This is the mail archive of the
gdb-patches@sources.redhat.com
mailing list for the GDB project.
Re: [RFC] gdb.server testcases (resend)
Daniel,
The patches did not apply cleanly to mainline, so I had to hand patch the
files. Also, in the final link stage for gdbserver ld complained that:
/usr/bin/ld: warning: powerpc:common64 architecture of input file
`inferiors.o' is incompatible with powerpc:common output
so I had to add a -m64 to the linker call.
gdbserver still broken:.
$ ./gdbserver uranus.ltc.austin.ibm.com /tmp/server
Process /tmp/server created; pid = 4747
reading register 70: Input/output error
Exiting
Thanks
-----
manjo
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ Cogito ergo sum +
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
On Wed, 18 May 2005, Daniel Jacobowitz wrote:
> On Tue, May 17, 2005 at 11:39:27PM -0500, Manoj Iyer wrote:
> >
> >
> > Daniel,
> >
> > I misunderstood the use of gdb.server directory. I thought that this
> > directory is for testing gdbserver remote debugging functionality. I am
> > trying to get gdbserver working on ppc. As a starting point I used these
> > tests. But you are correct. In this perspective my testcases seem useless.
>
> Take a look 'round the list archives for the DejaGNU board file you'll
> need to run the entire testsuite using gdbserver. There are about a
> hundred failures I haven't really looked into yet, but enough tests
> pass to be useful.
>
> > To begin with gdbserver program fails outright on ppc64 PPC970 Altivec
> > hardware:
> >
> > ./gdbserver uranus.ltc.austin.ibm.com:1234 /tmp/server
> > Process /tmp/server created; pid = 30836
> > reading register 1: Input/output error
> > Exiting
> >
> > I am trying to chase down the problem and get gdbserver working. If you
> > have any insight into this problem please advice.
>
> Gdbserver does not have any configuration for ppc64. I have a ppc64
> port around here somewhere; I'll attach it to this message. Can you
> test it for me? I never submitted it because I had no way to test it.
>
> Just like the PPC port, it doesn't support NPTL; we can do that
> separately.
>
> --
> Daniel Jacobowitz
> CodeSourcery, LLC
>
> Index: src/gdb/configure.tgt
> ===================================================================
> RCS file: /cvs/src/src/gdb/configure.tgt,v
> retrieving revision 1.161
> diff -u -p -r1.161 configure.tgt
> --- src/gdb/configure.tgt 18 Mar 2005 18:59:17 -0000 1.161
> +++ src/gdb/configure.tgt 29 Mar 2005 16:33:20 -0000
> @@ -146,7 +146,9 @@ powerpc-*-aix*) gdb_target=aix ;;
> powerpc-*-linux*) gdb_target=linux
> build_gdbserver=yes
> ;;
> -powerpc64-*-linux*) gdb_target=linux ;;
> +powerpc64-*-linux*) gdb_target=linux
> + build_gdbserver=yes
> + ;;
> powerpc*-*-*) if test -f ../sim/ppc/Makefile; then
> gdb_target=ppc-sim
> else
> Index: src/gdb/gdbserver/Makefile.in
> ===================================================================
> RCS file: /cvs/src/src/gdb/gdbserver/Makefile.in,v
> retrieving revision 1.28
> diff -u -p -r1.28 Makefile.in
> --- src/gdb/gdbserver/Makefile.in 4 Mar 2005 18:16:25 -0000 1.28
> +++ src/gdb/gdbserver/Makefile.in 29 Mar 2005 16:33:21 -0000
> @@ -122,7 +122,8 @@ SFILES= $(srcdir)/gdbreplay.c $(srcdir)/
> $(srcdir)/i387-fp.c \
> $(srcdir)/linux-ia64-low.c $(srcdir)/linux-low.c \
> $(srcdir)/linux-m68k-low.c $(srcdir)/linux-mips-low.c \
> - $(srcdir)/linux-ppc-low.c $(srcdir)/linux-s390-low.c \
> + $(srcdir)/linux-ppc-low.c $(srcdir)/linux-ppc64-low.c \
> + $(srcdir)/linux-s390-low.c \
> $(srcdir)/linux-sh-low.c $(srcdir)/linux-x86-64-low.c
>
> DEPFILES = @GDBSERVER_DEPFILES@
> @@ -265,6 +266,7 @@ linux-i386-low.o: linux-i386-low.c $(lin
> linux-ia64-low.o: linux-ia64-low.c $(linux_low_h) $(server_h)
> linux-mips-low.o: linux-mips-low.c $(linux_low_h) $(server_h)
> linux-ppc-low.o: linux-ppc-low.c $(linux_low_h) $(server_h)
> +linux-ppc64-low.o: linux-ppc64-low.c $(linux_low_h) $(server_h)
> linux-s390-low.o: linux-s390-low.c $(linux_low_h) $(server_h)
> linux-sh-low.o: linux-sh-low.c $(linux_low_h) $(server_h)
> linux-x86-64-low.o: linux-x86-64-low.c $(linux_low_h) $(server_h)
> @@ -290,6 +292,9 @@ reg-mips.c : $(srcdir)/../regformats/reg
> reg-ppc.o : reg-ppc.c $(regdef_h)
> reg-ppc.c : $(srcdir)/../regformats/reg-ppc.dat $(regdat_sh)
> sh $(regdat_sh) $(srcdir)/../regformats/reg-ppc.dat reg-ppc.c
> +reg-ppc64.o : reg-ppc64.c $(regdef_h)
> +reg-ppc64.c : $(srcdir)/../regformats/reg-ppc64.dat $(regdat_sh)
> + sh $(regdat_sh) $(srcdir)/../regformats/reg-ppc64.dat reg-ppc64.c
> reg-s390.o : reg-s390.c $(regdef_h)
> reg-s390.c : $(srcdir)/../regformats/reg-s390.dat $(regdat_sh)
> sh $(regdat_sh) $(srcdir)/../regformats/reg-s390.dat reg-s390.c
> Index: src/gdb/gdbserver/configure.srv
> ===================================================================
> RCS file: /cvs/src/src/gdb/gdbserver/configure.srv,v
> retrieving revision 1.8
> diff -u -p -r1.8 configure.srv
> --- src/gdb/gdbserver/configure.srv 21 Nov 2004 03:09:39 -0000 1.8
> +++ src/gdb/gdbserver/configure.srv 29 Mar 2005 16:33:21 -0000
> @@ -44,7 +44,12 @@ case "${target}" in
> srv_linux_usrregs=yes
> srv_linux_thread_db=yes
> ;;
> - powerpc*-*-linux*) srv_regobj=reg-ppc.o
> + powerpc64-*-linux*) srv_regobj=reg-ppc64.o
> + srv_tgtobj="linux-low.o linux-ppc64-low.o"
> + srv_linux_usrregs=yes
> + srv_linux_thread_db=yes
> + ;;
> + powerpc-*-linux*) srv_regobj=reg-ppc.o
> srv_tgtobj="linux-low.o linux-ppc-low.o"
> srv_linux_usrregs=yes
> srv_linux_thread_db=yes
> Index: src/gdb/gdbserver/linux-ppc64-low.c
> ===================================================================
> RCS file: src/gdb/gdbserver/linux-ppc64-low.c
> diff -N src/gdb/gdbserver/linux-ppc64-low.c
> --- /dev/null 1 Jan 1970 00:00:00 -0000
> +++ src/gdb/gdbserver/linux-ppc64-low.c 29 Mar 2005 16:33:22 -0000
> @@ -0,0 +1,112 @@
> +/* GNU/Linux/PowerPC64 specific low level interface, for the remote server for
> + GDB.
> + Copyright 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2005
> + Free Software Foundation, Inc.
> +
> + This file is part of GDB.
> +
> + This program is free software; you can redistribute it and/or modify
> + it under the terms of the GNU General Public License as published by
> + the Free Software Foundation; either version 2 of the License, or
> + (at your option) any later version.
> +
> + This program is distributed in the hope that it will be useful,
> + but WITHOUT ANY WARRANTY; without even the implied warranty of
> + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + GNU General Public License for more details.
> +
> + You should have received a copy of the GNU General Public License
> + along with this program; if not, write to the Free Software
> + Foundation, Inc., 59 Temple Place - Suite 330,
> + Boston, MA 02111-1307, USA. */
> +
> +#include "server.h"
> +#include "linux-low.h"
> +
> +#include <asm/ptrace.h>
> +
> +#define ppc_num_regs 71
> +
> +/* Currently, don't check/send MQ. */
> +static int ppc_regmap[] =
> + {PT_R0 * 8, PT_R1 * 8, PT_R2 * 8, PT_R3 * 8,
> + PT_R4 * 8, PT_R5 * 8, PT_R6 * 8, PT_R7 * 8,
> + PT_R8 * 8, PT_R9 * 8, PT_R10 * 8, PT_R11 * 8,
> + PT_R12 * 8, PT_R13 * 8, PT_R14 * 8, PT_R15 * 8,
> + PT_R16 * 8, PT_R17 * 8, PT_R18 * 8, PT_R19 * 8,
> + PT_R20 * 8, PT_R21 * 8, PT_R22 * 8, PT_R23 * 8,
> + PT_R24 * 8, PT_R25 * 8, PT_R26 * 8, PT_R27 * 8,
> + PT_R28 * 8, PT_R29 * 8, PT_R30 * 8, PT_R31 * 8,
> + PT_FPR0*8, PT_FPR0*8 + 8, PT_FPR0*8+16, PT_FPR0*8+24,
> + PT_FPR0*8+32, PT_FPR0*8+40, PT_FPR0*8+48, PT_FPR0*8+56,
> + PT_FPR0*8+64, PT_FPR0*8+72, PT_FPR0*8+80, PT_FPR0*8+88,
> + PT_FPR0*8+96, PT_FPR0*8+104, PT_FPR0*8+112, PT_FPR0*8+120,
> + PT_FPR0*8+128, PT_FPR0*8+136, PT_FPR0*8+144, PT_FPR0*8+152,
> + PT_FPR0*8+160, PT_FPR0*8+168, PT_FPR0*8+176, PT_FPR0*8+184,
> + PT_FPR0*8+192, PT_FPR0*8+200, PT_FPR0*8+208, PT_FPR0*8+216,
> + PT_FPR0*8+224, PT_FPR0*8+232, PT_FPR0*8+240, PT_FPR0*8+248,
> + PT_NIP * 8, PT_MSR * 8, PT_CCR * 8, PT_LNK * 8,
> + PT_CTR * 8, PT_XER * 8, PT_FPSCR * 8, };
> +
> +static int
> +ppc_cannot_store_register (int regno)
> +{
> + return 0;
> +}
> +
> +static int
> +ppc_cannot_fetch_register (int regno)
> +{
> + return 0;
> +}
> +
> +static CORE_ADDR
> +ppc_get_pc (void)
> +{
> + unsigned long pc;
> +
> + collect_register_by_name ("pc", &pc);
> +printf ("Stop pc is 0x%lx\n", pc);
> + return (CORE_ADDR) pc;
> +}
> +
> +static void
> +ppc_set_pc (CORE_ADDR pc)
> +{
> + unsigned long newpc = pc;
> +
> + supply_register_by_name ("pc", &newpc);
> +}
> +
> +/* Correct in either endianness.
> + This instruction is "twge r2, r2", which GDB uses as a software
> + breakpoint. */
> +static const unsigned int ppc_breakpoint = 0x7d821008;
> +#define ppc_breakpoint_len 4
> +
> +static int
> +ppc_breakpoint_at (CORE_ADDR where)
> +{
> + unsigned int insn;
> +
> + (*the_target->read_memory) (where, (char *) &insn, 4);
> + if (insn == ppc_breakpoint)
> + return 1;
> + /* If necessary, recognize more trap instructions here. GDB only uses the
> + one. */
> + return 0;
> +}
> +
> +struct linux_target_ops the_low_target = {
> + ppc_num_regs,
> + ppc_regmap,
> + ppc_cannot_fetch_register,
> + ppc_cannot_store_register,
> + ppc_get_pc,
> + ppc_set_pc,
> + (const char *) &ppc_breakpoint,
> + ppc_breakpoint_len,
> + NULL,
> + 0,
> + ppc_breakpoint_at,
> +};
> Index: src/gdb/regformats/reg-ppc64.dat
> ===================================================================
> RCS file: src/gdb/regformats/reg-ppc64.dat
> diff -N src/gdb/regformats/reg-ppc64.dat
> --- /dev/null 1 Jan 1970 00:00:00 -0000
> +++ src/gdb/regformats/reg-ppc64.dat 29 Mar 2005 16:33:22 -0000
> @@ -0,0 +1,76 @@
> +name:ppc
> +expedite:r1,pc
> +64:r0
> +64:r1
> +64:r2
> +64:r3
> +64:r4
> +64:r5
> +64:r6
> +64:r7
> +64:r8
> +64:r9
> +64:r10
> +64:r11
> +64:r12
> +64:r13
> +64:r14
> +64:r15
> +64:r16
> +64:r17
> +64:r18
> +64:r19
> +64:r20
> +64:r21
> +64:r22
> +64:r23
> +64:r24
> +64:r25
> +64:r26
> +64:r27
> +64:r28
> +64:r29
> +64:r30
> +64:r31
> +
> +64:f0
> +64:f1
> +64:f2
> +64:f3
> +64:f4
> +64:f5
> +64:f6
> +64:f7
> +64:f8
> +64:f9
> +64:f10
> +64:f11
> +64:f12
> +64:f13
> +64:f14
> +64:f15
> +64:f16
> +64:f17
> +64:f18
> +64:f19
> +64:f20
> +64:f21
> +64:f22
> +64:f23
> +64:f24
> +64:f25
> +64:f26
> +64:f27
> +64:f28
> +64:f29
> +64:f30
> +64:f31
> +
> +64:pc
> +64:ps
> +
> +32:cr
> +64:lr
> +64:ctr
> +32:xer
> +32:fpscr
>