This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: RE: eCos configtool doesn't work on cygwin
- From: Gary Thomas <gary at mlbassoc dot com>
- To: Jérémy Alles <jeremy dot alles at orange-ftgroup dot com>
- Cc: Gentleman dot nbg at gmx dot de, ecos-discuss at ecos dot sourceware dot org
- Date: Wed, 06 Feb 2008 07:36:23 -0700
- Subject: Re: [ECOS] RE: eCos configtool doesn't work on cygwin
- References: <200802061407.m16E7LtV022886@smtp.silicomp.fr>
Jérémy Alles wrote:
Hi there,
I'm a new user to eCos (I started to work with it yesterday !) and I had the
same problem (configtool under Cygwin not working). I solved this problem by
using an up-to-date version of configtool that I downloaded from this page:
http://www.ecoscentric.com/devzone/configtool.shtml
I'd also *strongly* suggest using the anonymous CVS - eCos 2.0 is approaching
6 years old.
Also, Mr "Gentleman.nbg" (real names are preferred here!), you'll need to
port eCos to your platform. Starting from the most up to date sources
would be a wise move.
-----Message d'origine-----
De : ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] De la part de
Gentleman.nbg@gmx.de
Envoyé : mercredi 6 février 2008 14:56
À : ecos-discuss@ecos.sourceware.org
Objet : [ECOS] eCos configtool doesn't work on cygwin
Hello eCos-Team,
I am currenty trying to build a eCos System with an application that I wrote
for my studies.
Now I have a problem with the configtool under Cygwin.
I downloaded a eCos 2.0 source, where there is a configtool.exe in
ecos-2.0/tools/bin when executing it under cygin nothing happens. not even a
message from shell.
Then I read that there are some problems with recent cygwin versions, so I
tryied to execute the unsupported snapshot of the configtool that should
work with the recent cygwin version. This configtool doesnt execute eather.
I found an Windows version of configtool that I could install and even run
under Windows, but I don't know if I should use it.
My target is a Freescale MPC5516 microcontroller, that should be able to run
eCos 2.0. In the templates I don't know what to choose.
What do u suggest? How can I make a build of eCos now?
Thank you very much
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss