This is the mail archive of the gdb-patches@sourceware.org mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: Submition of i386.record.floating.point.patch


Hi Hui,

I am not sure, 
but as I understood you are asking for more example programs ?

-> the example program what I have written, includes most of the basic floating point assmebly isns.
-> only one thing is ; I have referred d8-df opcode map in appendix-B intel insn manual, which assures us that I havent missed anything and it should work for the rest of the insns as well.
-> the insn like FRSTOR, FLDENV might not have been tested.
-> or may be I can test some more insns, by writing gcc inline assembly as far as possible. I am not sure how much it can be assured.

What do you say ?

Regards,
Oza.



--- On Wed, 6/3/09, Hui Zhu <teawater@gmail.com> wrote:

> From: Hui Zhu <teawater@gmail.com>
> Subject: Re: Submition of i386.record.floating.point.patch
> To: "paawan oza" <paawan1982@yahoo.com>
> Cc: gdb-patches@sourceware.org
> Date: Wednesday, June 3, 2009, 8:27 AM
> On Wed, Jun 3, 2009 at 01:58, paawan
> oza <paawan1982@yahoo.com>
> wrote:
> > Hi Hui,
> >
> > I think, you have applied the old patch which I had
> sent earlier with in tar format.
> > the correct patch was in the email body.
> >
> > I am attaching correct patch, please find it
> attached.
> > the patch is tested against the example program which
> I have sent.
> >
> 
> OK.? It works.
> Could you post some example about howto make sure it works
> OK?
> 
> >
> >
> > --- On Tue, 6/2/09, Hui Zhu <teawater@gmail.com>
> wrote:
> >
> >> From: Hui Zhu <teawater@gmail.com>
> >> Subject: Re: Submition of
> i386.record.floating.point.patch
> >> To: "paawan oza" <paawan1982@yahoo.com>
> >> Cc: gdb-patches@sourceware.org
> >> Date: Tuesday, June 2, 2009, 12:27 PM
> >> On Mon, Jun 1, 2009 at 22:54, paawan
> >> oza <paawan1982@yahoo.com>
> >> wrote:
> >> >
> >> > Hi,
> >> >
> >> > I am sorry for the inconvenience caused last
> time,
> >> during patch submition.
> >> > this time I am trying to post everything in
> email
> >> body.
> >> >
> >> >
> >>
> ******************************************************
> >> > ChangeLog:
> >> >
> >>
> ******************************************************
> >> > Current: gdb-6.8.50.20090531
> >> > 2009-05-31 ?Oza ?<paawan1982@yahoo.com>
> >> >
> >> > ? ? ? ?* i386-tdep.c: Support for
> floating point
> >> recording.
> >> > ? ? ? ?* i386-tdep.h: floating point
> registers
> >> enumaration added.
> >> >
> >>
> -------------------------------------------------------
> >> >
> >> >
> >>
> ******************************************************
> >> > README:
> >> >
> >>
> ******************************************************
> >> > Patch description:
> >> >
> >> > -> Provides floating point support for
> i386
> >> ?(reversible debugging:record-replay)
> >> > -> previously gdb was not recording
> floating point
> >> registers, now all the floating point registers
> which are
> >> likely to be changed by floating ? point
> instructions, are
> >> recorded and replayed.
> >> > -> the patch intends to provide the full
> support
> >> for all i386 floating point instructions.
> >> >
> >>
> ---------------------------------------------------------
> >> >
> >> >
> >> >
> >> >
> >>
> ******************************************************
> >> > Patch:i386-record-floats.patch
> >> >
> >>
> ******************************************************
> >> > diff -urN gdb.orig/i386-tdep.c
> gdb.new/i386-tdep.c
> >> > --- gdb.orig/i386-tdep.c ? ? ?
> ?2009-05-29
> >> 17:08:40.000000000 -0400
> >> > +++ gdb.new/i386-tdep.c 2009-06-01
> 20:02:23.000000000
> >> -0400
> >> > @@ -543,6 +543,9 @@
> >> > ?/* The maximum number of saved registers.
> ?This
> >> should include all
> >> > ? ?registers mentioned above, and %eip.
> ?*/
> >> > ?#define I386_NUM_SAVED_REGS ?
> ?I386_NUM_GREGS
> >> > +#define I386_SAVE_FPU_REGS ? ? ? ? ? ?
> 0xFFFD
> >> > +#define I386_SAVE_FPU_ENV ? ? ? ? ? ?
> ?0xFFFE
> >> > +#define I386_SAVE_FPU_ENV_REG_STACK ?
> ?0xFFFF
> >> >
> >> > ?struct i386_frame_cache
> >> > ?{
> >> > @@ -2985,6 +2988,54 @@
> >> > ? return 0;
> >> > ?}
> >> >
> >> > +/* Record the value of floating point
> registers which
> >> will be changed by the current instruction
> >> > + ? to "record_arch_list".
> >> > + ? return -1 if something is wrong. */
> >> > +
> >> > +static int i386_record_floats(struct
> i386_record_s
> >> *ir, uint32_t iregnum)
> >> > +{
> >> > + ?int i;
> >> > +
> >> > + ?/* Oza : push/pop of fpu stack is going
> to happen
> >> > + ? ? currently we store st0-st7 registers,
> but we
> >> need not store all registers all the time.
> >> > + ? ? using fstatus, we use 11-13 bits
> which gives
> >> us stack top and hence we optimize our storage.
> */
> >> > + ?if (I386_SAVE_FPU_REGS == iregnum)
> >> > + ? ?{
> >> > + ? ? ?for
> >> (i=I386_ST0_REGNUM;i<=I386_ST7_REGNUM;i++)
> >> > + ? ? ? ?{
> >> > + ? ? ? ? ?if (record_arch_list_add_reg
> >> (ir->regcache,i))
> >> > + ? ? ? ? ? ?return -1;
> >> > + ? ? ? ?}
> >> > + ? ?}
> >> > + ?else if (I386_SAVE_FPU_ENV == iregnum)
> >> > + ? ?{
> >> > + ? ? ?for
> (i=I386_FCTRL;i<=I386_FOP;i++)
> >> > + ? ? ?{
> >> > + ? ? ? ?if (record_arch_list_add_reg
> >> (ir->regcache,i))
> >> > + ? ? ? ? ?return -1;
> >> > + ? ? ?}
> >> > + ? ?}
> >> > + ?else if (I386_SAVE_FPU_ENV_REG_STACK ==
> iregnum)
> >> > + ? ?{
> >> > + ? ? ?for
> (i=I386_ST0_REGNUM;i<=I386_FOP;i++)
> >> > + ? ? ?{
> >> > + ? ? ? ?if (record_arch_list_add_reg
> >> (ir->regcache,i))
> >> > + ? ? ? ? ?return -1;
> >> > + ? ? ?}
> >> > + ? ?}
> >> > + ?else if (iregnum >= I386_ST0_REGNUM
> &&
> >> iregnum <= I386_FOP)
> >> > + ? ?{
> >> > + ? ? ?if (record_arch_list_add_reg
> >> (ir->regcache,iregnum))
> >> > + ? ? ? ?return -1;
> >> > + ? ?}
> >> > + ?else
> >> > + ? ?{
> >> > + ? ? ?/* param Error */
> >> > + ? ? ?return -1;
> >> > + ? ?}
> >> > + ?return 0;
> >> > +}
> >> > +
> >> > ?/* Parse the current instruction and record
> the
> >> values of the registers and
> >> > ? ?memory that will be changed in current
> >> instruction to "record_arch_list".
> >> > ? ?Return -1 if something wrong. */
> >> > @@ -4035,7 +4086,6 @@
> >> > ? ? ? break;
> >> >
> >> > ? ? ? /* floats */
> >> > - ? ? ?/* It just record the memory change
> of
> >> instrcution. */
> >> > ? ? case 0xd8:
> >> > ? ? case 0xd9:
> >> > ? ? case 0xda:
> >> > @@ -4056,39 +4106,49 @@
> >> > ? ? ? ? ? ?return -1;
> >> > ? ? ? ? ?switch (ir.reg)
> >> > ? ? ? ? ? ?{
> >> > - ? ? ? ? ? case 0x00:
> >> > - ? ? ? ? ? case 0x01:
> >> > ? ? ? ? ? ?case 0x02:
> >> > - ? ? ? ? ? case 0x03:
> >> > + ? ? ? ? ? case 0x12:
> >> > + ? ? ? ? ? case 0x22:
> >> > + ? ? ? ? ? case 0x32:
> >> > + ? ? ? ? ? ? /* for FCOM, FICOM
> nothing to do
> >> */
> >> > + ? ? ? ? ? ? ?break;
> >> > + ? ? ? ? ? ?case 0x03:
> >> > + ? ? ? ? ? case 0x13:
> >> > + ? ? ? ? ? case 0x23:
> >> > + ? ? ? ? ? case 0x33:
> >> > + ? ? ? ? ? ? /* FCOMP, FICOMP pop FPU
> stack,
> >> store all */
> >> > + ? ? ? ? ? ? if
> (i386_record_floats(&ir,
> >> I386_SAVE_FPU_REGS))
> >> > + ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ?break;
> >> > + ? ? ? ? ? case 0x00:
> >> > + ? ? ? ? ? ? ? ? ? case 0x01:
> >> > ? ? ? ? ? ?case 0x04:
> >> > ? ? ? ? ? ?case 0x05:
> >> > ? ? ? ? ? ?case 0x06:
> >> > ? ? ? ? ? ?case 0x07:
> >> > ? ? ? ? ? ?case 0x10:
> >> > - ? ? ? ? ? case 0x11:
> >> > - ? ? ? ? ? case 0x12:
> >> > - ? ? ? ? ? case 0x13:
> >> > + ? ? ? ? ? ? ? ? ? case 0x11:
> >> > ? ? ? ? ? ?case 0x14:
> >> > ? ? ? ? ? ?case 0x15:
> >> > ? ? ? ? ? ?case 0x16:
> >> > ? ? ? ? ? ?case 0x17:
> >> > ? ? ? ? ? ?case 0x20:
> >> > ? ? ? ? ? ?case 0x21:
> >> > - ? ? ? ? ? case 0x22:
> >> > - ? ? ? ? ? case 0x23:
> >> > ? ? ? ? ? ?case 0x24:
> >> > ? ? ? ? ? ?case 0x25:
> >> > ? ? ? ? ? ?case 0x26:
> >> > ? ? ? ? ? ?case 0x27:
> >> > ? ? ? ? ? ?case 0x30:
> >> > ? ? ? ? ? ?case 0x31:
> >> > - ? ? ? ? ? case 0x32:
> >> > - ? ? ? ? ? case 0x33:
> >> > ? ? ? ? ? ?case 0x34:
> >> > ? ? ? ? ? ?case 0x35:
> >> > ? ? ? ? ? ?case 0x36:
> >> > ? ? ? ? ? ?case 0x37:
> >> > - ? ? ? ? ? ? break;
> >> > + ? ? ? ? ? ? /* FADD, FMUL, FSUB,
> FSUBR, FDIV,
> >> FDIVR, FIADD, FIMUL, FISUB, FISUBR, FIDIV, FIDIVR
> >> > + ? ? ? ? ? ? ?ModR/M.reg is an
> extension of
> >> code, always affects st(0) register */
> >> > + ? ? ? ? ? ? if
> (i386_record_floats(&ir,
> >> I386_ST0_REGNUM))
> >> > + ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ?break;
> >> > ? ? ? ? ? ?case 0x08:
> >> > ? ? ? ? ? ?case 0x0a:
> >> > ? ? ? ? ? ?case 0x0b:
> >> > @@ -4096,6 +4156,7 @@
> >> > ? ? ? ? ? ?case 0x19:
> >> > ? ? ? ? ? ?case 0x1a:
> >> > ? ? ? ? ? ?case 0x1b:
> >> > + ? ? ? ? ? case 0x1d:
> >> > ? ? ? ? ? ?case 0x28:
> >> > ? ? ? ? ? ?case 0x29:
> >> > ? ? ? ? ? ?case 0x2a:
> >> > @@ -4103,11 +4164,16 @@
> >> > ? ? ? ? ? ?case 0x38:
> >> > ? ? ? ? ? ?case 0x39:
> >> > ? ? ? ? ? ?case 0x3a:
> >> > - ? ? ? ? ? case 0x3b:
> >> > + ? ? ? ? ? case 0x3b:
> >> > + ? ? ? ? ? case 0x3c:
> >> > + ? ? ? ? ? case 0x3d:
> >> > ? ? ? ? ? ? ?switch (ir.reg & 7)
> >> > ? ? ? ? ? ? ? ?{
> >> > ? ? ? ? ? ? ? ?case 0:
> >> > - ? ? ? ? ? ? ? ? break;
> >> > + ? ? ? ? ? ? ? ? /* FLD, FILD */
> >> > + ? ? ? ? ? ? ? ? if
> >> (i386_record_floats(&ir, I386_SAVE_FPU_REGS))
> >> > + ? ? ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? ? ?break;
> >> > ? ? ? ? ? ? ? ?case 1:
> >> > ? ? ? ? ? ? ? ? ?switch (ir.reg
> >> 4)
> >> > ? ? ? ? ? ? ? ? ? ?{
> >> > @@ -4120,6 +4186,7 @@
> >> > ? ? ? ? ? ? ? ? ? ? ? ?return
> -1;
> >> > ? ? ? ? ? ? ? ? ? ? ?break;
> >> > ? ? ? ? ? ? ? ? ? ?case 3:
> >> > + ? ? ? ? ? ? ? ? ? ? break;
> >> > ? ? ? ? ? ? ? ? ? ?default:
> >> > ? ? ? ? ? ? ? ? ? ? ?if
> >> (record_arch_list_add_mem (addr, 2))
> >> > ? ? ? ? ? ? ? ? ? ? ? ?return
> -1;
> >> > @@ -4130,15 +4197,42 @@
> >> > ? ? ? ? ? ? ? ? ?switch (ir.reg
> >> 4)
> >> > ? ? ? ? ? ? ? ? ? ?{
> >> > ? ? ? ? ? ? ? ? ? ?case 0:
> >> > + ? ? ? ? ? ? ? ? ? ? if
> >> (record_arch_list_add_mem (addr, 4))
> >> > + ? ? ? ? ? ? ? ? ? ? ? return
> -1;
> >> > + ? ? ? ? ? ? ? ? ? ? if (3 ==
> (ir.reg &
> >> 7))
> >> > + ? ? ? ? ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? ? ? ? ?/* FSTP
> m32fp */
> >> > + ? ? ? ? ? ? ? ? ? ? ? if
> >> (i386_record_floats(&ir, I386_SAVE_FPU_REGS))
> >> > + ? ? ? ? ? ? ? ? ? ? ? ? return
> -1;
> >> > + ? ? ? ? ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ? ? ? ? ?break;
> >> > ? ? ? ? ? ? ? ? ? ?case 1:
> >> > ? ? ? ? ? ? ? ? ? ? ?if
> >> (record_arch_list_add_mem (addr, 4))
> >> > ? ? ? ? ? ? ? ? ? ? ? ?return
> -1;
> >> > + ? ? ? ? ? ? ? ? ? ? if ((3 ==
> (ir.reg
> >> & 7)) || (5 == (ir.reg & 7)) || (7 ==
> (ir.reg &
> >> 7)))
> >> > + ? ? ? ? ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? ? ? ? ?/* FSTP
> */
> >> > + ? ? ? ? ? ? ? ? ? ? ? if
> >> (i386_record_floats(&ir, I386_SAVE_FPU_REGS))
> >> > + ? ? ? ? ? ? ? ? ? ? ? ? return
> -1;
> >> > + ? ? ? ? ? ? ? ? ? ? ? ?}
> >> > ? ? ? ? ? ? ? ? ? ? ?break;
> >> > ? ? ? ? ? ? ? ? ? ?case 2:
> >> > ? ? ? ? ? ? ? ? ? ? ?if
> >> (record_arch_list_add_mem (addr, 8))
> >> > ? ? ? ? ? ? ? ? ? ? ? ?return
> -1;
> >> > + ? ? ? ? ? ? ? ? ? ? if (3 ==
> (ir.reg &
> >> 7))
> >> > + ? ? ? ? ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? ? ? ? ?/* FSTP
> m64fp */
> >> > + ? ? ? ? ? ? ? ? ? ? ? if
> >> (i386_record_floats(&ir, I386_SAVE_FPU_REGS))
> >> > + ? ? ? ? ? ? ? ? ? ? ? ? return
> -1;
> >> > + ? ? ? ? ? ? ? ? ? ? ? ?}
> >> > ? ? ? ? ? ? ? ? ? ? ?break;
> >> > ? ? ? ? ? ? ? ? ? ?case 3:
> >> > + ? ? ? ? ? ? ? ? ? ? if ((3 <=
> (ir.reg
> >> & 7)) && (6 <= (ir.reg & 7)))
> >> > + ? ? ? ? ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? ? ? ? ?/*
> FISTP, FBLD,
> >> FILD, FBSTP */
> >> > + ? ? ? ? ? ? ? ? ? ? ? if
> >> (i386_record_floats(&ir, I386_SAVE_FPU_REGS))
> >> > + ? ? ? ? ? ? ? ? ? ? ? ? return
> -1;
> >> > + ? ? ? ? ? ? ? ? ? ? ? ?}
> >> > ? ? ? ? ? ? ? ? ? ?default:
> >> > ? ? ? ? ? ? ? ? ? ? ?if
> >> (record_arch_list_add_mem (addr, 2))
> >> > ? ? ? ? ? ? ? ? ? ? ? ?return
> -1;
> >> > @@ -4147,54 +4241,71 @@
> >> > ? ? ? ? ? ? ? ? ?break;
> >> > ? ? ? ? ? ? ? ?}
> >> > ? ? ? ? ? ? ?break;
> >> > - ? ? ? ? ? case 0x0c:
> >> > - ? ? ? ? ? case 0x0d:
> >> > - ? ? ? ? ? case 0x1d:
> >> > - ? ? ? ? ? case 0x2c:
> >> > - ? ? ? ? ? case 0x3c:
> >> > - ? ? ? ? ? case 0x3d:
> >> > - ? ? ? ? ? ? break;
> >> > - ? ? ? ? ? case 0x0e:
> >> > + ? ? ? ? ? case 0x0c:
> >> > + ? ? ? ? ? ? /* FLDENV */
> >> > + ? ? ? ? ? ? if
> (i386_record_floats(&ir,
> >> I386_SAVE_FPU_ENV_REG_STACK))
> >> > + ? ? ? ? ? ? ? return -1;
> >> > + ? ? ? ? ? ? ?break;
> >> > + ? ? ? ? ? case 0x0d:
> >> > + ? ? ? ? ? ? ?/* FLDCW */
> >> > + ? ? ? ? ? ? if
> (i386_record_floats(&ir,
> >> I386_FCTRL))
> >> > + ? ? ? ? ? ? ? return -1;
> >> > + ? ? ? ? ? ? ?break;
> >> > + ? ? ? ? ? case 0x2c:
> >> > + ? ? ? ? ? ? ?/* FRTSTOR */
> >> > + ? ? ? ? ? ? if
> (i386_record_floats(&ir,
> >> I386_SAVE_FPU_ENV_REG_STACK))
> >> > + ? ? ? ? ? ? ? return -1;
> >> > + ? ? ? ? ? ? break;
> >> > + ? ? ? ? ? case 0x0e:
> >> > ? ? ? ? ? ? ?if (ir.dflag)
> >> > ? ? ? ? ? ? ? ?{
> >> > - ? ? ? ? ? ? ? ? if
> (record_arch_list_add_mem
> >> (addr, 28))
> >> > - ? ? ? ? ? ? ? ? ? return -1;
> >> > + ? ? ? ? ? ? ? if
> (record_arch_list_add_mem
> >> (addr, 28))
> >> > + ? ? ? ? ? ? ? ? return -1;
> >> > ? ? ? ? ? ? ? ?}
> >> > ? ? ? ? ? ? ?else
> >> > ? ? ? ? ? ? ? ?{
> >> > - ? ? ? ? ? ? ? ? if
> (record_arch_list_add_mem
> >> (addr, 14))
> >> > - ? ? ? ? ? ? ? ? ? return -1;
> >> > + ? ? ? ? ? ? ? if
> (record_arch_list_add_mem
> >> (addr, 14))
> >> > + ? ? ? ? ? ? ? ? return -1;
> >> > ? ? ? ? ? ? ? ?}
> >> > ? ? ? ? ? ? ?break;
> >> > - ? ? ? ? ? case 0x0f:
> >> > - ? ? ? ? ? case 0x2f:
> >> > + ? ? ? ? ? case 0x0f:
> >> > + ? ? ? ? ? case 0x2f:
> >> > ? ? ? ? ? ? ?if
> (record_arch_list_add_mem
> >> (addr, 2))
> >> > ? ? ? ? ? ? ? ?return -1;
> >> > ? ? ? ? ? ? ?break;
> >> > - ? ? ? ? ? case 0x1f:
> >> > - ? ? ? ? ? case 0x3e:
> >> > + ? ? ? ? ? case 0x1f:
> >> > + ? ? ? ? ? case 0x3e:
> >> > ? ? ? ? ? ? ?if
> (record_arch_list_add_mem
> >> (addr, 10))
> >> > ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ?/* FSTP, FBSTP */
> >> > + ? ? ? ? ? ? ?if
> (i386_record_floats(&ir,
> >> I386_SAVE_FPU_REGS))
> >> > + ? ? ? ? ? ? ? return -1;
> >> > ? ? ? ? ? ? ?break;
> >> > - ? ? ? ? ? case 0x2e:
> >> > + ? ? ? ? ? case 0x2e:
> >> > ? ? ? ? ? ? ?if (ir.dflag)
> >> > ? ? ? ? ? ? ? ?{
> >> > - ? ? ? ? ? ? ? ? if
> (record_arch_list_add_mem
> >> (addr, 28))
> >> > - ? ? ? ? ? ? ? ? ? return -1;
> >> > - ? ? ? ? ? ? ? ? addr += 28;
> >> > + ? ? ? ? ? ? ? if
> (record_arch_list_add_mem
> >> (addr, 28))
> >> > + ? ? ? ? ? ? ? ? return -1;
> >> > + ? ? ? ? ? ? ? addr += 28;
> >> > ? ? ? ? ? ? ? ?}
> >> > ? ? ? ? ? ? ?else
> >> > ? ? ? ? ? ? ? ?{
> >> > - ? ? ? ? ? ? ? ? if
> (record_arch_list_add_mem
> >> (addr, 14))
> >> > - ? ? ? ? ? ? ? ? ? return -1;
> >> > - ? ? ? ? ? ? ? ? addr += 14;
> >> > + ? ? ? ? ? ? ? if
> (record_arch_list_add_mem
> >> (addr, 14))
> >> > + ? ? ? ? ? ? ? ? return -1;
> >> > + ? ? ? ? ? ? ? addr += 14;
> >> > ? ? ? ? ? ? ? ?}
> >> > ? ? ? ? ? ? ?if
> (record_arch_list_add_mem
> >> (addr, 80))
> >> > ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ?/* FSAVE */
> >> > + ? ? ? ? ? ? if
> (i386_record_floats(&ir,
> >> I386_SAVE_FPU_ENV_REG_STACK))
> >> > + ? ? ? ? ? ? ? return -1;
> >> > ? ? ? ? ? ? ?break;
> >> > - ? ? ? ? ? case 0x3f:
> >> > + ? ? ? ? ? case 0x3f:
> >> > ? ? ? ? ? ? ?if
> (record_arch_list_add_mem
> >> (addr, 8))
> >> > ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? /* FISTP */
> >> > + ? ? ? ? ? ? ?if
> (i386_record_floats(&ir,
> >> I386_SAVE_FPU_REGS))
> >> > + ? ? ? ? ? ? ? return -1;
> >> > ? ? ? ? ? ? ?break;
> >> > ? ? ? ? ? ?default:
> >> > ? ? ? ? ? ? ?ir.addr -= 2;
> >> > @@ -4202,9 +4313,180 @@
> >> > ? ? ? ? ? ? ?goto no_support;
> >> > ? ? ? ? ? ? ?break;
> >> > ? ? ? ? ? ?}
> >> > - ? ? ? }
> >> > + ? ? ? }
> >> > + ? ? ? ?/* opcode is an extension of
> modR/M byte
> >> */
> >> > + ? ? ? else
> >> > + ? ? ? {
> >> > + ? ? ? ? ?switch (opcode)
> >> > + ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ?case 0xd8:
> >> > + ? ? ? ? ? ? ?if
> (i386_record_floats(&ir,
> >> I386_ST0_REGNUM))
> >> > + ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ?break;
> >> > + ? ? ? ? ? ?case 0xd9:
> >> > + ? ? ? ? ? ? ?if (0x0c == (ir.modrm
> >>
> >> 4))
> >> > + ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? ?if ((ir.modrm
> & 0x0f)
> >> <= 7)
> >> > + ? ? ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? ? ?if
> >> (i386_record_floats(&ir, I386_SAVE_FPU_REGS))
> >> > + ? ? ? ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ? ? ?else
> >> > + ? ? ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? ? ?if
> >> (i386_record_floats(&ir, I386_ST0_REGNUM))
> >> > + ? ? ? ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? ? ? ?/* if only
> st(0) is
> >> changing, then we have already recorded */
> >> > + ? ? ? ? ? ? ? ? ? ?if ((ir.modrm
> &
> >> 0x0f) - 0x08)
> >> > + ? ? ? ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? ? ? ?if
> >> (i386_record_floats(&ir, I386_ST0_REGNUM +
> ((ir.modrm
> >> & 0x0f) - 0x08)))
> >> > + ? ? ? ? ? ? ? ? ? ? ? ?return
> -1;
> >> > + ? ? ? ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ?else
> >> > + ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ?switch(ir.modrm)
> >> > + ? ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? ?case 0xe0:
> >> > + ? ? ? ? ? ? ? ? ?case 0xe1:
> >> > + ? ? ? ? ? ? ? ? ?case 0xf0:
> >> > + ? ? ? ? ? ? ? ? ?case 0xf5:
> >> > + ? ? ? ? ? ? ? ? ?case 0xf8:
> >> > + ? ? ? ? ? ? ? ? ?case 0xfa:
> >> > + ? ? ? ? ? ? ? ? ?case 0xfc:
> >> > + ? ? ? ? ? ? ? ? ?case 0xfe:
> >> > + ? ? ? ? ? ? ? ? ?case 0xff:
> >> > + ? ? ? ? ? ? ? ? ? ?if
> >> (i386_record_floats(&ir, I386_ST0_REGNUM))
> >> > + ? ? ? ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? ? ? ?break;
> >> > + ? ? ? ? ? ? ? ? ?case 0xf1:
> >> > + ? ? ? ? ? ? ? ? ?case 0xf2:
> >> > + ? ? ? ? ? ? ? ? ?case 0xf3:
> >> > + ? ? ? ? ? ? ? ? ?case 0xf4:
> >> > + ? ? ? ? ? ? ? ? ?case 0xf6:
> >> > + ? ? ? ? ? ? ? ? ?case 0xf7:
> >> > + ? ? ? ? ? ? ? ? ?case 0xe8:
> >> > + ? ? ? ? ? ? ? ? ?case 0xe9:
> >> > + ? ? ? ? ? ? ? ? ?case 0xea:
> >> > + ? ? ? ? ? ? ? ? ?case 0xeb:
> >> > + ? ? ? ? ? ? ? ? ?case 0xec:
> >> > + ? ? ? ? ? ? ? ? ?case 0xed:
> >> > + ? ? ? ? ? ? ? ? ?case 0xee:
> >> > + ? ? ? ? ? ? ? ? ?case 0xf9:
> >> > + ? ? ? ? ? ? ? ? ?case 0xfb:
> >> > + ? ? ? ? ? ? ? ? ? ?if
> >> (i386_record_floats(&ir, I386_SAVE_FPU_REGS))
> >> > + ? ? ? ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? ? ? ?break;
> >> > + ? ? ? ? ? ? ? ? ?case 0xfd:
> >> > + ? ? ? ? ? ? ? ? ? ?if
> >> (i386_record_floats(&ir, I386_ST0_REGNUM))
> >> > + ? ? ? ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? ? ? ?if
> >> (i386_record_floats(&ir, I386_ST1_REGNUM))
> >> > + ? ? ? ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? ? ? ?break;
> >> > + ? ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ?break;
> >> > + ? ? ? ? ? ?case 0xda:
> >> > + ? ? ? ? ? ? ?if (0xe9 == ir.modrm)
> >> > + ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? if
> (i386_record_floats(&ir,
> >> I386_SAVE_FPU_REGS))
> >> > + ? ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ?else if ((0x0c ==
> ir.modrm
> >> >> 4) || (0x0d == ir.modrm >> 4))
> >> > + ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ?if
> >> (i386_record_floats(&ir, I386_ST0_REGNUM))
> >> > + ? ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? ?if (((ir.modrm &
> 0x0f)
> >> > 0) && ((ir.modrm & 0x0f) <=
> 7))
> >> > + ? ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? ?if
> >> (i386_record_floats(&ir, I386_ST0_REGNUM +
> (ir.modrm
> >> & 0x0f)))
> >> > + ? ? ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ? ?else if ((ir.modrm
> &
> >> 0x0f) - 0x08)
> >> > + ? ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? if
> >> (i386_record_floats(&ir, I386_ST0_REGNUM +
> ((ir.modrm
> >> & 0x0f) - 0x08)))
> >> > + ? ? ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ?break;
> >> > + ? ? ? ? ? ?case 0xdb:
> >> > + ? ? ? ? ? ? ?if (0xe3 == ir.modrm)
> >> > + ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? if
> (i386_record_floats(&ir,
> >> I386_SAVE_FPU_ENV))
> >> > + ? ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ?else if ((0x0c ==
> ir.modrm
> >> >> 4) || (0x0d == ir.modrm >> 4))
> >> > + ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ?if
> >> (i386_record_floats(&ir, I386_ST0_REGNUM))
> >> > + ? ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? ?if (((ir.modrm &
> 0x0f)
> >> > 0) && ((ir.modrm & 0x0f) <=
> 7))
> >> > + ? ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? ?if
> >> (i386_record_floats(&ir, I386_ST0_REGNUM +
> (ir.modrm
> >> & 0x0f)))
> >> > + ? ? ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ? ?else if ((ir.modrm
> &
> >> 0x0f) - 0x08)
> >> > + ? ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? if
> >> (i386_record_floats(&ir, I386_ST0_REGNUM +
> ((ir.modrm
> >> & 0x0f) - 0x08)))
> >> > + ? ? ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ?break;
> >> > + ? ? ? ? ? ?case 0xdc:
> >> > + ? ? ? ? ? ? ?if ((0x0c == ir.modrm
> >>
> >> 4) || (0x0d == ir.modrm >> 4) || (0x0f ==
> ir.modrm
> >> >> 4))
> >> > + ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ?if ((ir.modrm &
> 0x0f)
> >> <= 7)
> >> > + ? ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? ?if
> >> (i386_record_floats(&ir, I386_ST0_REGNUM +
> (ir.modrm
> >> & 0x0f)))
> >> > + ? ? ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ? ?else
> >> > + ? ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? if
> >> (i386_record_floats(&ir, I386_ST0_REGNUM +
> ((ir.modrm
> >> & 0x0f) - 0x08)))
> >> > + ? ? ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ? break;
> >> > + ? ? ? ? ? ?case 0xdd:
> >> > + ? ? ? ? ? ? ?if (0x0c == ir.modrm
> >>
> >> 4)
> >> > + ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? ?if
> >> (i386_record_floats(&ir,I386_FTAG))
> >> > + ? ? ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ?else if ((0x0d ==
> ir.modrm
> >> >> 4) || (0x0e == ir.modrm >> 4))
> >> > + ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? ?if ((ir.modrm
> & 0x0f)
> >> <= 7)
> >> > + ? ? ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? ? ? ?if
> >> (i386_record_floats(&ir, I386_ST0_REGNUM +
> (ir.modrm
> >> & 0x0f)))
> >> > + ? ? ? ? ? ? ? ? ? ? ? ?return
> -1;
> >> > + ? ? ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ? ? ?else
> >> > + ? ? ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? ? ? ?if
> >> (i386_record_floats(&ir, I386_SAVE_FPU_REGS))
> >> > + ? ? ? ? ? ? ? ? ? ? ? ?return
> -1;
> >> > + ? ? ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ?break;
> >> > + ? ? ? ? ? ?case 0xde:
> >> > + ? ? ? ? ? ? ?if ((0x0c == ir.modrm
> >>
> >> 4) || (0x0e == ir.modrm >> 4) || (0x0f ==
> ir.modrm
> >> >> 4) || (0xd9 == ir.modrm))
> >> > + ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? ?if
> >> (i386_record_floats(&ir, I386_SAVE_FPU_REGS))
> >> > + ? ? ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ?break;
> >> > + ? ? ? ? ? ?case 0xdf:
> >> > + ? ? ? ? ? ? if (0xe0 == ir.modrm)
> >> > + ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? ?if
> >> (record_arch_list_add_reg (ir.regcache,
> I386_EAX_REGNUM))
> >> > + ? ? ? ? ? ? ? ? ? return -1;
> >> > + ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ?else if ((0x0f ==
> ir.modrm
> >> >> 4) || (0x0e == ir.modrm >> 4))
> >> > + ? ? ? ? ? ? ? ?{
> >> > + ? ? ? ? ? ? ? ? ?if
> >> (i386_record_floats(&ir, I386_SAVE_FPU_REGS))
> >> > + ? ? ? ? ? ? ? ? ? ?return -1;
> >> > + ? ? ? ? ? ? ? ?}
> >> > + ? ? ? ? ? ? ?break;
> >> > + ? ? ? ? ? ?}
> >> > + ? ? ? ?}
> >> > ? ? ? break;
> >> > -
> >> > ? ? ? /* string ops */
> >> > ? ? ? /* movsS */
> >> > ? ? case 0xa4:
> >> > @@ -4623,10 +4905,17 @@
> >> > ? ? ? /* fwait */
> >> > ? ? ? /* XXX */
> >> > ? ? case 0x9b:
> >> > - ? ? ?printf_unfiltered (_("Process
> record doesn't
> >> support instruction "
> >> > - ? ? ? ? ? ? ? ? ? ? ? ?
> ?"fwait.\n"));
> >> > - ? ? ?ir.addr -= 1;
> >> > - ? ? ?goto no_support;
> >> > + ? ? ?if (target_read_memory (ir.addr,
> &tmpu8,
> >> 1))
> >> > + ? ? ? {
> >> > + ? ? ? ? if (record_debug)
> >> > + ? ? ? ? ? printf_unfiltered
> (_("Process record:
> >> error reading memory at "
> >> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ?
> ? ?"addr
> >> 0x%s len = 1.\n"),
> >> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ?
> ?paddr_nz
> >> (ir.addr));
> >> > + ? ? ? ? return -1;
> >> > + ? ? ? }
> >> > + ? ? ?opcode = (uint32_t) tmpu8;
> >> > + ? ? ?ir.addr++;
> >> > + ? ? ?goto reswitch;
> >> > ? ? ? break;
> >> >
> >> > ? ? ? /* int3 */
> >> > diff -urN gdb.orig/i386-tdep.h
> gdb.new/i386-tdep.h
> >> > --- gdb.orig/i386-tdep.h ? ? ?
> ?2009-05-17
> >> 17:56:44.000000000 -0400
> >> > +++ gdb.new/i386-tdep.h 2009-05-31
> 16:33:14.000000000
> >> -0400
> >> > @@ -145,7 +145,22 @@
> >> > ? I386_ES_REGNUM, ? ? ? ? ? ? ?/* %es
> */
> >> > ? I386_FS_REGNUM, ? ? ? ? ? ? ?/* %fs
> */
> >> > ? I386_GS_REGNUM, ? ? ? ? ? ? ?/* %gs
> */
> >> > - ?I386_ST0_REGNUM ? ? ? ? ? ? ?/*
> %st(0) */
> >> > + ?I386_ST0_REGNUM, ? ? ? ? ? ? /*
> %st(0) */
> >> > + ?I386_ST1_REGNUM, ? ? ? ? ? ? /*
> %st(1) */
> >> > + ?I386_ST2_REGNUM, ? ? ? ? ? ? /*
> %st(2) */
> >> > + ?I386_ST3_REGNUM, ? ? ? ? ? ? /*
> %st(3) */
> >> > + ?I386_ST4_REGNUM, ? ? ? ? ? ? /*
> %st(4) */
> >> > + ?I386_ST5_REGNUM, ? ? ? ? ? ? /*
> %st(5) */
> >> > + ?I386_ST6_REGNUM, ? ? ? ? ? ? /*
> %st(6) */
> >> > + ?I386_ST7_REGNUM, ? ? ? ? ? ? /*
> %st(7) */
> >> > + ?I386_FCTRL, ? ? ? ? ? ? ? ? ?/*
> floating
> >> point env regs : FCTRL-FOP */
> >> > + ?I386_FSTAT,
> >> > + ?I386_FTAG,
> >> > + ?I386_FISEG,
> >> > + ?I386_FIOFF,
> >> > + ?I386_FOSEG,
> >> > + ?I386_FOOFF,
> >> > + ?I386_FOP
> >> > ?};
> >> >
> >>
> >> About this part, I think this is my mistake. ?I
> didn't
> >> take fp work
> >> for now very clear (Or I am still not clear with
> x86 fp).
> >> FCTRL, FOP and so on are the fp reg of amd64.
> ?For
> >> now, prec is still
> >> not support amd64 (I am working on it).
> >> And amd64's support are in amd64-tedp.... files.
> >> Change i386_regnum
> >> is not a good idea.
> >>
> >> I suggest you divide fp patch to 2 parts. One is
> for i386,
> >> the other for amd64.
> >> For now, just send i386 patch for review. ?And
> send
> >> amd64 patch when
> >> prec support amd64.
> >>
> 
> What do you think about my idea?
> 
> 
> Thanks,
> Hui
> 
> 
> >>
> >>
> >> > ?#define I386_NUM_GREGS 16
> >> >
> >> >
> >> >
> >> >
> >> >
> >>
> *******************************************************
> >> > test-example which does basic verification
> for the
> >> patch.
> >> >
> >>
> *******************************************************
> >> >
> >> > #include <stdio.h>
> >> > #include <math.h>
> >> >
> >> > int main()
> >> > {
> >> > ? ? ? ?float
> no1,no2,no3,no4,no5,no6,no7;
> >> > ? ? ? ?double x = 100.345, y = 25.7789;
> >> > ? ? ? ?long double ldx =
> 88888888888888888888.88,
> >> ldy = 9999999999999999999.99;
> >> > ? ? ? ?float result,resultd,resultld;
> >> > ? ? ? ?no1 = 10.45;
> >> > ? ? ? ?no2 = 20.77;
> >> > ? ? ? ?no3 = 156.89874646;
> >> > ? ? ? ?no4 = 14.56;
> >> > ? ? ? ?no5 = 11.11;
> >> > ? ? ? ?no6 = 66.77;
> >> > ? ? ? ?no7 = 88.88;
> >> >
> >> > ? ? ? ?result = no1 + no2 + no3 + no4 +
> no5 + no6
> >> + no7;
> >> > ? ? ? ?printf("result is %f\n",result);
> >> >
> >> > ? ? ? ?result = fmodf(no2,no1);
> >> > ? ? ? ?printf("result is %f\n",result);
> >> >
> >> > ? ? ? ?resultd = fmod(x,y);
> >> > ? ? ? ?printf("result is %f\n",resultd);
> >> >
> >> > ? ? ? ?resultld = fmodl(ldy,ldy);
> >> > ? ? ? ?printf("result is
> %f\n",resultld);
> >> >
> >> > ? ? ? ?result = fabsf(no1);
> >> > ? ? ? ?printf("result is %f\n",result);
> >> >
> >> > ? ? ? ?result = no3 / no4;
> >> > ? ? ? ?printf("result is %f\n",result);
> >> >
> >> > ? ? ? ?result = no1 * no2 * no3 * no4;
> >> > ? ? ? ?printf("result is %f\n",result);
> >> >
> >> > ? ? ? ?result = sin(30);
> >> > ? ? ? ?printf("result is %f\n",result);
> >> >
> >> > ? ? ? ?result = cos(30);
> >> > ? ? ? ?printf("result is %f\n",result);
> >> >
> >> > ? ? ? ?result = tan(30);
> >> > ? ? ? ?printf("result is %f\n",result);
> >> >
> >> > ? ? ? ?result = atan(30);
> >> > ? ? ? ?printf("result is %f\n",result);
> >> >
> >> > ? ? ? ?result = sqrt(no3);
> >> > ? ? ? ?printf("result is %f\n",result);
> >> >
> >> > ? ? ? ?result = log10(no3);
> >> > ? ? ? ?printf("result is %f\n",result);
> >> >
> >> > ? ? ? ?result = log(no3);
> >> > ? ? ? ?printf("result is %f\n",result);
> >> >
> >> > ? ? ? ?result = exp10(no3);
> >> > ? ? ? ?printf("result is %f\n",result);
> >> >
> >> > ? ? ? ?result = exp(no3);
> >> > ? ? ? ?printf("result is %f\n",result);
> >> >
> >> > ? ? ? ?ldy = 88888888888888888888.88;
> >> > ? ? ? ?if (ldx == ldy)
> >> > ? ? ? ? ?ldy =
> 7777777777777777777777777777.777;
> >> > ? ? ? ?else
> >> > ? ? ? ? ?ldy =
> 666666666666666666666666666.666;
> >> >
> >> > }
> >>
> >> With this example, what I got is:
> >> gdb ./a.out
> >> GNU gdb (GDB) 6.8.50.20090602-cvs
> >> Copyright (C) 2009 Free Software Foundation, Inc.
> >> License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
> >> This is free software: you are free to change and
> >> redistribute it.
> >> There is NO WARRANTY, to the extent permitted by
> law.
> >> Type "show copying"
> >> and "show warranty" for details.
> >> This GDB was configured as "i686-pc-linux-gnu".
> >> For bug reporting instructions, please see:
> >> <http://www.gnu.org/software/gdb/bugs/>...
> >> Setting up the environment for debugging gdb.
> >> Function "internal_error" not defined.
> >> Make breakpoint pending on future shared library
> load? (y
> >> or [n])
> >> [answered N; input not from terminal]
> >> Function "info_command" not defined.
> >> Make breakpoint pending on future shared library
> load? (y
> >> or [n])
> >> [answered N; input not from terminal]
> >> /home/teawater/gdb/bgdb/gdb/.gdbinit:8: Error in
> sourced
> >> command file:
> >> No breakpoint number 0.
> >> (gdb) start
> >> During symbol reading, DW_AT_name missing from
> >> DW_TAG_base_type.
> >> Temporary breakpoint 1 at 0x8048608: file 1.c,
> line 7.
> >> Starting program:
> /home/teawater/gdb/bgdb/gdb/a.out
> >>
> >> Temporary breakpoint 1, main () at 1.c:7
> >> 7 ? ? ? ? ? double
> >> x = 100.345, y = 25.7789;
> >> (gdb) record
> >> (gdb) c
> >> Continuing.
> >> result is 369.438751
> >> Process record doesn't support instruction fwait.
> >> Process record doesn't support instruction 0x9b at
> address
> >> 0xb7fa35fa.
> >> Process record: failed to record execution log.
> >>
> >> Program received signal SIGTRAP, Trace/breakpoint
> trap.
> >> 0xb7fa35fa in ?? () from
> /lib/tls/i686/cmov/libm.so.6
> >> (gdb)
> >>
> >>
> >> Thanks,
> >> Hui
> >>
> >
> >
> >
> 




Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]