This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Fwd: I have modified GRG(IXP425 based) for wrv54g(IXP425). Not communicating with network.
- From: "Ajit Mittal" <ajitmittal at gmail dot com>
- To: ecos-discuss at sourceware dot org
- Date: Thu, 6 Mar 2008 11:21:39 -0500
- Subject: [ECOS] Fwd: I have modified GRG(IXP425 based) for wrv54g(IXP425). Not communicating with network.
- References: <dfa7268c0803051816w17aff5e9s97a05feea6228035@mail.gmail.com> <dfa7268c0803060610j6e913956ic2ef15c0bc0a16d6@mail.gmail.com>
I have downloaded the redboot sources for IXP425 based router and use
the grg board as base.
I have only modified the Flash size and the RAM size.
I am getting redboot prompt.
Also gets this while booting which shows that eth port is fine.
Trying NPE-B...success. Using NPE-B with PHY 1
But it is not communicating with the network. How to troubleshoot?
Regards
Ajit
Thanks
Ajit
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss