This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

Re: fatal error when building ecos with lwip

From: John Dallaway <john at dallaway dot org dot uk>
To: Bob dot Brusa at gmail dot com
Cc: ecos-discuss <ecos-discuss at ecos dot sourceware dot org>
Date: Fri, 17 Jul 2009 17:16:47 +0100
Subject: [ECOS] Re: fatal error when building ecos with lwip
References: <op.uw7it3z0keg3uf@localhost> <b18c5f790907170329g7bf29189i31de12790e372800@mail.gmail.com> <op.uw7qgss7keg3uf@localhost>

Hi Robert

Robert Brusa wrote:

> Now it builds succesfully. It seems that the macro
> CYGPKG_IO_ETH_DRIVERS_STAND_ALONE was the problem. Disabling it and
> it worked. However, I do not understand what this macro does - or
> does not. Has anyone a hint what this "stand-alone" means in this
> context. Thank you.

In this context, "standalone" describes a TCP/IP stack which does not
use the eCos kernel. Such a stack might be provided by RedBoot or by
application code. The various eCos ethernet drivers will be built
without interrupt handlers if CYGPKG_IO_ETH_DRIVERS_STAND_ALONE is enabled.

John Dallaway

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

References:
- fatal error when building ecos with lwip
  - From: Robert Brusa
- Re: fatal error when building ecos with lwip
  - From: Mandeep Sandhu
- Re: fatal error when building ecos with lwip
  - From: Robert Brusa

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]