This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: can baudrate for 72M
All is correct with the list. Please, do not post the same question
again and again.
And before you ask, please, follow next points
http://www.catb.org/~esr/faqs/smart-questions.html#before
On Mon, 18 Jul 2011, cyl cyl wrote:
> Hi all:
> I'm using ecos3.0 on lpc2478, cpu clock was set to 72M (for eth ,
> if set lower the eth has underrun problem), but I found it only
> supports 60, 30, 15, 48, 24, 12M of can_clk in file
> can_lpc2xxx_baudrates.h
> Is there a table for 72 or 36 or 18 clk can? Or how to set the
> CAN1BTR register if the cpu is 72M?
As you could see there is not such tables there.
BTW, Uwe described here how he filled-in the CAN tables for lpc2xxx
http://ecos.sourceware.org/ml/ecos-discuss/2007-10/msg00132.html
Please, investigate.
Sergei
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss