This is the mail archive of the
gdb-cvs@sourceware.org
mailing list for the GDB project.
[binutils-gdb] sim: allow the environment configure option everywhere
- From: Michael Frysinger <vapier at sourceware dot org>
- To: gdb-cvs at sourceware dot org
- Date: 10 Jan 2016 22:11:18 -0000
- Subject: [binutils-gdb] sim: allow the environment configure option everywhere
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=16f7876d71604f835aefe48f0bf230c028c05d99
commit 16f7876d71604f835aefe48f0bf230c028c05d99
Author: Mike Frysinger <vapier@gentoo.org>
Date: Sun Jan 10 16:52:25 2016 -0500
sim: allow the environment configure option everywhere
Currently ports have to call SIM_AC_OPTION_ENVIRONMENT explicitly in
order to make the configure flag available. There's no real reason
to not allow this flag for all ports, so move it to the common sim
macro. This way we get standard behavior across all ports too.
Diff:
---
sim/aarch64/ChangeLog | 5 +++++
sim/aarch64/configure | 44 ++++++++++++++++++++++----------------------
sim/aarch64/configure.ac | 1 -
sim/arm/ChangeLog | 5 +++++
sim/arm/configure | 44 ++++++++++++++++++++++----------------------
sim/arm/configure.ac | 1 -
sim/avr/ChangeLog | 5 +++++
sim/avr/configure | 44 ++++++++++++++++++++++----------------------
sim/avr/configure.ac | 1 -
sim/bfin/ChangeLog | 5 +++++
sim/bfin/configure | 44 ++++++++++++++++++++++----------------------
sim/bfin/configure.ac | 1 -
sim/common/ChangeLog | 4 ++++
sim/common/acinclude.m4 | 1 +
sim/cr16/ChangeLog | 5 +++++
sim/cr16/configure | 44 ++++++++++++++++++++++----------------------
sim/cr16/configure.ac | 1 -
sim/cris/ChangeLog | 5 +++++
sim/cris/configure | 44 ++++++++++++++++++++++----------------------
sim/cris/configure.ac | 1 -
sim/d10v/ChangeLog | 5 +++++
sim/d10v/configure | 44 ++++++++++++++++++++++----------------------
sim/d10v/configure.ac | 1 -
sim/erc32/ChangeLog | 4 ++++
sim/erc32/configure | 26 ++++++++++++++++++++++++--
sim/frv/ChangeLog | 5 +++++
sim/frv/configure | 44 ++++++++++++++++++++++----------------------
sim/frv/configure.ac | 1 -
sim/ft32/ChangeLog | 5 +++++
sim/ft32/configure | 44 ++++++++++++++++++++++----------------------
sim/ft32/configure.ac | 1 -
sim/h8300/ChangeLog | 4 ++++
sim/h8300/configure | 26 ++++++++++++++++++++++++--
sim/iq2000/ChangeLog | 5 +++++
sim/iq2000/configure | 44 ++++++++++++++++++++++----------------------
sim/iq2000/configure.ac | 1 -
sim/lm32/ChangeLog | 5 +++++
sim/lm32/configure | 44 ++++++++++++++++++++++----------------------
sim/lm32/configure.ac | 1 -
sim/m32c/ChangeLog | 4 ++++
sim/m32c/configure | 26 ++++++++++++++++++++++++--
sim/m32r/ChangeLog | 5 +++++
sim/m32r/configure | 44 ++++++++++++++++++++++----------------------
sim/m32r/configure.ac | 1 -
sim/m68hc11/ChangeLog | 4 ++++
sim/m68hc11/configure | 26 ++++++++++++++++++++++++--
sim/mcore/ChangeLog | 5 +++++
sim/mcore/configure | 44 ++++++++++++++++++++++----------------------
sim/mcore/configure.ac | 1 -
sim/microblaze/ChangeLog | 5 +++++
sim/microblaze/configure | 44 ++++++++++++++++++++++----------------------
sim/microblaze/configure.ac | 1 -
sim/mips/ChangeLog | 4 ++++
sim/mips/configure | 26 ++++++++++++++++++++++++--
sim/mn10300/ChangeLog | 4 ++++
sim/mn10300/configure | 26 ++++++++++++++++++++++++--
sim/moxie/ChangeLog | 5 +++++
sim/moxie/configure | 44 ++++++++++++++++++++++----------------------
sim/moxie/configure.ac | 1 -
sim/msp430/ChangeLog | 4 ++++
sim/msp430/configure | 26 ++++++++++++++++++++++++--
sim/rl78/ChangeLog | 4 ++++
sim/rl78/configure | 26 ++++++++++++++++++++++++--
sim/rx/ChangeLog | 4 ++++
sim/rx/configure | 26 ++++++++++++++++++++++++--
sim/sh/ChangeLog | 5 +++++
sim/sh/configure | 44 ++++++++++++++++++++++----------------------
sim/sh/configure.ac | 1 -
sim/sh64/ChangeLog | 5 +++++
sim/sh64/configure | 44 ++++++++++++++++++++++----------------------
sim/sh64/configure.ac | 1 -
sim/v850/ChangeLog | 4 ++++
sim/v850/configure | 26 ++++++++++++++++++++++++--
73 files changed, 744 insertions(+), 411 deletions(-)
diff --git a/sim/aarch64/ChangeLog b/sim/aarch64/ChangeLog
index 3e9826b..609a72c 100644
--- a/sim/aarch64/ChangeLog
+++ b/sim/aarch64/ChangeLog
@@ -1,5 +1,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/aarch64/configure b/sim/aarch64/configure
index 74358fd..72255f8 100755
--- a/sim/aarch64/configure
+++ b/sim/aarch64/configure
@@ -753,12 +753,12 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
enable_sim_endian
enable_sim_alignment
-enable_sim_environment
enable_werror
enable_build_warnings
enable_sim_build_warnings
@@ -1406,6 +1406,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -1413,9 +1416,6 @@ Optional Features:
--enable-sim-alignment=align
Specify strict, nonstrict or forced alignment of
memory accesses
- --enable-sim-environment=environment
- Specify mixed, user, virtual or operating
- environment
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
@@ -13323,6 +13323,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
@@ -13543,24 +13561,6 @@ fi
fi
-# Check whether --enable-sim-environment was given.
-if test "${enable_sim_environment+set}" = set; then :
- enableval=$enable_sim_environment; case "${enableval}" in
- all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
- user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
- virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
- operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
- sim_environment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
- echo "Setting sim environment = $sim_environment" 6>&1
-fi
-else
- sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
-fi
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
diff --git a/sim/aarch64/configure.ac b/sim/aarch64/configure.ac
index c6e3256..5536343 100644
--- a/sim/aarch64/configure.ac
+++ b/sim/aarch64/configure.ac
@@ -31,7 +31,6 @@ SIM_AC_OPTION_ENDIAN
## common core does not support this, so we opt for non-strict
## alignment instead.
SIM_AC_OPTION_ALIGNMENT(NONSTRICT_ALIGNMENT,NONSTRICT_ALIGNMENT)
-SIM_AC_OPTION_ENVIRONMENT
SIM_AC_OPTION_WARNINGS
SIM_AC_OUTPUT
diff --git a/sim/arm/ChangeLog b/sim/arm/ChangeLog
index 7220500..36dcc11 100644
--- a/sim/arm/ChangeLog
+++ b/sim/arm/ChangeLog
@@ -1,5 +1,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/arm/configure b/sim/arm/configure
index cf8a451..b4e6c82 100755
--- a/sim/arm/configure
+++ b/sim/arm/configure
@@ -753,12 +753,12 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
enable_sim_endian
enable_sim_alignment
-enable_sim_environment
enable_werror
enable_build_warnings
enable_sim_build_warnings
@@ -1406,6 +1406,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -1413,9 +1416,6 @@ Optional Features:
--enable-sim-alignment=align
Specify strict, nonstrict or forced alignment of
memory accesses
- --enable-sim-environment=environment
- Specify mixed, user, virtual or operating
- environment
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
@@ -13323,6 +13323,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
@@ -13539,24 +13557,6 @@ fi
fi
-# Check whether --enable-sim-environment was given.
-if test "${enable_sim_environment+set}" = set; then :
- enableval=$enable_sim_environment; case "${enableval}" in
- all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
- user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
- virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
- operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
- sim_environment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
- echo "Setting sim environment = $sim_environment" 6>&1
-fi
-else
- sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
-fi
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
diff --git a/sim/arm/configure.ac b/sim/arm/configure.ac
index 6d5622e..a93418f 100644
--- a/sim/arm/configure.ac
+++ b/sim/arm/configure.ac
@@ -7,7 +7,6 @@ SIM_AC_COMMON
SIM_AC_OPTION_ENDIAN
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT,STRICT_ALIGNMENT)
-SIM_AC_OPTION_ENVIRONMENT
SIM_AC_OPTION_WARNINGS
SIM_AC_OUTPUT
diff --git a/sim/avr/ChangeLog b/sim/avr/ChangeLog
index 3ba38f3..df93df5 100644
--- a/sim/avr/ChangeLog
+++ b/sim/avr/ChangeLog
@@ -1,5 +1,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/avr/configure b/sim/avr/configure
index eda7aab..b43b3ed 100755
--- a/sim/avr/configure
+++ b/sim/avr/configure
@@ -753,12 +753,12 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
enable_sim_endian
enable_sim_alignment
-enable_sim_environment
enable_werror
enable_build_warnings
enable_sim_build_warnings
@@ -1406,6 +1406,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -1413,9 +1416,6 @@ Optional Features:
--enable-sim-alignment=align
Specify strict, nonstrict or forced alignment of
memory accesses
- --enable-sim-environment=environment
- Specify mixed, user, virtual or operating
- environment
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
@@ -13323,6 +13323,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
@@ -13539,24 +13557,6 @@ fi
fi
-# Check whether --enable-sim-environment was given.
-if test "${enable_sim_environment+set}" = set; then :
- enableval=$enable_sim_environment; case "${enableval}" in
- all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
- user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
- virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
- operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
- sim_environment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
- echo "Setting sim environment = $sim_environment" 6>&1
-fi
-else
- sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
-fi
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
diff --git a/sim/avr/configure.ac b/sim/avr/configure.ac
index 184ccb5..54ac06f 100644
--- a/sim/avr/configure.ac
+++ b/sim/avr/configure.ac
@@ -7,7 +7,6 @@ SIM_AC_COMMON
SIM_AC_OPTION_ENDIAN(LITTLE)
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT,STRICT_ALIGNMENT)
-SIM_AC_OPTION_ENVIRONMENT
SIM_AC_OPTION_WARNINGS
SIM_AC_OUTPUT
diff --git a/sim/bfin/ChangeLog b/sim/bfin/ChangeLog
index ef177ad..c41b989 100644
--- a/sim/bfin/ChangeLog
+++ b/sim/bfin/ChangeLog
@@ -1,5 +1,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/bfin/configure b/sim/bfin/configure
index 09a8e3a..bfdb362 100755
--- a/sim/bfin/configure
+++ b/sim/bfin/configure
@@ -758,13 +758,13 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
enable_sim_endian
enable_sim_alignment
enable_sim_default_model
-enable_sim_environment
enable_werror
enable_build_warnings
enable_sim_build_warnings
@@ -1418,6 +1418,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -1427,9 +1430,6 @@ Optional Features:
memory accesses
--enable-sim-default-model=model
Specify default model to simulate
- --enable-sim-environment=environment
- Specify mixed, user, virtual or operating
- environment
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
@@ -13346,6 +13346,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
@@ -13578,24 +13596,6 @@ fi
-# Check whether --enable-sim-environment was given.
-if test "${enable_sim_environment+set}" = set; then :
- enableval=$enable_sim_environment; case "${enableval}" in
- all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
- user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
- virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
- operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
- sim_environment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
- echo "Setting sim environment = $sim_environment" 6>&1
-fi
-else
- sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
-fi
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
diff --git a/sim/bfin/configure.ac b/sim/bfin/configure.ac
index 711cae4..5b8a4c2 100644
--- a/sim/bfin/configure.ac
+++ b/sim/bfin/configure.ac
@@ -8,7 +8,6 @@ SIM_AC_COMMON
SIM_AC_OPTION_ENDIAN(LITTLE)
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT,STRICT_ALIGNMENT)
SIM_AC_OPTION_DEFAULT_MODEL(bf537)
-SIM_AC_OPTION_ENVIRONMENT
SIM_AC_OPTION_WARNINGS
SIM_AC_OPTION_HARDWARE(yes,,\
bfin_cec \
diff --git a/sim/common/ChangeLog b/sim/common/ChangeLog
index ae03459..fee3dee 100644
--- a/sim/common/ChangeLog
+++ b/sim/common/ChangeLog
@@ -1,5 +1,9 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * acinclude.m4 (SIM_AC_COMMON): Call SIM_AC_OPTION_ENVIRONMENT.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* acinclude.m4 (SIM_AC_COMMON): Call SIM_AC_OPTION_ASSERT.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/common/acinclude.m4 b/sim/common/acinclude.m4
index 675c595..9b62bcd 100644
--- a/sim/common/acinclude.m4
+++ b/sim/common/acinclude.m4
@@ -224,6 +224,7 @@ fi],[sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1"])dnl
AC_SUBST(sim_profile)
SIM_AC_OPTION_ASSERT
+SIM_AC_OPTION_ENVIRONMENT
SIM_AC_OPTION_INLINE
ACX_PKGVERSION([SIM])
diff --git a/sim/cr16/ChangeLog b/sim/cr16/ChangeLog
index bd7fb2a..1e50f15 100644
--- a/sim/cr16/ChangeLog
+++ b/sim/cr16/ChangeLog
@@ -1,5 +1,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/cr16/configure b/sim/cr16/configure
index 1d02641..9c62b97 100755
--- a/sim/cr16/configure
+++ b/sim/cr16/configure
@@ -753,12 +753,12 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
enable_sim_endian
enable_sim_alignment
-enable_sim_environment
enable_werror
enable_build_warnings
enable_sim_build_warnings
@@ -1406,6 +1406,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -1413,9 +1416,6 @@ Optional Features:
--enable-sim-alignment=align
Specify strict, nonstrict or forced alignment of
memory accesses
- --enable-sim-environment=environment
- Specify mixed, user, virtual or operating
- environment
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
@@ -13323,6 +13323,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
@@ -13539,24 +13557,6 @@ fi
fi
-# Check whether --enable-sim-environment was given.
-if test "${enable_sim_environment+set}" = set; then :
- enableval=$enable_sim_environment; case "${enableval}" in
- all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
- user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
- virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
- operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
- sim_environment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
- echo "Setting sim environment = $sim_environment" 6>&1
-fi
-else
- sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
-fi
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
diff --git a/sim/cr16/configure.ac b/sim/cr16/configure.ac
index 8ce247d..b85b17d 100644
--- a/sim/cr16/configure.ac
+++ b/sim/cr16/configure.ac
@@ -7,7 +7,6 @@ SIM_AC_COMMON
SIM_AC_OPTION_ENDIAN(LITTLE)
SIM_AC_OPTION_ALIGNMENT(NONSTRICT_ALIGNMENT)
-SIM_AC_OPTION_ENVIRONMENT
SIM_AC_OPTION_WARNINGS
SIM_AC_OUTPUT
diff --git a/sim/cris/ChangeLog b/sim/cris/ChangeLog
index 2583d8b..e3f4b6d 100644
--- a/sim/cris/ChangeLog
+++ b/sim/cris/ChangeLog
@@ -1,5 +1,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/cris/configure b/sim/cris/configure
index 7b5d765..e63e0f6 100755
--- a/sim/cris/configure
+++ b/sim/cris/configure
@@ -756,6 +756,7 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
@@ -767,7 +768,6 @@ enable_build_warnings
enable_sim_build_warnings
enable_sim_hardware
enable_sim_default_model
-enable_sim_environment
enable_cgen_maint
'
ac_precious_vars='build_alias
@@ -1413,6 +1413,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -1431,9 +1434,6 @@ Optional Features:
Specify the hardware to be included in the build.
--enable-sim-default-model=model
Specify default model to simulate
- --enable-sim-environment=environment
- Specify mixed, user, virtual or operating
- environment
--enable-cgen-maint=DIR build cgen generated files
Optional Packages:
@@ -13337,6 +13337,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
@@ -13815,24 +13833,6 @@ fi
-# Check whether --enable-sim-environment was given.
-if test "${enable_sim_environment+set}" = set; then :
- enableval=$enable_sim_environment; case "${enableval}" in
- all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
- user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
- virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
- operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
- sim_environment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
- echo "Setting sim environment = $sim_environment" 6>&1
-fi
-else
- sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
-fi
-
-
cgen_maint=no
cgen=guile
cgendir='$(srcdir)/../../cgen'
diff --git a/sim/cris/configure.ac b/sim/cris/configure.ac
index 4e9455a..beae702 100644
--- a/sim/cris/configure.ac
+++ b/sim/cris/configure.ac
@@ -16,7 +16,6 @@ SIM_AC_OPTION_HARDWARE(yes,,rv cris cris_900000xx)
# The default model shouldn't matter as long as there's a BFD.
SIM_AC_OPTION_DEFAULT_MODEL(crisv32)
-SIM_AC_OPTION_ENVIRONMENT
SIM_AC_OPTION_CGEN_MAINT
SIM_AC_OUTPUT
diff --git a/sim/d10v/ChangeLog b/sim/d10v/ChangeLog
index 20cde46..1a89f9e 100644
--- a/sim/d10v/ChangeLog
+++ b/sim/d10v/ChangeLog
@@ -1,5 +1,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/d10v/configure b/sim/d10v/configure
index cf8a451..b4e6c82 100755
--- a/sim/d10v/configure
+++ b/sim/d10v/configure
@@ -753,12 +753,12 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
enable_sim_endian
enable_sim_alignment
-enable_sim_environment
enable_werror
enable_build_warnings
enable_sim_build_warnings
@@ -1406,6 +1406,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -1413,9 +1416,6 @@ Optional Features:
--enable-sim-alignment=align
Specify strict, nonstrict or forced alignment of
memory accesses
- --enable-sim-environment=environment
- Specify mixed, user, virtual or operating
- environment
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
@@ -13323,6 +13323,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
@@ -13539,24 +13557,6 @@ fi
fi
-# Check whether --enable-sim-environment was given.
-if test "${enable_sim_environment+set}" = set; then :
- enableval=$enable_sim_environment; case "${enableval}" in
- all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
- user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
- virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
- operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
- sim_environment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
- echo "Setting sim environment = $sim_environment" 6>&1
-fi
-else
- sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
-fi
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
diff --git a/sim/d10v/configure.ac b/sim/d10v/configure.ac
index 6d5622e..a93418f 100644
--- a/sim/d10v/configure.ac
+++ b/sim/d10v/configure.ac
@@ -7,7 +7,6 @@ SIM_AC_COMMON
SIM_AC_OPTION_ENDIAN
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT,STRICT_ALIGNMENT)
-SIM_AC_OPTION_ENVIRONMENT
SIM_AC_OPTION_WARNINGS
SIM_AC_OUTPUT
diff --git a/sim/erc32/ChangeLog b/sim/erc32/ChangeLog
index 2ff4bcc..2a3a34a 100644
--- a/sim/erc32/ChangeLog
+++ b/sim/erc32/ChangeLog
@@ -18,6 +18,10 @@
* configure: Regenerate.
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-09 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
diff --git a/sim/erc32/configure b/sim/erc32/configure
index 857e093..962bd07 100755
--- a/sim/erc32/configure
+++ b/sim/erc32/configure
@@ -755,6 +755,7 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
@@ -1402,6 +1403,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
@@ -12831,7 +12835,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12834 "configure"
+#line 12838 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12937,7 +12941,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12940 "configure"
+#line 12944 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13306,6 +13310,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
diff --git a/sim/frv/ChangeLog b/sim/frv/ChangeLog
index 7be18a3..b6c8ac1 100644
--- a/sim/frv/ChangeLog
+++ b/sim/frv/ChangeLog
@@ -1,5 +1,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/frv/configure b/sim/frv/configure
index 7d1726f..d9dc957 100755
--- a/sim/frv/configure
+++ b/sim/frv/configure
@@ -757,6 +757,7 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
@@ -764,7 +765,6 @@ enable_sim_endian
enable_sim_alignment
enable_sim_scache
enable_sim_default_model
-enable_sim_environment
enable_cgen_maint
enable_sim_trapdump
enable_sim_hardware
@@ -1412,6 +1412,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -1423,9 +1426,6 @@ Optional Features:
Specify simulator execution cache size
--enable-sim-default-model=model
Specify default model to simulate
- --enable-sim-environment=environment
- Specify mixed, user, virtual or operating
- environment
--enable-cgen-maint=DIR build cgen generated files
--enable-sim-trapdump Make unknown traps dump the registers
--enable-sim-hardware=LIST
@@ -13332,6 +13332,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
@@ -13583,24 +13601,6 @@ fi
-# Check whether --enable-sim-environment was given.
-if test "${enable_sim_environment+set}" = set; then :
- enableval=$enable_sim_environment; case "${enableval}" in
- all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
- user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
- virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
- operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
- sim_environment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
- echo "Setting sim environment = $sim_environment" 6>&1
-fi
-else
- sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
-fi
-
-
cgen_maint=no
cgen=guile
cgendir='$(srcdir)/../../cgen'
diff --git a/sim/frv/configure.ac b/sim/frv/configure.ac
index bb5f459..cfbe29a 100644
--- a/sim/frv/configure.ac
+++ b/sim/frv/configure.ac
@@ -9,7 +9,6 @@ SIM_AC_OPTION_ENDIAN(BIG)
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT)
SIM_AC_OPTION_SCACHE(16384)
SIM_AC_OPTION_DEFAULT_MODEL(fr500)
-SIM_AC_OPTION_ENVIRONMENT
SIM_AC_OPTION_CGEN_MAINT
#
diff --git a/sim/ft32/ChangeLog b/sim/ft32/ChangeLog
index 9d9fde5..6ec12cb 100644
--- a/sim/ft32/ChangeLog
+++ b/sim/ft32/ChangeLog
@@ -1,5 +1,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/ft32/configure b/sim/ft32/configure
index 5d4ebc4..c01c48e 100755
--- a/sim/ft32/configure
+++ b/sim/ft32/configure
@@ -753,12 +753,12 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
enable_sim_endian
enable_sim_alignment
-enable_sim_environment
enable_werror
enable_build_warnings
enable_sim_build_warnings
@@ -1406,6 +1406,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -1413,9 +1416,6 @@ Optional Features:
--enable-sim-alignment=align
Specify strict, nonstrict or forced alignment of
memory accesses
- --enable-sim-environment=environment
- Specify mixed, user, virtual or operating
- environment
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
@@ -13323,6 +13323,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
@@ -13539,24 +13557,6 @@ fi
fi
-# Check whether --enable-sim-environment was given.
-if test "${enable_sim_environment+set}" = set; then :
- enableval=$enable_sim_environment; case "${enableval}" in
- all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
- user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
- virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
- operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
- sim_environment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
- echo "Setting sim environment = $sim_environment" 6>&1
-fi
-else
- sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
-fi
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
diff --git a/sim/ft32/configure.ac b/sim/ft32/configure.ac
index 8aadb5f..279b661 100644
--- a/sim/ft32/configure.ac
+++ b/sim/ft32/configure.ac
@@ -7,7 +7,6 @@ SIM_AC_COMMON
SIM_AC_OPTION_ENDIAN(LITTLE)
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT)
-SIM_AC_OPTION_ENVIRONMENT
SIM_AC_OPTION_WARNINGS
SIM_AC_OUTPUT
diff --git a/sim/h8300/ChangeLog b/sim/h8300/ChangeLog
index fa83702..a29bad6 100644
--- a/sim/h8300/ChangeLog
+++ b/sim/h8300/ChangeLog
@@ -18,6 +18,10 @@
* configure: Regenerate.
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-09 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
diff --git a/sim/h8300/configure b/sim/h8300/configure
index 8536049..b4d3b8b 100755
--- a/sim/h8300/configure
+++ b/sim/h8300/configure
@@ -753,6 +753,7 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
@@ -1402,6 +1403,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -12836,7 +12840,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12839 "configure"
+#line 12843 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12942,7 +12946,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12945 "configure"
+#line 12949 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13311,6 +13315,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
diff --git a/sim/iq2000/ChangeLog b/sim/iq2000/ChangeLog
index f3872a0..9440f74 100644
--- a/sim/iq2000/ChangeLog
+++ b/sim/iq2000/ChangeLog
@@ -1,5 +1,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/iq2000/configure b/sim/iq2000/configure
index a4b398d..6cf83e7 100755
--- a/sim/iq2000/configure
+++ b/sim/iq2000/configure
@@ -756,6 +756,7 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
@@ -763,7 +764,6 @@ enable_sim_endian
enable_sim_alignment
enable_sim_scache
enable_sim_default_model
-enable_sim_environment
enable_cgen_maint
enable_sim_hardware
'
@@ -1410,6 +1410,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -1421,9 +1424,6 @@ Optional Features:
Specify simulator execution cache size
--enable-sim-default-model=model
Specify default model to simulate
- --enable-sim-environment=environment
- Specify mixed, user, virtual or operating
- environment
--enable-cgen-maint=DIR build cgen generated files
--enable-sim-hardware=LIST
Specify the hardware to be included in the build.
@@ -13329,6 +13329,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
@@ -13580,24 +13598,6 @@ fi
-# Check whether --enable-sim-environment was given.
-if test "${enable_sim_environment+set}" = set; then :
- enableval=$enable_sim_environment; case "${enableval}" in
- all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
- user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
- virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
- operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
- sim_environment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
- echo "Setting sim environment = $sim_environment" 6>&1
-fi
-else
- sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
-fi
-
-
cgen_maint=no
cgen=guile
cgendir='$(srcdir)/../../cgen'
diff --git a/sim/iq2000/configure.ac b/sim/iq2000/configure.ac
index 0d6b116..7424e4d 100644
--- a/sim/iq2000/configure.ac
+++ b/sim/iq2000/configure.ac
@@ -9,7 +9,6 @@ SIM_AC_OPTION_ENDIAN(BIG)
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT)
SIM_AC_OPTION_SCACHE(16384)
SIM_AC_OPTION_DEFAULT_MODEL(iq2000)
-SIM_AC_OPTION_ENVIRONMENT
SIM_AC_OPTION_CGEN_MAINT
SIM_AC_OPTION_HARDWARE(yes,"","")
diff --git a/sim/lm32/ChangeLog b/sim/lm32/ChangeLog
index 3086517..e427101 100644
--- a/sim/lm32/ChangeLog
+++ b/sim/lm32/ChangeLog
@@ -1,5 +1,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/lm32/configure b/sim/lm32/configure
index 7838a83..d40a491 100755
--- a/sim/lm32/configure
+++ b/sim/lm32/configure
@@ -756,6 +756,7 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
@@ -763,7 +764,6 @@ enable_sim_endian
enable_sim_alignment
enable_sim_scache
enable_sim_default_model
-enable_sim_environment
enable_cgen_maint
enable_sim_hardware
'
@@ -1410,6 +1410,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -1421,9 +1424,6 @@ Optional Features:
Specify simulator execution cache size
--enable-sim-default-model=model
Specify default model to simulate
- --enable-sim-environment=environment
- Specify mixed, user, virtual or operating
- environment
--enable-cgen-maint=DIR build cgen generated files
--enable-sim-hardware=LIST
Specify the hardware to be included in the build.
@@ -13329,6 +13329,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
@@ -13580,24 +13598,6 @@ fi
-# Check whether --enable-sim-environment was given.
-if test "${enable_sim_environment+set}" = set; then :
- enableval=$enable_sim_environment; case "${enableval}" in
- all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
- user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
- virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
- operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
- sim_environment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
- echo "Setting sim environment = $sim_environment" 6>&1
-fi
-else
- sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
-fi
-
-
cgen_maint=no
cgen=guile
cgendir='$(srcdir)/../../cgen'
diff --git a/sim/lm32/configure.ac b/sim/lm32/configure.ac
index a162f29..e928885 100644
--- a/sim/lm32/configure.ac
+++ b/sim/lm32/configure.ac
@@ -9,7 +9,6 @@ SIM_AC_OPTION_ENDIAN(BIG)
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT,STRICT_ALIGNMENT)
SIM_AC_OPTION_SCACHE(16384)
SIM_AC_OPTION_DEFAULT_MODEL(lm32)
-SIM_AC_OPTION_ENVIRONMENT
SIM_AC_OPTION_CGEN_MAINT
SIM_AC_OPTION_HARDWARE(yes,,lm32cpu lm32timer lm32uart)
diff --git a/sim/m32c/ChangeLog b/sim/m32c/ChangeLog
index 0f50701..db383c9 100644
--- a/sim/m32c/ChangeLog
+++ b/sim/m32c/ChangeLog
@@ -18,6 +18,10 @@
* configure: Regenerate.
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-09 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
diff --git a/sim/m32c/configure b/sim/m32c/configure
index 77515c2..b0c2bb2 100755
--- a/sim/m32c/configure
+++ b/sim/m32c/configure
@@ -753,6 +753,7 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
@@ -1403,6 +1404,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-werror treat compile warnings as errors
@@ -12837,7 +12841,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12840 "configure"
+#line 12844 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12943,7 +12947,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12946 "configure"
+#line 12950 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13312,6 +13316,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
diff --git a/sim/m32r/ChangeLog b/sim/m32r/ChangeLog
index 1bc70e1..d33c5fe 100644
--- a/sim/m32r/ChangeLog
+++ b/sim/m32r/ChangeLog
@@ -1,5 +1,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/m32r/configure b/sim/m32r/configure
index 492d3af..49f33f4 100755
--- a/sim/m32r/configure
+++ b/sim/m32r/configure
@@ -758,6 +758,7 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
@@ -765,7 +766,6 @@ enable_sim_endian
enable_sim_alignment
enable_sim_scache
enable_sim_default_model
-enable_sim_environment
enable_cgen_maint
enable_sim_hardware
'
@@ -1412,6 +1412,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -1423,9 +1426,6 @@ Optional Features:
Specify simulator execution cache size
--enable-sim-default-model=model
Specify default model to simulate
- --enable-sim-environment=environment
- Specify mixed, user, virtual or operating
- environment
--enable-cgen-maint=DIR build cgen generated files
--enable-sim-hardware=LIST
Specify the hardware to be included in the build.
@@ -13331,6 +13331,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
@@ -13582,24 +13600,6 @@ fi
-# Check whether --enable-sim-environment was given.
-if test "${enable_sim_environment+set}" = set; then :
- enableval=$enable_sim_environment; case "${enableval}" in
- all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
- user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
- virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
- operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
- sim_environment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
- echo "Setting sim environment = $sim_environment" 6>&1
-fi
-else
- sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
-fi
-
-
cgen_maint=no
cgen=guile
cgendir='$(srcdir)/../../cgen'
diff --git a/sim/m32r/configure.ac b/sim/m32r/configure.ac
index 4395020..d9c7d62 100644
--- a/sim/m32r/configure.ac
+++ b/sim/m32r/configure.ac
@@ -9,7 +9,6 @@ SIM_AC_OPTION_ENDIAN(BIG)
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT)
SIM_AC_OPTION_SCACHE(16384)
SIM_AC_OPTION_DEFAULT_MODEL(m32r/d)
-SIM_AC_OPTION_ENVIRONMENT
SIM_AC_OPTION_CGEN_MAINT
case "${target_alias}" in
diff --git a/sim/m68hc11/ChangeLog b/sim/m68hc11/ChangeLog
index 3c71597..b9b16a9 100644
--- a/sim/m68hc11/ChangeLog
+++ b/sim/m68hc11/ChangeLog
@@ -8,6 +8,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure.ac (SIM_AC_OPTION_INLINE): Delete call.
* configure: Regenerate.
diff --git a/sim/m68hc11/configure b/sim/m68hc11/configure
index d0328fe..22a65eb 100755
--- a/sim/m68hc11/configure
+++ b/sim/m68hc11/configure
@@ -753,6 +753,7 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
@@ -1406,6 +1407,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -12847,7 +12851,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12850 "configure"
+#line 12854 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12953,7 +12957,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12956 "configure"
+#line 12960 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13322,6 +13326,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
diff --git a/sim/mcore/ChangeLog b/sim/mcore/ChangeLog
index 87a759a..d93f895 100644
--- a/sim/mcore/ChangeLog
+++ b/sim/mcore/ChangeLog
@@ -1,5 +1,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/mcore/configure b/sim/mcore/configure
index cf8a451..b4e6c82 100755
--- a/sim/mcore/configure
+++ b/sim/mcore/configure
@@ -753,12 +753,12 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
enable_sim_endian
enable_sim_alignment
-enable_sim_environment
enable_werror
enable_build_warnings
enable_sim_build_warnings
@@ -1406,6 +1406,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -1413,9 +1416,6 @@ Optional Features:
--enable-sim-alignment=align
Specify strict, nonstrict or forced alignment of
memory accesses
- --enable-sim-environment=environment
- Specify mixed, user, virtual or operating
- environment
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
@@ -13323,6 +13323,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
@@ -13539,24 +13557,6 @@ fi
fi
-# Check whether --enable-sim-environment was given.
-if test "${enable_sim_environment+set}" = set; then :
- enableval=$enable_sim_environment; case "${enableval}" in
- all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
- user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
- virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
- operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
- sim_environment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
- echo "Setting sim environment = $sim_environment" 6>&1
-fi
-else
- sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
-fi
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
diff --git a/sim/mcore/configure.ac b/sim/mcore/configure.ac
index 6d5622e..a93418f 100644
--- a/sim/mcore/configure.ac
+++ b/sim/mcore/configure.ac
@@ -7,7 +7,6 @@ SIM_AC_COMMON
SIM_AC_OPTION_ENDIAN
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT,STRICT_ALIGNMENT)
-SIM_AC_OPTION_ENVIRONMENT
SIM_AC_OPTION_WARNINGS
SIM_AC_OUTPUT
diff --git a/sim/microblaze/ChangeLog b/sim/microblaze/ChangeLog
index f9c6ad4..4af462b 100644
--- a/sim/microblaze/ChangeLog
+++ b/sim/microblaze/ChangeLog
@@ -1,5 +1,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/microblaze/configure b/sim/microblaze/configure
index cf8a451..b4e6c82 100755
--- a/sim/microblaze/configure
+++ b/sim/microblaze/configure
@@ -753,12 +753,12 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
enable_sim_endian
enable_sim_alignment
-enable_sim_environment
enable_werror
enable_build_warnings
enable_sim_build_warnings
@@ -1406,6 +1406,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -1413,9 +1416,6 @@ Optional Features:
--enable-sim-alignment=align
Specify strict, nonstrict or forced alignment of
memory accesses
- --enable-sim-environment=environment
- Specify mixed, user, virtual or operating
- environment
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
@@ -13323,6 +13323,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
@@ -13539,24 +13557,6 @@ fi
fi
-# Check whether --enable-sim-environment was given.
-if test "${enable_sim_environment+set}" = set; then :
- enableval=$enable_sim_environment; case "${enableval}" in
- all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
- user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
- virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
- operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
- sim_environment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
- echo "Setting sim environment = $sim_environment" 6>&1
-fi
-else
- sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
-fi
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
diff --git a/sim/microblaze/configure.ac b/sim/microblaze/configure.ac
index 6d5622e..a93418f 100644
--- a/sim/microblaze/configure.ac
+++ b/sim/microblaze/configure.ac
@@ -7,7 +7,6 @@ SIM_AC_COMMON
SIM_AC_OPTION_ENDIAN
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT,STRICT_ALIGNMENT)
-SIM_AC_OPTION_ENVIRONMENT
SIM_AC_OPTION_WARNINGS
SIM_AC_OUTPUT
diff --git a/sim/mips/ChangeLog b/sim/mips/ChangeLog
index 2de22d1..0cfc8d5 100644
--- a/sim/mips/ChangeLog
+++ b/sim/mips/ChangeLog
@@ -8,6 +8,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure.ac (SIM_AC_OPTION_SMP): Delete call.
* configure: Regenerate.
diff --git a/sim/mips/configure b/sim/mips/configure
index 3e792d2..9fa2866 100755
--- a/sim/mips/configure
+++ b/sim/mips/configure
@@ -766,6 +766,7 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
@@ -1428,6 +1429,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-alignment=align
@@ -12877,7 +12881,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12880 "configure"
+#line 12884 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12983,7 +12987,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12986 "configure"
+#line 12990 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13352,6 +13356,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
diff --git a/sim/mn10300/ChangeLog b/sim/mn10300/ChangeLog
index f8c3892..bd37aef 100644
--- a/sim/mn10300/ChangeLog
+++ b/sim/mn10300/ChangeLog
@@ -8,6 +8,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure.ac (SIM_AC_OPTION_INLINE): Delete call.
* configure: Regenerate.
diff --git a/sim/mn10300/configure b/sim/mn10300/configure
index a9baee6..21e4cb3 100755
--- a/sim/mn10300/configure
+++ b/sim/mn10300/configure
@@ -753,6 +753,7 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
@@ -1408,6 +1409,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -12853,7 +12857,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12856 "configure"
+#line 12860 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12959,7 +12963,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12962 "configure"
+#line 12966 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13328,6 +13332,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
diff --git a/sim/moxie/ChangeLog b/sim/moxie/ChangeLog
index 605c9c4..d1f57f9 100644
--- a/sim/moxie/ChangeLog
+++ b/sim/moxie/ChangeLog
@@ -1,5 +1,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/moxie/configure b/sim/moxie/configure
index 514ea40..b43cb53 100755
--- a/sim/moxie/configure
+++ b/sim/moxie/configure
@@ -754,12 +754,12 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
enable_sim_endian
enable_sim_alignment
-enable_sim_environment
enable_werror
enable_build_warnings
enable_sim_build_warnings
@@ -1407,6 +1407,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -1414,9 +1417,6 @@ Optional Features:
--enable-sim-alignment=align
Specify strict, nonstrict or forced alignment of
memory accesses
- --enable-sim-environment=environment
- Specify mixed, user, virtual or operating
- environment
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
@@ -13324,6 +13324,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
@@ -13633,24 +13651,6 @@ fi
fi
-# Check whether --enable-sim-environment was given.
-if test "${enable_sim_environment+set}" = set; then :
- enableval=$enable_sim_environment; case "${enableval}" in
- all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
- user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
- virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
- operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
- sim_environment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
- echo "Setting sim environment = $sim_environment" 6>&1
-fi
-else
- sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
-fi
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
diff --git a/sim/moxie/configure.ac b/sim/moxie/configure.ac
index d930208..afbeef9 100644
--- a/sim/moxie/configure.ac
+++ b/sim/moxie/configure.ac
@@ -9,7 +9,6 @@ AC_CHECK_TOOL(DTC, dtc)
SIM_AC_OPTION_ENDIAN(BIG)
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT)
-SIM_AC_OPTION_ENVIRONMENT
SIM_AC_OPTION_WARNINGS
SIM_AC_OUTPUT
diff --git a/sim/msp430/ChangeLog b/sim/msp430/ChangeLog
index 5d5e7ce..277126f 100644
--- a/sim/msp430/ChangeLog
+++ b/sim/msp430/ChangeLog
@@ -8,6 +8,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure.ac (SIM_AC_OPTION_INLINE): Delete call.
* configure: Regenerate.
diff --git a/sim/msp430/configure b/sim/msp430/configure
index 5409bac..5b62f55 100755
--- a/sim/msp430/configure
+++ b/sim/msp430/configure
@@ -753,6 +753,7 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
@@ -1405,6 +1406,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -12844,7 +12848,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12847 "configure"
+#line 12851 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12950,7 +12954,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12953 "configure"
+#line 12957 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13319,6 +13323,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
diff --git a/sim/rl78/ChangeLog b/sim/rl78/ChangeLog
index 6707b6c..2f76725 100644
--- a/sim/rl78/ChangeLog
+++ b/sim/rl78/ChangeLog
@@ -18,6 +18,10 @@
* configure: Regenerate.
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-09 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
diff --git a/sim/rl78/configure b/sim/rl78/configure
index 64e3f31..86e5db8 100755
--- a/sim/rl78/configure
+++ b/sim/rl78/configure
@@ -753,6 +753,7 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
@@ -1400,6 +1401,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
@@ -12829,7 +12833,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12832 "configure"
+#line 12836 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12935,7 +12939,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12938 "configure"
+#line 12942 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13304,6 +13308,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
diff --git a/sim/rx/ChangeLog b/sim/rx/ChangeLog
index ecc5a37..461b4cc 100644
--- a/sim/rx/ChangeLog
+++ b/sim/rx/ChangeLog
@@ -18,6 +18,10 @@
* configure: Regenerate.
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-09 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
diff --git a/sim/rx/configure b/sim/rx/configure
index c8767cf..0125ce7 100755
--- a/sim/rx/configure
+++ b/sim/rx/configure
@@ -753,6 +753,7 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
@@ -1402,6 +1403,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--disable-cycle-accurate
@@ -12834,7 +12838,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12837 "configure"
+#line 12841 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12940,7 +12944,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12943 "configure"
+#line 12947 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13309,6 +13313,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
diff --git a/sim/sh/ChangeLog b/sim/sh/ChangeLog
index d897ae0..76b2775 100644
--- a/sim/sh/ChangeLog
+++ b/sim/sh/ChangeLog
@@ -1,5 +1,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/sh/configure b/sim/sh/configure
index cf8a451..b4e6c82 100755
--- a/sim/sh/configure
+++ b/sim/sh/configure
@@ -753,12 +753,12 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
enable_sim_endian
enable_sim_alignment
-enable_sim_environment
enable_werror
enable_build_warnings
enable_sim_build_warnings
@@ -1406,6 +1406,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -1413,9 +1416,6 @@ Optional Features:
--enable-sim-alignment=align
Specify strict, nonstrict or forced alignment of
memory accesses
- --enable-sim-environment=environment
- Specify mixed, user, virtual or operating
- environment
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
@@ -13323,6 +13323,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
@@ -13539,24 +13557,6 @@ fi
fi
-# Check whether --enable-sim-environment was given.
-if test "${enable_sim_environment+set}" = set; then :
- enableval=$enable_sim_environment; case "${enableval}" in
- all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
- user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
- virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
- operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
- sim_environment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
- echo "Setting sim environment = $sim_environment" 6>&1
-fi
-else
- sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
-fi
-
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
diff --git a/sim/sh/configure.ac b/sim/sh/configure.ac
index 6d5622e..a93418f 100644
--- a/sim/sh/configure.ac
+++ b/sim/sh/configure.ac
@@ -7,7 +7,6 @@ SIM_AC_COMMON
SIM_AC_OPTION_ENDIAN
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT,STRICT_ALIGNMENT)
-SIM_AC_OPTION_ENVIRONMENT
SIM_AC_OPTION_WARNINGS
SIM_AC_OUTPUT
diff --git a/sim/sh64/ChangeLog b/sim/sh64/ChangeLog
index 0c47bec..81cc8a3 100644
--- a/sim/sh64/ChangeLog
+++ b/sim/sh64/ChangeLog
@@ -1,5 +1,10 @@
2016-01-10 Mike Frysinger <vapier@gentoo.org>
+ * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
+ * configure: Regenerate.
+
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
diff --git a/sim/sh64/configure b/sim/sh64/configure
index 19d76f1..88b9255 100755
--- a/sim/sh64/configure
+++ b/sim/sh64/configure
@@ -756,6 +756,7 @@ enable_sim_stdio
enable_sim_trace
enable_sim_profile
enable_sim_assert
+enable_sim_environment
enable_sim_inline
with_pkgversion
with_bugurl
@@ -763,7 +764,6 @@ enable_sim_endian
enable_sim_alignment
enable_sim_scache
enable_sim_default_model
-enable_sim_environment
enable_cgen_maint
enable_sim_hardware
'
@@ -1410,6 +1410,9 @@ Optional Features:
--enable-sim-profile=opts
Enable profiling flags
--enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
--enable-sim-inline=inlines
Specify which functions should be inlined
--enable-sim-endian=endian
@@ -1421,9 +1424,6 @@ Optional Features:
Specify simulator execution cache size
--enable-sim-default-model=model
Specify default model to simulate
- --enable-sim-environment=environment
- Specify mixed, user, virtual or operating
- environment
--enable-cgen-maint=DIR build cgen generated files
--enable-sim-hardware=LIST
Specify the hardware to be included in the build.
@@ -13329,6 +13329,24 @@ else
fi
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+ user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
+ sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+ echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+ sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
sim_inline="-DDEFAULT_INLINE=0"
# Check whether --enable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then :
@@ -13580,24 +13598,6 @@ fi
-# Check whether --enable-sim-environment was given.
-if test "${enable_sim_environment+set}" = set; then :
- enableval=$enable_sim_environment; case "${enableval}" in
- all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
- user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
- virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
- operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
- sim_environment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
- echo "Setting sim environment = $sim_environment" 6>&1
-fi
-else
- sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
-fi
-
-
cgen_maint=no
cgen=guile
cgendir='$(srcdir)/../../cgen'
diff --git a/sim/sh64/configure.ac b/sim/sh64/configure.ac
index 818af12..04bcd56 100644
--- a/sim/sh64/configure.ac
+++ b/sim/sh64/configure.ac
@@ -9,7 +9,6 @@ SIM_AC_OPTION_ENDIAN([], BIG)
SIM_AC_OPTION_ALIGNMENT(STRICT_ALIGNMENT)
SIM_AC_OPTION_SCACHE(16384)
SIM_AC_OPTION_DEFAULT_MODEL(sh5)
-SIM_AC_OPTION_ENVIRONMENT
SIM_AC_OPTION_CGEN_MAINT
SIM_AC_OPTION_HARDWARE(yes,"","")
diff --git a/sim/v850/ChangeLog b/sim/v850/ChangeLog
index 35c4108..47ae875 100644
--- a/sim/v850/ChangeLog
+++ b/sim/v850/ChangeLog
@@ -18,6 +18,10 @@
* configure: Regenerate.
+2016-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-09 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
diff --git a/s[...]
[diff truncated at 100000 bytes]