This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: configtool shows only Fujitsu FR400 support
- From: John Dallaway <john at dallaway dot org dot uk>
- To: benoit dot callebaut at gmail dot com
- Cc: ecos-discuss at ecos dot sourceware dot org
- Date: Sun, 15 Nov 2009 16:51:44 +0000
- Subject: [ECOS] Re: configtool shows only Fujitsu FR400 support
- References: <4AFFCCB9.900@gmail.com>
Hi Benoit
Benoit Callebaut wrote:
> I am starting using eCos.
> I want to use it on my sam7ex256 board. I installed ecos under Linux
> (and Cygwin) using the on site doc (installed arm-eabi).
> When I start the configtool, it shows only the Fujitsu FR400 CPU and
> evaluation board in HAL.
The configuration tree contains the _loaded_ packages only. To switch
targets, use the Templates dialog via the Tools -> Templates menu item.
> I have also only 6 targets in the platform dialog.
The Platforms dialog allows you to manipulate the set of GDB commands
used for running eCos tests.
I hope this helps...
John Dallaway
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss