This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
redboot can't startup on at91sam7s
- From: wb ning <helloningwb at gmail dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Wed, 17 Jun 2009 14:31:33 +0800
- Subject: [ECOS] redboot can't startup on at91sam7s
hi, all,
I built my redboot and burn it into the Flash of at91sam7s, but after
downing it into flash successfully, It can't startup at all.
I used these command to built to the redboot, i can't find where there
is a mistake.
ecosconfig new at91sam7sek redboot
ecosconfig add error
ecosconfig import
$ECOS_REPOSITORY/hal/arm/at91/at91sam7s/v3_0/misc/redboot_ROM.ecm
ecosconfig tree
make
Then, i got redboot.bin in the directory install/bin. After burn it
into the Flash address 0x100000, i expect it can run just as my other
*.bin, but it failed. Could someone tell what the problem is? Thanks
very much.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss