This is the mail archive of the gdb-patches@sourceware.org mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[PING] [PATCH] PR external/{16327,16328}: Remove etc/configure.texi and etc/standards.texi


(Original post at <http://sourceware.org/ml/gdb-patches/2014-05/msg00044.html>.)

This patch removes etc/{configure,standards}.texi, for the reasons given at:

  http://sourceware.org/bugzilla/show_bug.cgi?id=16327
  http://sourceware.org/bugzilla/show_bug.cgi?id=16328

(I left out the diffs for file removals from this message.)

WDYT?

Thanks,
Ludoâ.

etc/ChangeLog
2014-05-05  Ludovic CourtÃs  <ludo@gnu.org>

	PR external/16327
	PR external/16328
	* Makefile.in (MAKEINFO, TEXI2DVI, TEXI2PDF, TEXI2HTML, DVIPS,
	TEXIDIR, INFOFILES, DVIFILES, PDFFILES, HTMLFILES): Remove.
	(all): Remove dependency on 'info'.
	(install): Remove dependency on 'install-info'.
	(standards.info, standards.html, standards.dvi, standards.ps)
	standards.pdf, configure.info, configure.dvi, configure.ps,
	configure.pdf, configure.pdf): Remove.
	(info, install-info, html, install-html, dvi, pdf, install-pdf)
	clean, maintainer-clean, realclean): Remove body.
	* etc/configbuild.ein, etc/configbuild.fig, etc/configbuild.jin,
	etc/configbuild.tin, etc/configdev.ein, etc/configdev.fig,
	etc/configdev.jin, etc/configdev.tin, etc/configure.texi,
	etc/fdl.texi, etc/gnu-oids.texi, etc/make-stds.texi,
	etc/standards.texi: Remove.
---
 etc/Makefile.in     |  182 +--
 etc/configbuild.ein |  149 --
 etc/configbuild.fig |   50 -
 etc/configbuild.jin |  Bin 11123 -> 0 bytes
 etc/configbuild.tin |    9 -
 etc/configdev.ein   |  185 ---
 etc/configdev.fig   |   80 -
 etc/configdev.jin   |  Bin 17967 -> 0 bytes
 etc/configdev.tin   |   17 -
 etc/configure.texi  | 2646 --------------------------------
 etc/fdl.texi        |  505 ------
 etc/gnu-oids.texi   |   52 -
 etc/make-stds.texi  | 1135 --------------
 etc/standards.texi  | 4235 ---------------------------------------------------
 14 files changed, 4 insertions(+), 9241 deletions(-)
 delete mode 100644 etc/configbuild.ein
 delete mode 100644 etc/configbuild.fig
 delete mode 100644 etc/configbuild.jin
 delete mode 100644 etc/configbuild.tin
 delete mode 100644 etc/configdev.ein
 delete mode 100644 etc/configdev.fig
 delete mode 100644 etc/configdev.jin
 delete mode 100644 etc/configdev.tin
 delete mode 100644 etc/configure.texi
 delete mode 100644 etc/fdl.texi
 delete mode 100644 etc/gnu-oids.texi
 delete mode 100644 etc/make-stds.texi
 delete mode 100644 etc/standards.texi

diff --git a/etc/Makefile.in b/etc/Makefile.in
index 0d19c13..4aa64c1 100644
--- a/etc/Makefile.in
+++ b/etc/Makefile.in
@@ -37,187 +37,12 @@ INSTALL 	= @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_DATA    = @INSTALL_DATA@
 
-MAKEINFO = `if [ -f ../texinfo/makeinfo/makeinfo ]; \
-	then echo ../texinfo/makeinfo/makeinfo; \
-	else echo makeinfo; fi`
-TEXI2DVI = `if [ -f ../texinfo/util/texi2dvi ]; \
-	then echo ../texinfo/util/texi2dvi; \
-	else echo texi2dvi; fi`
-TEXI2PDF = `if [ -f ../texinfo/util/texi2dvi ]; \
-	then echo "../texinfo/util/texi2dvi --pdf"; \
-	else echo "texi2dvi --pdf"; fi`
-TEXI2HTML = `if [ -f ../texinfo/makeinfo/makeinfo ]; \
-	then echo "../texinfo/makeinfo/makeinfo --html"; \
-	else echo "makeinfo --html"; fi`
-
-DVIPS = dvips
-
-# Where to find texinfo.tex to format documentation with TeX.
-TEXIDIR = $(srcdir)/../texinfo
-
 #### Host, target, and site specific Makefile fragments come in here.
 ###
 
-INFOFILES = standards.info configure.info
-DVIFILES = standards.dvi configure.dvi
-PDFFILES = standards.pdf configure.pdf
-HTMLFILES = standards.html configure.html
-
-all: info
-install install-strip: install-info
-
-uninstall:
-
-info:
-	for f in $(INFOFILES); do \
-	  if test -f $(srcdir)/`echo $$f | sed -e 's/.info$$/.texi/'`; then \
-	    if $(MAKE) "MAKEINFO=$(MAKEINFO)" $$f; then \
-	      true; \
-	    else \
-	      exit 1; \
-	    fi; \
-	  fi; \
-	done
-
-install-info: info
-	$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(infodir)
-	if test ! -f standards.info; then cd $(srcdir); fi; \
-	if test -f standards.info; then \
-	  for i in standards.info*; do \
-	    $(INSTALL_DATA) $$i $(DESTDIR)$(infodir)/$$i; \
-	  done; \
-	fi
-	if test ! -f configure.info; then cd $(srcdir); fi; \
-	if test -f configure.info; then \
-	  for i in configure.info*; do \
-	    $(INSTALL_DATA) $$i $(DESTDIR)$(infodir)/$$i; \
-	  done; \
-	fi
-
-html:
-	for f in $(HTMLFILES); do \
-	  if test -f $(srcdir)/`echo $$f | sed -e 's/.html$$/.texi/'`; then \
-	    if $(MAKE) "TEXI2HTML=$(TEXI2HTML)" $$f; then \
-	      true; \
-	    else \
-	      exit 1; \
-	    fi; \
-	  fi; \
-	done
-
-install-html: html
-	$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(htmldir)
-	if test ! -f standards.html; then cd $(srcdir); fi; \
-	if test -f standards.html; then \
-	  for i in standards.html*; do \
-	    $(INSTALL_DATA) $$i $(DESTDIR)$(htmldir)/$$i; \
-	  done; \
-	fi
-	if test ! -f configure.html; then cd $(srcdir); fi; \
-	if test -f configure.html; then \
-	  for i in configure.html*; do \
-	    $(INSTALL_DATA) $$i $(DESTDIR)$(htmldir)/$$i; \
-	  done; \
-	fi
-
-dvi:
-	for f in $(DVIFILES); do \
-	  if test -f $(srcdir)/`echo $$f | sed -e 's/.dvi$$/.texi/'`; then \
-	    if $(MAKE) "TEXI2DVI=$(TEXI2DVI)" $$f; then \
-	      true; \
-	    else \
-	      exit 1; \
-	    fi; \
-	  fi; \
-	done
-
-pdf:
-	for f in $(PDFFILES); do \
-	  if test -f $(srcdir)/`echo $$f | sed -e 's/.pdf$$/.texi/'`; then \
-	    if $(MAKE) "TEXI2PDF=$(TEXI2PDF)" $$f; then \
-	      true; \
-	    else \
-	      exit 1; \
-	    fi; \
-	  fi; \
-	done
-
-install-pdf: pdf
-	$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(pdfdir)/etc
-	if test ! -f standards.pdf; then cd $(srcdir); fi; \
-	if test -f standards.pdf; then \
-	  for i in standards.pdf*; do \
-	    $(INSTALL_DATA) $$i $(DESTDIR)$(pdfdir)/etc/$$i; \
-	  done; \
-	fi
-	if test ! -f configure.pdf; then cd $(srcdir); fi; \
-	if test -f configure.pdf; then \
-	  for i in configure.pdf*; do \
-	    $(INSTALL_DATA) $$i $(DESTDIR)$(pdfdir)/etc/$$i; \
-	  done; \
-	fi
-
-standards.info: $(srcdir)/standards.texi $(srcdir)/make-stds.texi
-	$(MAKEINFO) --no-split -I$(srcdir) -o standards.info $(srcdir)/standards.texi
-
-standards.html: $(srcdir)/standards.texi $(srcdir)/make-stds.texi
-	$(TEXI2HTML) --no-split -I$(srcdir) -o standards.html $(srcdir)/standards.texi
-
-standards.dvi: $(srcdir)/standards.texi
-	TEXINPUTS=$(TEXIDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/standards.texi
-
-standards.ps: standards.dvi
-	$(DVIPS) standards.dvi -o standards.ps
-
-standards.pdf: $(srcdir)/standards.texi
-	TEXINPUTS=$(TEXIDIR):$$TEXINPUTS $(TEXI2PDF) $(srcdir)/standards.texi
-
-# makeinfo requires images to be in the current directory.
-configure.info: $(srcdir)/configure.texi $(srcdir)/configdev.tin $(srcdir)/configbuild.tin
-	rm -f configdev.txt configbuild.txt
-	cp $(srcdir)/configdev.tin configdev.txt
-	cp $(srcdir)/configbuild.tin configbuild.txt
-	$(MAKEINFO) -I$(srcdir) -o configure.info $(srcdir)/configure.texi
-	rm -f configdev.txt configbuild.txt
-
-# texi2dvi wants both the .txt and the .eps files.
-configure.dvi: $(srcdir)/configure.texi $(srcdir)/configdev.tin $(srcdir)/configbuild.tin $(srcdir)/configdev.ein $(srcdir)/configbuild.ein
-	rm -f configdev.txt configbuild.txt
-	cp $(srcdir)/configdev.tin configdev.txt
-	cp $(srcdir)/configbuild.tin configbuild.txt
-	rm -f configdev.eps configbuild.eps
-	cp $(srcdir)/configdev.ein configdev.eps
-	cp $(srcdir)/configbuild.ein configbuild.eps
-	TEXINPUTS=$(TEXIDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/configure.texi
-	rm -f configdev.txt configbuild.txt
-	rm -f configdev.eps configbuild.eps
-
-# dvips requires images to be in the current directory
-configure.ps: configure.dvi $(srcdir)/configdev.ein $(srcdir)/configbuild.ein
-	rm -f configdev.eps configbuild.eps
-	cp $(srcdir)/configdev.ein configdev.eps
-	cp $(srcdir)/configbuild.ein configbuild.eps
-	$(DVIPS) configure.dvi -o configure.ps
-	rm -f configdev.eps configbuild.eps
-
-configure.pdf: $(srcdir)/configure.texi $(srcdir)/configdev.tin $(srcdir)/configbuild.tin $(srcdir)/configdev.ein $(srcdir)/configbuild.ein
-	rm -f configdev.pdf configbuild.pdf
-	epstopdf $(srcdir)/configdev.ein -outfile=configdev.pdf
-	epstopdf $(srcdir)/configbuild.ein -outfile=configbuild.pdf
-	TEXINPUTS=$(TEXIDIR):$$TEXINPUTS $(TEXI2PDF) $(srcdir)/configure.texi
-	rm -f configdev.pdf configbuild.pdf
-
-configure.html: $(srcdir)/configure.texi
-	cp $(srcdir)/configdev.jin configdev.jpg
-	cp $(srcdir)/configbuild.jin configbuild.jpg
-	$(TEXI2HTML) --no-split -I$(srcdir) -o configure.html $(srcdir)/configure.texi
+all:
 
 clean:
-	rm -f *.aux *.cp *.cps *.dvi *.fn *.fns *.ky *.kys *.log
-	rm -f *.pg *.pgs *.toc *.tp *.tps *.vr *.vrs
-	rm -f configdev.txt configbuild.txt 
-	rm -f configdev.eps configbuild.eps
-	rm -f configdev.jpg configbuild.jpg
 
 mostlyclean: clean
 
@@ -225,8 +50,6 @@ distclean:   clean
 	rm -f Makefile config.status config.cache
 
 maintainer-clean realclean:   distclean
-	rm -f *.html*
-	rm -f *.info*
 
 Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag) \
 	config.status
@@ -244,5 +67,8 @@ config.status: $(srcdir)/configure
 ## these last targets are for standards.texi conformance
 dist:
 check:
+info html dvi ps pdf:
+install install-strip install-info install-html install-pdf:
 installcheck:
+uninstall:
 TAGS:


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]