This is the mail archive of the gdb-patches@sourceware.org mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[pushed] gdb.base/gdb-sigterm.exp: Fix spurious FAILs


The buildbot shows that some machines FAIL this test frequently.
E.g.: https://sourceware.org/ml/gdb-testers/2015-q1/msg00997.html

If I stress my machine, I can sometimes see it fail too.

Bumping the 200 limit and tweaking the test to show the step count, I
get:

     ...
     PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 12 times
     PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 8 times
     PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 13 times
     PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 7 times
-->  FAIL: gdb.base/gdb-sigterm.exp: SIGTERM stepped 228 times <--
     PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 11 times
     PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 13 times
     PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 12 times
     PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 8 times
     PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 9 times
     PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 7 times
     PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 11 times
     PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 8 times
     ...

Thinking that this might be a problem of SIGTERM reaching GDB, but
then the event loop taking too long to handle it, I hacked GDB to
print a debug log whenever the SIGTERM handler was called, and,
whenever the event loop finally calls the async SIGTERM handler.
Here's what I see:

     infrun:   30011 [Thread 30011],
     infrun:   status->kind = stopped, signal = GDB_SIGNAL_TRAP
     infrun: TARGET_WAITKIND_STOPPED
     infrun: stop_pc = 0x4005de
-->  infrun: got SIGTERM                                       <--
     infrun: stepping inside range [0x4005de-0x4005e0]
     infrun: resume (step=1, signal=GDB_SIGNAL_0), ...
     infrun: prepare_to_wait
-->  infrun: handling async SIGTERM                            <--
     Cannot execute this command while the target is running.
     Use the "interrupt" command to stop the target
     and then try again.
     gdb.base/gdb-sigterm.exp: expect eof #27
     FAIL: gdb.base/gdb-sigterm.exp: SIGTERM stepped 228 times

So, no delay on the GDB side.  It just happens that occasionally it
takes more than 200 single-steps before SIGTERM even reaches GDB.
This just looks like a kernel/scheduling issue --- some extra usage
spike in the system (e.g., an I/O spike) might cause it for me.  For
the build slaves, I'm guessing they're frequently busy enough to trip
on this often.  Particularly more so now that we're having them run
tests in parallel mode.

The fix is to detect failure by timeout instead of counting single
steps.  This should be more reliable.  Indeed for me, after this
commit, I couldn't trigger a FAIL anymore, even after letting the test
run for an hour.

By timeout is also nicer in that a board file for a slow host/target
can increase it (like, e.g., an embedded GNU/Linux board).

Tested on x86_64 Fedora 20, native, gdbserver, and extended-remote
gdbserver.

gdb/testsuite/
2015-02-06  Pedro Alves  <palves@redhat.com>

	* gdb.base/gdb-sigterm.c (main): Use the TIMEOUT define to
	determine how many seconds to pass to 'alarm'.
	* gdb.base/gdb-sigterm.exp (top level): Build program with
	-DTIMEOUT=$timeout.
	(do_test): Return success/failure indication.  Add more verbose
	logging.  Don't fail if 200 single steps are seen.  Instead, fail
	when the test times out.
	(passes): New global.
	(top level): Break the testing loop if testing fails on any
	iteration.  Use gdb_assert.
---
 gdb/testsuite/ChangeLog                | 13 ++++++++++++
 gdb/testsuite/gdb.base/gdb-sigterm.c   |  6 +++++-
 gdb/testsuite/gdb.base/gdb-sigterm.exp | 39 +++++++++++++++++++++-------------
 3 files changed, 42 insertions(+), 16 deletions(-)

diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
index 6fdaa89..5648511 100644
--- a/gdb/testsuite/ChangeLog
+++ b/gdb/testsuite/ChangeLog
@@ -1,3 +1,16 @@
+2015-02-06  Pedro Alves  <palves@redhat.com>
+
+	* gdb.base/gdb-sigterm.c (main): Use the TIMEOUT define to
+	determine how many seconds to pass to 'alarm'.
+	* gdb.base/gdb-sigterm.exp (top level): Build program with
+	-DTIMEOUT=$timeout.
+	(do_test): Return success/failure indication.  Add more verbose
+	logging.  Don't fail if 200 single steps are seen.  Instead, fail
+	when the test times out.
+	(passes): New global.
+	(top level): Break the testing loop if testing fails on any
+	iteration.  Use gdb_assert.
+
 2015-02-04  Don Breazeal  <donb@codesourcery.com>
 
 	* gdb.base/info-os.c (shmid, semid, msqid): Make variables static
diff --git a/gdb/testsuite/gdb.base/gdb-sigterm.c b/gdb/testsuite/gdb.base/gdb-sigterm.c
index ed31280..0bc8c1c 100644
--- a/gdb/testsuite/gdb.base/gdb-sigterm.c
+++ b/gdb/testsuite/gdb.base/gdb-sigterm.c
@@ -20,7 +20,11 @@
 int
 main (void)
 {
-  alarm (60);
+  /* Allow for as much timeout as DejaGnu wants, plus a bit of
+     slack.  */
+  unsigned int seconds = TIMEOUT + 20;
+
+  alarm (seconds);
 
   for (;;); /* loop-line */
 }
diff --git a/gdb/testsuite/gdb.base/gdb-sigterm.exp b/gdb/testsuite/gdb.base/gdb-sigterm.exp
index 12eaf24..95d7ec3 100644
--- a/gdb/testsuite/gdb.base/gdb-sigterm.exp
+++ b/gdb/testsuite/gdb.base/gdb-sigterm.exp
@@ -17,10 +17,16 @@
 
 standard_testfile
 
-if { [build_executable ${testfile}.exp ${testfile}] == -1 } {
+# The test program exits after a while, in case GDB crashes.  Make it
+# wait at least as long as we may wait before declaring a time out
+# failure.
+set options { "additional_flags=-DTIMEOUT=$timeout" debug }
+if { [build_executable ${testfile}.exp ${testfile} $srcfile $options] == -1 } {
     return -1
 }
 
+# Return 0 on success, non-zero otherwise.
+
 proc do_test { pass } {
     global testfile gdb_prompt binfile pf_prefix
 
@@ -42,12 +48,13 @@ proc do_test { pass } {
     gdb_test_multiple "step" $test {
 	-re "infrun: stepping inside range" {
 	    # Suppress pass $test
-	    verbose -log "$pf_prefix $test"
+	    verbose -log "$pf_prefix $test: ran"
 	    set abort 0
 	}
     }
     if $abort {
-	return
+	verbose -log "$pf_prefix $test: did not run"
+	return $abort
     }
 
     set gdb_pid [exp_pid -i [board_info host fileid]]
@@ -56,30 +63,32 @@ proc do_test { pass } {
     set test "expect eof #$pass"
     set abort 1
     set stepping 0
+    # If GDB mishandles the SIGTERM and doesn't exit, this should FAIL
+    # with timeout.  We don't expect a GDB prompt, so we see one,
+    # we'll FAIL too.
     gdb_test_multiple "" $test {
 	eof {
-	    verbose -log "$pf_prefix $test"
+	    verbose -log "$pf_prefix $test: got eof"
 	    set abort 0
 	}
 	-re "infrun: stepping inside range" {
 	    incr stepping
-	    if { $stepping > 200 } {
-		fail "$test (stepping inside range $stepping times)"
-	    } else {
-		exp_continue
-	    }
+	    exp_continue
 	}
     }
-    if $abort {
-	return
-    }
+    verbose -log "$pf_prefix $test: stepped $stepping times"
+    return $abort
 }
 
 # Testcase was FAILing approx. on 10th pass with unpatched GDB.
 # 50 runs should be approx. a safe number to be sure it is fixed now.
+set passes 50
 
-for {set pass 0} {$pass < 50} {incr pass} {
+for {set pass 0} {$pass < $passes} {incr pass} {
     clean_restart ${testfile}
-    do_test $pass
+    if { [do_test $pass] != 0 } {
+	break
+    }
 }
-pass "$pass SIGTERM passes"
+
+gdb_assert {$pass == $passes} "$passes SIGTERM passes"
-- 
1.9.3


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]