This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
RedBoot compilation error
- From: Max Salov <amx at me dot by>
- To: ecos-discuss at sourceware dot org
- Date: Mon, 16 Feb 2009 17:02:26 +0200
- Subject: [ECOS] RedBoot compilation error
Hello,
I try to build RedBoot for stm3210e evaluation board.
I use ecoscentric-gnutools-arm-eabi-20081213-sw.cygwin (path to gcc
executable /gnutools/arm-eabi/bin/arm-eabi-gcc.exe is added to PATH) and
ecos-trunk-090215 snapshot.
$ ecosconfig new stm3210e_eval redboot
U CYGSEM_HAL_USE_ROM_MONITOR, new inferred value 0
U CYGBLD_REDBOOT_MAX_MEM_SEGMENTS, new inferred value 3
U CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK, new inferred value 0
U CYGNUM_REDBOOT_FLASH_BASE, new inferred value 0x64000000
$ ecosconfig import
/ecos/packages/hal/cortexm/stm32/stm3210e_eval/current/misc/redboot_ROM.ecm
U CYGDBG_HAL_CRCTABLE_LOCATION, new inferred value ROM
$ ecosconfig tree
$ make
...
headers finished
make -r -C hal/cortexm/arch/current build
make[1]: Entering directory `/ecos-dev/hal/cortexm/arch/current'
arm-eabi-gcc -c -I/ecos-dev/install/include
-I/ecos/packages/hal/cortexm/arch/current
-I/ecos/packages/hal/cortexm/arch/current/src
-I/ecos/packages/hal/cortexm/arch/current/tests -I.
-I/ecos/packages/hal/cortexm/arch/current/src/ -finline-limit=7000 -Wall
-Wpointer-arith -Wstrict-prototypes -Wundef -Wno-write-strings
-mcpu=cortex-m3 -mthumb -g -O2 -ffunction-sections -fdata-sections
-fno-exceptions -Wp,-MD,src/hal_misc.tmp -o
src/hal_cortexm_arch_hal_misc.o
/ecos/packages/hal/cortexm/arch/current/src/hal_misc.c
make[1]: *** [src/hal_misc.o.d] Error 1
make[1]: Leaving directory `/ecos-dev/hal/cortexm/arch/current'
make: *** [build] Error 2
I have never faced such error. May be additional configuration should be
performed?
Best regards,
Max
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss