Re: New port for ARM Industrial Module AIM 711 ( 2 ) - Checked by AntiV

[Roland Caßebohm <roland dot cassebohm at VisionSystems dot de>]

Am Donnerstag, 13. Mai 2004 17:14 schrieb Andrew Lunn:
> On Thu, May 13, 2004 at 05:07:23PM +0200, Roland Ca?ebohm 
wrote:
> > Am Donnerstag, 13. Mai 2004 16:10 schrieb Andrew Lunn:
> > > On Thu, Apr 29, 2004 at 03:59:49PM +0200, Roland
> > > Ca?ebohm
> >
> > wrote:
> > > > Hi,
> > > >
> > > > this is the improved port for the ARM Industrial
> > > > Module AIM 711 from Vision Systems GmbH.
> > >
> > > It looks like the serial drivers is a cut&paste of
> > > the e7t driver with all the functions names renamed.
> > > Is it possible to actually use the e7t driver as is?
> >
> > Yes the driver is just a copy of the e7t driver, but I
> > have made it like the generic 16550 driver, that it
> > could be used from different platforms, which is not
> > the case in the original e7t driver. There are the
> > snds100, e7t and the aim711 platform which have the
> > s3c4510 processor from Samsung.
> >
> > If you like I could make some packages for e7t and
> > snds100, which use the generic s3c4510 driver.
>
> Lets get the AIM711 commited first. We can then come back
> and clean up the e7t and snds100.

Yes you are right.

Roland
-- 

___________________________________________________

VS Vision Systems GmbH, Industrial Image Processing
Dipl.-Ing. Roland Caßebohm
Aspelohe 27A, D-22848 Norderstedt, Germany
Mail: roland.cassebohm@visionsystems.de
http://www.visionsystems.de
___________________________________________________