "-data-list-register-values x 0 ${pcnum}" \
- ".*\\^done,register-values=\\\[\{number=\"0\",value=\"<unavailable>\"\},\{number=\"${pcnum}\",value=\"${hex}\"\}\\\]" \
+ # Test that GPR0 and PC are displayed, and GPR0 is unavailable.
+ mi_gdb_test "-data-list-register-values x ${gpr0num} ${pcnum}" \
+ ".*\\^done,register-values=\\\[\{number=\"${gpr0num}\",value=\"<unavailable>\"\},\{number=\"${pcnum}\",value=\"${hex}\"\}\\\]" \
"-data-list-register-values x"
# Test that only available register PC is displayed.
- mi_gdb_test "-data-list-register-values --skip-unavailable x 0 ${pcnum}" \
+ mi_gdb_test "-data-list-register-values --skip-unavailable x ${gpr0num} ${pcnum}" \
".*\\^done,register-values=\\\[\{number=\"${pcnum}\",value=\"${hex}\"\}\\\]" \
"-data-list-register-values --skip-unavailable x"
}
diff --git a/gdb/testsuite/lib/trace-support.exp b/gdb/testsuite/lib/trace-support.exp
index f593c43..829786b 100644
--- a/gdb/testsuite/lib/trace-support.exp
+++ b/gdb/testsuite/lib/trace-support.exp
@@ -20,26 +20,99 @@
#
-# Program counter / stack pointer / frame pointer for supported targets.
-# Used in many tests, kept here to avoid duplication.
+# Target-specific information. Used in many tests, kept here
+# to avoid duplication and make it easier to add a new target.
#
if [is_amd64_regs_target] {
+ # Frame pointer.
set fpreg "rbp"
+ # Stack pointer.
set spreg "rsp"
+ # Program counter.
set pcreg "rip"
+ # How to collect the first argument to a function. Used to test
+ # register usage in tracepoint conditions.
+ set arg0exp "\$rdi"
+ # The mnemonic of the usual, unconditional call instruction.
+ set call_insn "callq"
+ # Number of the PC register.
+ set pcnum 16
+ # Number of any GPR (it's supposed not to be some register that's not
+ # collected by default).
+ set gpr0num 0
} elseif [is_x86_like_target] {
set fpreg "ebp"
set spreg "esp"
set pcreg "eip"
+ set arg0exp "*(int *) (\$ebp + 8)"
+ set call_insn "call"
+ set pcnum 8
+ set gpr0num 0
} elseif [is_aarch64_target] {
set fpreg "x29"
set spreg "sp"
set pcreg "pc"
+ set arg0exp "\$x0"
+ set call_insn "bl"
+ set pcnum 32
+ set gpr0num 0
+} elseif [istarget "arm*-*-*"] {
+ set fpreg "r11"
+ set spreg "r13"
+ set pcreg "r15"
+ set arg0exp "\$r0"
+ set call_insn "bl"
+ set pcnum 15
+ set gpr0num 0
+} elseif [istarget "powerpc*-*-*"] {
+ set fpreg "r31"
+ set spreg "r1"
+ set pcreg "pc"
+ set arg0exp "\$r3"
+ set call_insn "bl"
+ set pcnum 64
+ set gpr0num 0
+} elseif [istarget "s390*-*-*"] {
+ set fpreg "r11"
+ set spreg "r15"
+ set pcreg "pc"
+ set arg0exp "\$r2"
+ set call_insn "brasl"
+ # Strictly speaking, this is PSWA, not PC.
+ set pcnum 1
+ set gpr0num 2
+} elseif { [istarget "mips*-*-*"] } {
+ set fpreg "s8"
+ set spreg "sp"
+ set pcreg "pc"
+ set arg0exp "\$a0"
+ # Skip the delay slot after the instruction used to make a call
+ # (which can be a jump or a branch) if it has one.
+ #
+ # JUMP (or BRANCH) foo
+ # insn1
+ # insn2
+ #
+ # Most MIPS instructions used to make calls have a delay slot.
+ # These include JAL, JALS, JALX, JALR, JALRS, BAL and BALS.
+ # In this case the program continues from `insn2' when `foo'
+ # returns. The only exception is JALRC, in which case execution
+ # resumes from `insn1' instead.
+ set call_insn {jalrc|[jb]al[sxr]*[ \t][^\r\n]+\r\n}
+ set pcnum 37
+ set gpr0num 0
} else {
+ # Defaults. Probably won't work, but we don't want to error out
+ # here on unsupported platforms, since this file is imported to check
+ # for supported platforms in the first place.
set fpreg "fp"
set spreg "sp"
set pcreg "pc"
+ set arg0exp "\$a0"
+ set call_insn "call"
+ set pcnum -1
+ set gpr0num -1
}
#
--
2.7.1