This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Other format: | [Raw text] |
The existing tools are built agains TCL/TK 8.3 which are not on the new system. I tried --host=i686-linux-gnu, and it now no longer complains about the x86_64 stuff. But as I suspected, it now can't find the TCL/TK (tclConfig.sh/tkConfig.sh). Did these files get removed in version 8.4? Jay -----Original Message----- From: Gary Thomas [mailto:gary@mlbassoc.com] Sent: Friday, November 30, 2007 9:27 AM To: Jay Foster Cc: ecos-discuss@ecos.sourceware.org Subject: Re: [ECOS] Host Tools Build Problem - Fedora 8 Jay Foster wrote: > Yes, but there seems to be some 'sub-configures' that aren't getting the > --host= argument passed to them, and do the guess host thing, which guesses > x86_64-unknown-linux-gnu again, which fails. > > I'm also concerned that even if I could get past this, it would fail finding > TCL and TK, since there doesn't seem to be a tclConfig.sh or tkConfig.sh > file anywhere on the installation. Yes, I did install TCL and TK (version > 8.4). I don't have an x86_64 system installed here (I run simple x86 kernel on my AMD/64 boxes), so I can't test this. Is there something in particular you need to [re]build the host tools for? > -----Original Message----- > From: Gary Thomas [mailto:gary@mlbassoc.com] > Sent: Friday, November 30, 2007 9:08 AM > To: Jay Foster > Cc: ecos-discuss@ecos.sourceware.org > Subject: Re: [ECOS] Host Tools Build Problem - Fedora 8 > > > Jay Foster wrote: >> I'm trying to build the host tools (ecosconfig, et al) on a new install of >> Fedora 8 (x86_64). I am getting the following error when running > configure: >> checking build system type... Invalid configuration >> `x86_64-unknown-linux-gnu': machine `x86_64-unknown' not recognized. >> >> I tried adding --host=x86_64-linux-gnu to the configure options, but it >> seems that the configure script isn't passing this down to the >> sub-configures, and I end up with the same error further on. I'm sure >> someone has built these tools on a x86_64 linux architecture that could >> provide me with the solution to this problem. > > I'd be a little surprised if someone had :-) > > Did you try forcing the host to be just x86-linux-gnu? The > process will probably work just as well with that setting. > -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |