This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
AW: AW: FreeBSD not always releasing ACK MBUFs
- From: "Richard Rauch" <rrauch at itrgmbh dot de>
- To: "'Laurie Gellatly'" <laurie dot gellatly at netic dot com>
- Cc: <ecos-discuss at sourceware dot org>
- Date: Sun, 28 Apr 2013 14:12:44 +0200
- Subject: AW: AW: FreeBSD not always releasing ACK MBUFs
- References: <001201ce4404$f89d4f20$e9d7ed60$ at netic dot com> <001501ce4406$9f7a0670$de6e1350$ at itrgmbh dot de> <6AE794FE-711D-410C-B747-335C163616B7 at netic dot com>
Hmm, hard to say, what exactely is the reason for your problems.
The stack is well known for having several problems regarding mbufs and others...but I thought, the commercial eCosPro Version, you are using, should contain an improved stack version!
One of our porting projects was for Atmel AT91SAM9G45 and our customer Softing provided a bunch of improvements.
You could compare your version with our version, available at http://tiprom.itrgmbh.com/projects/ecos-on-atmel9g45
Maybe it's helpful!
Richard
> -----UrsprÃngliche Nachricht-----
> Von: ecos-discuss-owner@ecos.sourceware.org [mailto:ecos-discuss-
> owner@ecos.sourceware.org] Im Auftrag von Laurie Gellatly
> Gesendet: Sonntag, 28. April 2013 13:56
> An: Richard Rauch
> Cc: <ecos-discuss@sourceware.org>
> Betreff: Re: AW: [ECOS] FreeBSD not always releasing ACK MBUFs
>
> FreeBSD. How did I miss that important fact???
>
> ...Laurie:{)
> +61 416 114419
>
>
> On 28/04/2013, at 9:50 PM, "Richard Rauch" <rrauch@itrgmbh.de> wrote:
>
> > Hello,
> >
> > which TCP/IP Stack are you using? FreeBSD or lwIP?
> >
> > Richard
> >
> > ITR GmbH
> > web: http://www.itrgmbh.com
> > email: info@itrgmbh.com
> >
> >
> >> -----UrsprÃngliche Nachricht-----
> >> Von: ecos-discuss-owner@ecos.sourceware.org [mailto:ecos-discuss-
> >> owner@ecos.sourceware.org] Im Auftrag von Laurie Gellatly
> >> Gesendet: Sonntag, 28. April 2013 13:39
> >> An: ecos-discuss@sourceware.org
> >> Betreff: [ECOS] FreeBSD not always releasing ACK MBUFs
> >>
> >> Hi All,
> >> I'm using eCosPro from pre eCos 3.0 to serve web pages with embedded
> >> images, CSS and javascripts.
> >> Some pages are set to refresh their content and eventually the
> >> application runs out of MBUFs and restarts.
> >> I can use my own web server or the CYGPKG_HTTPD server with the same
> >> result.
> >>
> >> I used the CYGPKG_HTTPD server on port 81 to monitor network stats.
> >> What I find is that the âHEADERâ type MBUFs grow and never shrink,
> >> eventually running out of MBUFs completely.
> >> The amount of growth in each iteration varies.
> >> When I dump the data in the HEADER MBUFs (modified support.c to print
> >> these short MBUFs) and compared them to the network traffic seen by
> >> wireshark I have confirmed that the HEADERs are correct ACK packets
> >> sent at the close of various HTTP get sequences.
> >> For some reason they are not being released.
> >>
> >> I also found that the number of timeout entries (NTIMEOUTS) in
> >> timeout.c (default 8) is WAY below what is needed (about 70 being used).
> >>
> >> I'm thinking it's something to do with TIME_WAIT not closing the
> >> tcpcb when it should.
> >>
> >> Has anyone seen this before or can suggest a way to troubleshoot this?
> >>
> >> Thanks ...Laurie:{)
> >>
> >>
> >>
> >>
> >> --
> >> Before posting, please read the FAQ:
> >> http://ecos.sourceware.org/fom/ecos
> >> and search the list archive:
> >> http://ecos.sourceware.org/ml/ecos-discuss
> >
> >
> >
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss