This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Using 1 counter for 2 alarms
- From: Elad Yosef <elad dot yosef at gmail dot com>
- To: ricky wu <rickleaf dot wu at gmail dot com>
- Cc: ecos-discuss at ecos dot sourceware dot org
- Date: Thu, 1 Sep 2011 18:39:39 +0300
- Subject: Re: [ECOS] Using 1 counter for 2 alarms
- References: <CAOFa9c02ZKuC+XhzRXzFBRyM8K2HjaddkYshHjQsPvdp+6enGg@mail.gmail.com> <CAEf1uYoHTsDTjxqjpz=qpvAzZzkVORCsxZh3yCvcMtBB27-sXA@mail.gmail.com>
So only the first defined alarm_handler will called?
Or the first defined will be called first and the other will be called later
On Thu, Sep 1, 2011 at 6:24 PM, ricky wu <rickleaf.wu@gmail.com> wrote:
> I think the first starting up alarm will be excuted
>
> 2011/9/2 Elad Yosef <elad.yosef@gmail.com>
>>
>> Hi,
>> is there a problem that 2 separate alarms will use the same counter
>> source?
>> which one will called first when the counter ticks?
>>
>> thanks
>>
>> Elad
>>
>> --
>> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
>> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>>
>
>
>
> --
> Best Regards
> Ricky Wu
> eMBosLab Master
> rickleaf.wu@gmail.com
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss