This is the mail archive of the gdb-patches@sourceware.org mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: [RFA] fix *stopped for CLI commands


On Sunday 15 February 2009 18:47:28 Pedro Alves wrote:
> Oops, I'm seeing this:
> 
>  Running ../../../src/gdb/testsuite/gdb.gdb/observer.exp ...
>  FAIL: gdb.gdb/observer.exp: second observer attached; check second observer counter value

Apologies, I've shortcutted the testing by running on MI tests, since "obviously" that
was a MI-only change. 

> Alternatively, we could use a safer and more future proof test specific
> notification in doc/observer.texi, instead of reusing the normal_stop
> notification.  Say,
> 
>  @deftypefun void test_notification (int @var{somearg})
>  For internal testing.  Do not use.  See testsuite/gdb.gdb/observer.exp.
>  @end deftypefun

Here's a patch implementing this approach. OK?

- Volodya

 


commit 1160d59db83b2a172c980bb7fa5c9dc9961d1b18
Author: Vladimir Prus <vladimir@codesourcery.com>
Date:   Tue Feb 17 22:19:34 2009 +0300

    Unbreak observer tests.
    
    	gdb/
    	* observer.c (observer_test_first_notification_function)
    	(observer_test_second_notification_function)
    	(observer_test_third_notification_function): Adjust prototype.
    
    	gdb/doc/
    	* observer.texi (test_notification): New observer.
    
    	gdb/testsuite/
    	* gdb.gdb/observer.exp: Use test_notification observer, not
    	normal_stop, everywhere.
    	(test_normal_stop_notifications): Rename to...
    	(test_notifications): ...this.
    	(test_observer_normal_stop): Rename to...
    	(test_observer): ...this.

diff --git a/gdb/doc/observer.texi b/gdb/doc/observer.texi
index c8e8b96..04f5034 100644
--- a/gdb/doc/observer.texi
+++ b/gdb/doc/observer.texi
@@ -200,3 +200,8 @@ Either @value{GDBN} detached from the inferior, or the inferior
 exited.  The argument @var{pid} identifies the inferior.
 @end deftypefun
 
+ @deftypefun void test_notification (int @var{somearg})
+This observer is used for internal testing.  Do not use.  
+See testsuite/gdb.gdb/observer.exp.
+ @end deftypefun
+
diff --git a/gdb/observer.c b/gdb/observer.c
index 8a059c1..106bfcd 100644
--- a/gdb/observer.c
+++ b/gdb/observer.c
@@ -181,19 +181,19 @@ int observer_test_second_observer = 0;
 int observer_test_third_observer = 0;
 
 void
-observer_test_first_notification_function (struct bpstats *bs)
+observer_test_first_notification_function (int arg)
 {
   observer_test_first_observer++;
 }
 
 void
-observer_test_second_notification_function (struct bpstats *bs)
+observer_test_second_notification_function (int arg)
 {
   observer_test_second_observer++;
 }
 
 void
-observer_test_third_notification_function (struct bpstats *bs)
+observer_test_third_notification_function (int arg)
 {
   observer_test_third_observer++;
 }
diff --git a/gdb/testsuite/gdb.gdb/observer.exp b/gdb/testsuite/gdb.gdb/observer.exp
index afc6909..e57b91b 100644
--- a/gdb/testsuite/gdb.gdb/observer.exp
+++ b/gdb/testsuite/gdb.gdb/observer.exp
@@ -101,32 +101,32 @@ proc setup_test { executable } {
 }
 
 proc attach_first_observer { message } {
-    gdb_test "set \$first_obs = observer_attach_normal_stop (&observer_test_first_notification_function)" \
+    gdb_test "set \$first_obs = observer_attach_test_notification (&observer_test_first_notification_function)" \
 	"" "$message; attach first observer"
 }
 
 proc attach_second_observer { message } {
-    gdb_test "set \$second_obs = observer_attach_normal_stop (&observer_test_second_notification_function)" \
+    gdb_test "set \$second_obs = observer_attach_test_notification (&observer_test_second_notification_function)" \
 	"" "$message; attach second observer"
 }
 
 proc attach_third_observer { message } {
-    gdb_test "set \$third_obs = observer_attach_normal_stop (&observer_test_third_notification_function)" \
+    gdb_test "set \$third_obs = observer_attach_test_notification (&observer_test_third_notification_function)" \
 	"" "$message; attach third observer"
 }
 
 proc detach_first_observer { message } {
-    gdb_test "call observer_detach_normal_stop (\$first_obs)" \
+    gdb_test "call observer_detach_test_notification (\$first_obs)" \
 	"" "$message; detach first observer"
 }
 
 proc detach_second_observer { message } {
-    gdb_test "call observer_detach_normal_stop (\$second_obs)" \
+    gdb_test "call observer_detach_test_notification (\$second_obs)" \
 	"" "$message; detach second observer"
 }
 
 proc detach_third_observer { message } {
-    gdb_test "call observer_detach_normal_stop (\$third_obs)" \
+    gdb_test "call observer_detach_test_notification (\$third_obs)" \
 	"" "$message; detach third observer"
 }
 
@@ -151,21 +151,21 @@ proc reset_counters { message } {
 	"$message; reset third observer counter"
 }
 
-proc test_normal_stop_notifications { first second third message args } {
+proc test_notifications { first second third message args } {
     # Do any initialization
     for {set i 0} {$i < [llength $args]} {incr i} {
 	[lindex $args $i] $message
     }
     reset_counters $message
-    # Call observer_notify_normal_stop.  Note that this procedure
+    # Call observer_notify_test_notification.  Note that this procedure
     # takes one argument, but this argument is ignored by the observer
     # callbacks we have installed.  So we just pass an arbitrary value.
-    gdb_test "call observer_notify_normal_stop (0)" "" \
+    gdb_test "call observer_notify_test_notification (0)" "" \
 	"$message; sending notification"
     check_counters $first $second $third $message
 }
 
-proc test_observer_normal_stop { executable } {
+proc test_observer { executable } {
 
     set setup_result [setup_test $executable]
     if {$setup_result <0} then {
@@ -173,56 +173,56 @@ proc test_observer_normal_stop { executable } {
     }
 
     # First, try sending a notification without any observer attached.
-    test_normal_stop_notifications 0 0 0 "no observer attached"
+    test_notifications 0 0 0 "no observer attached"
 
     # Now, attach one observer, and send a notification.
-    test_normal_stop_notifications 0 1 0 "second observer attached" \
+    test_notifications 0 1 0 "second observer attached" \
 	attach_second_observer
 
     # Remove the observer, and send a notification.
-    test_normal_stop_notifications 0 0 0 "second observer detached" \
+    test_notifications 0 0 0 "second observer detached" \
 	detach_second_observer
 
     # With a new observer.
-    test_normal_stop_notifications 1 0 0 "1st observer added" \
+    test_notifications 1 0 0 "1st observer added" \
 	attach_first_observer
 
     # With 2 observers.
-    test_normal_stop_notifications 1 1 0 "2nd observer added" \
+    test_notifications 1 1 0 "2nd observer added" \
 	attach_second_observer
 
     # With 3 observers.
-    test_normal_stop_notifications 1 1 1 "3rd observer added" \
+    test_notifications 1 1 1 "3rd observer added" \
 	attach_third_observer
 
     # Remove middle observer.
-    test_normal_stop_notifications 1 0 1 "2nd observer removed" \
+    test_notifications 1 0 1 "2nd observer removed" \
 	detach_second_observer
 
     # Remove first observer.
-    test_normal_stop_notifications 0 0 1 "1st observer removed" \
+    test_notifications 0 0 1 "1st observer removed" \
 	detach_first_observer
 
     # Remove last observer.
-    test_normal_stop_notifications 0 0 0 "3rd observer removed" \
+    test_notifications 0 0 0 "3rd observer removed" \
 	detach_third_observer
 
     # Go back to 3 observers, and remove them in a different order...
-    test_normal_stop_notifications 1 1 1 "three observers added" \
+    test_notifications 1 1 1 "three observers added" \
 	attach_first_observer \
 	attach_second_observer \
 	attach_third_observer 
 
     # Remove the third observer.
-    test_normal_stop_notifications 1 1 0 "third observer removed" \
+    test_notifications 1 1 0 "third observer removed" \
 	detach_third_observer
 
     # Remove the second observer.
-    test_normal_stop_notifications 1 0 0 "second observer removed" \
+    test_notifications 1 0 0 "second observer removed" \
 	detach_second_observer
 
     # Remove the first observer, no more observers.
-    test_normal_stop_notifications 0 0 0 "first observer removed" \
+    test_notifications 0 0 0 "first observer removed" \
 	detach_first_observer
 
     return 0
@@ -262,7 +262,7 @@ remote_file host delete x$tool
 
 gdb_start
 set file [remote_download host $GDB_FULLPATH x$tool]
-set result [test_observer_normal_stop $file];
+set result [test_observer $file];
 gdb_exit;
 catch "remote_file host delete $file";
 

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]