This is the mail archive of the ecos-patches@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: New port for ARM Industrial Module AIM 711 ( 2 ) - Checked by AntiV


On Thu, May 13, 2004 at 05:07:23PM +0200, Roland Ca?ebohm wrote:
> Am Donnerstag, 13. Mai 2004 16:10 schrieb Andrew Lunn:
> > On Thu, Apr 29, 2004 at 03:59:49PM +0200, Roland Ca?ebohm 
> wrote:
> > > Hi,
> > >
> > > this is the improved port for the ARM Industrial Module
> > > AIM 711 from Vision Systems GmbH.
> >
> > It looks like the serial drivers is a cut&paste of the
> > e7t driver with all the functions names renamed. Is it
> > possible to actually use the e7t driver as is?
> 
> Yes the driver is just a copy of the e7t driver, but I have 
> made it like the generic 16550 driver, that it could be 
> used from different platforms, which is not the case in the 
> original e7t driver. There are the snds100, e7t and the 
> aim711 platform which have the s3c4510 processor from 
> Samsung.
> 
> If you like I could make some packages for e7t and snds100, 
> which use the generic s3c4510 driver.

Lets get the AIM711 commited first. We can then come back and clean up
the e7t and snds100.

        Andrew


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]