This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
[PATCH]: Fix gdb.mi/mi-regs.exp
- From: "David S. Miller" <davem at davemloft dot net>
- To: gdb-patches at sources dot redhat dot com
- Date: Sat, 08 Apr 2006 21:21:33 -0700 (PDT)
- Subject: [PATCH]: Fix gdb.mi/mi-regs.exp
This test only runs on sparc 32-bit platforms, and when the "d?"
pseudo registers were added to the sparc target nobody noticed that
this caused the mi-regs test case to regress.
Also, the 111-data-list-register-values test that runs before the
executable is started expects a command name prefix to the error
message, but that won't happen because this message originates from
the generic frame handling in gdb/frame.c
Ok to apply?
2006-04-08 David S. Miller <davem@sunset.davemloft.net>
* gdb.mi/mi-regs.exp (111-data-list-register-values x): "No registers"
will get printed without a mi_cmd_data_list_register_values prefix.
(*-data-list-register-*): Correct regular expressions to expect the new
pseudo d? floating point registers.
--- gdb.mi/mi-regs.exp.~1~ 2004-08-09 09:32:44.000000000 -0700
+++ gdb.mi/mi-regs.exp 2006-04-08 21:10:55.000000000 -0700
@@ -52,7 +52,7 @@
"wrong arguments"
mi_gdb_test "111-data-list-register-values x" \
- ".*111\\^error,msg=\"mi_cmd_data_list_register_values: No registers\.\"" \
+ ".*111\\^error,msg=\"No registers\.\"" \
"no executable"
}
@@ -71,41 +71,41 @@
set float2 "\\-?\[0-9\]+"
mi_gdb_test "111-data-list-register-names" \
- "111\\^done,register-names=\\\[\"g0\",\"g1\",\"g2\",\"g3\",\"g4\",\"g5\",\"g6\",\"g7\",\"o0\",\"o1\",\"o2\",\"o3\",\"o4\",\"o5\",\"sp\",\"o7\",\"l0\",\"l1\",\"l2\",\"l3\",\"l4\",\"l5\",\"l6\",\"l7\",\"i0\",\"i1\",\"i2\",\"i3\",\"i4\",\"i5\",\"fp\",\"i7\",\"f0\",\"f1\",\"f2\",\"f3\",\"f4\",\"f5\",\"f6\",\"f7\",\"f8\",\"f9\",\"f10\",\"f11\",\"f12\",\"f13\",\"f14\",\"f15\",\"f16\",\"f17\",\"f18\",\"f19\",\"f20\",\"f21\",\"f22\",\"f23\",\"f24\",\"f25\",\"f26\",\"f27\",\"f28\",\"f29\",\"f30\",\"f31\",\"y\",\"psr\",\"wim\",\"tbr\",\"pc\",\"npc\",\"fpsr\",\"cpsr\"\\\]" \
+ "111\\^done,register-names=\\\[\"g0\",\"g1\",\"g2\",\"g3\",\"g4\",\"g5\",\"g6\",\"g7\",\"o0\",\"o1\",\"o2\",\"o3\",\"o4\",\"o5\",\"sp\",\"o7\",\"l0\",\"l1\",\"l2\",\"l3\",\"l4\",\"l5\",\"l6\",\"l7\",\"i0\",\"i1\",\"i2\",\"i3\",\"i4\",\"i5\",\"fp\",\"i7\",\"f0\",\"f1\",\"f2\",\"f3\",\"f4\",\"f5\",\"f6\",\"f7\",\"f8\",\"f9\",\"f10\",\"f11\",\"f12\",\"f13\",\"f14\",\"f15\",\"f16\",\"f17\",\"f18\",\"f19\",\"f20\",\"f21\",\"f22\",\"f23\",\"f24\",\"f25\",\"f26\",\"f27\",\"f28\",\"f29\",\"f30\",\"f31\",\"y\",\"psr\",\"wim\",\"tbr\",\"pc\",\"npc\",\"fsr\",\"csr\",\"d0\",\"d2\",\"d4\",\"d6\",\"d8\",\"d10\",\"d12\",\"d14\",\"d16\",\"d18\",\"d20\",\"d22\",\"d24\",\"d26\",\"d28\",\"d30\"\\\]" \
"list register names"
mi_gdb_test "222-data-list-register-values x" \
- "222\\^done,register-values=\\\[\{number=\"0\",value=\"$hex\"\}.*\{number=\"71\",value=\"$hex\"\}\\\]" \
+ "222\\^done,register-values=\\\[\{number=\"0\",value=\"$hex\"\}.*\{number=\"87\",value=\"$hex\"\}\\\]" \
"register values x"
mi_gdb_test "333-data-list-register-values f" \
- "333\\^done,register-values=\\\[\{number=\"0\",value=\"$float\"\},\{number=\"1\",value=\"$float\"\},.*\{number=\"71\",value=\"$float\"\}\\\]" \
+ "333\\^done,register-values=\\\[\{number=\"0\",value=\"$float\"\},\{number=\"1\",value=\"$float\"\},.*\{number=\"87\",value=\"$float\"\}\\\]" \
"register values f"
mi_gdb_test "444-data-list-register-values d" \
- "444\\^done,register-values=\\\[\{number=\"0\",value=\"$decimal\"\}.*\{number=\"71\",value=\"$decimal\"\}\\\]" \
+ "444\\^done,register-values=\\\[\{number=\"0\",value=\"$decimal\"\}.*\{number=\"87\",value=\"$decimal\"\}\\\]" \
"register values d"
mi_gdb_test "555-data-list-register-values o" \
- "555\\^done,register-values=\\\[\{number=\"0\",value=\"$octal\"\}.*\{number=\"71\",value=\"$octal\"\}\\\]" \
+ "555\\^done,register-values=\\\[\{number=\"0\",value=\"$octal\"\}.*\{number=\"87\",value=\"$octal\"\}\\\]" \
"register values o"
mi_gdb_test "666-data-list-register-values t" \
- "666\\^done,register-values=\\\[\{number=\"0\",value=\"$binary\"\}.*\{number=\"71\",value=\"$binary\"\}\\\]" \
+ "666\\^done,register-values=\\\[\{number=\"0\",value=\"$binary\"\}.*\{number=\"87\",value=\"$binary\"\}\\\]" \
"register values t"
- # On the sparc, registers 0-31 are int, 32-63 float, 64-71 int
+ # On the sparc, registers 0-31 are int, 32-63 float, 64-71 int, 72-87 float
mi_gdb_test "777-data-list-register-values N" \
- "777\\^done,register-values=\\\[\{number=\"0\",value=\"$decimal\"\}.*\{number=\"31\",value=\"$decimal\"\},\{number=\"32\",value=\"$float\"\}.*\{number=\"63\",value=\"$float\"\},\{number=\"64\",value=\"$decimal\"\}.*\{number=\"71\",value=\"$decimal\"\}\\\]" \
+ "777\\^done,register-values=\\\[\{number=\"0\",value=\"$decimal\"\}.*\{number=\"31\",value=\"$decimal\"\},\{number=\"32\",value=\"$float\"\}.*\{number=\"63\",value=\"$float\"\},\{number=\"64\",value=\"$decimal\"\}.*\{number=\"71\",value=\"$decimal\"\},\{number=\"72\",value=\"$float\"\}.*\{number=\"87\",value=\"$float\"\}\\\]" \
"register values N"
mi_gdb_test "888-data-list-register-values r" \
- "888\\^done,register-values=\\\[\{number=\"0\",value=\"$hex\"\}.*\{number=\"71\",value=\"$hex\"\}\\\]" \
+ "888\\^done,register-values=\\\[\{number=\"0\",value=\"$hex\"\}.*\{number=\"87\",value=\"$hex\"\}\\\]" \
"register values r"
mi_gdb_test "999-data-list-register-names 68 69 70 71" \
- "999\\^done,register-names=\\\[\"pc\",\"npc\",\"fpsr\",\"cpsr\"\\\]" \
+ "999\\^done,register-names=\\\[\"pc\",\"npc\",\"fsr\",\"csr\"\\\]" \
"list names of some regs"
mi_gdb_test "001-data-list-register-values x 68 69 70 71" \