This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: at91Arm7sek running without the pll


Oki, i will try to work with it a bit then... - thx

2008/2/25, Andrew Lunn <andrew@lunn.ch>:
> On Mon, Feb 25, 2008 at 05:05:38PM +0100, Tobias Nielsen wrote:
>  > Nope, i have a situation where the the external components to drive
>  > the PLL is not connected - therefore i have to run without the PLL
>  >
>  > 2008/2/25, Andrew Lunn <andrew@lunn.ch>:
>  > > On Mon, Feb 25, 2008 at 03:47:26PM +0100, Tobias Nielsen wrote:
>  > >  > I have been sitting for some time to try to figure out a way to
>  > >  > completely skip the PLL AND at the same time use the main oscillator
>  > >  > bypass feature. I can see that the usage of the PLL is more or less
>  > >  > directly coded in to a macro in the header:
>  > >  >
>  > >  > hal/arm/at91/at91sam7s/current/include/hal_platform_setup.h
>  > >  >
>  > >  > But if i want to completely bypass that feature and follow the
>  > >  > instructions in the datasheet that states OSCBYPASS should be set to 1
>  > >  > and MOSCEN must be set 0 - i have absolutely no idea on how to put
>  > >  > that functionality in to the system without hacking a lot of code that
>  > >  > i in principle have no knowledge about...
>  > >  >
>  > >  > Do anyone know how to make that bypass?
>  > >
>  > >
>  > > It will be a little bit messy.
>  > >
>  > >  Why do you need to turn the PLL off? Can you live with the PLL simply
>  > >  multiplying by 1 and dividing by 1?
>
>
> Then i suggest you add CDL control of this. A new option say
>
>  CYGBLD_HAL_ARM_AT91_PLL_BYPASS
>
>  So that CYGNUM_HAL_ARM_AT91_CLOCK_SPEED is calculated correctly, you
>  want some requires statements in the CYGBLD_HAL_ARM_AT91_PLL_BYPASS
>  option. Something like
>
>  cdl_option CYGBLD_HAL_ARM_AT91_PLL_BYPASS {
>     display  "Bypass the PLL"
>     flavor bool
>     default_value 0
>
>     requires CYGNUM_HAL_ARM_AT91_PLL_MULTIPLIER == 2
>     requires CYGNUM_HAL_ARM_AT91_PLL_DIVIDER == 1
>
>     description "
>        The PLL requires external components which not all targets have.
>         Enabling this option bypasses the PLL."
>  }
>
>  Then in hal_platform_setup.h add the necassary code inside #ifdefs.
>
>
>      Andrew
>


-- 
Yours kindly

Tobias Nielsen

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]