This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: USB mass storage package (slave side).
- From: John Dallaway <john at dallaway dot org dot uk>
- To: Christophe Coutand <ccoutand at stmi dot com>, eCos Discussion <ecos-discuss at ecos dot sourceware dot org>
- Date: Mon, 28 Jun 2010 09:15:36 +0100
- Subject: [ECOS] Re: USB mass storage package (slave side).
- References: <D6050C555CC56940A7AF32652283027602FFE45F@mail2.STMIRV01.COM>
Hi Christophe and all
Christophe Coutand wrote:
> There has been some request for a USB mass storage package (slave side).
> This was tested on AT91 architecture with the AT91 eCos USB device
> driver. Some patches are required to the AT91 USB device driver for this
> package to work properly. If anyone has the possibility to test it with
> other architecture it would be most welcome.
Many thanks for your contribution. The main problem with testing on
other architectures will be the lack of USB slave drivers for most eCos
targets.
Is there anyone out there who has an eCos target with USB slave driver
that could run up the mass storage test within Christophe's
contribution? A big-endian target would be ideal, to provide better
coverage testing.
John Dallaway
eCos maintainer
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss