This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Recommendation on Evaluation boards
Sorry I missed the link with supported hw. Here it is:
http://ecos.sourceware.org/hardware.html
Ilija Koco wrote:
> eCos is ported to some automotive platforms such as Freescale's MPC500
> and MAC7100.
> Here you will find info of some supported hardware.
>
> Best regards
> Ilija
>
> Klaus Nji wrote:
>
>> Any additional piece of information will be of help.
>>
>> I am currently looking for an Evaluation board for an automotive application.
>>
>> I have looked at the list currently listed on eCosCentric but could use some additional advice or recommendations based on recent experiences. I want to minimize running into technical difficulties arising from incompatibility issues given my limited resources.
>>
>> As of now, hardware requirements are:
>>
>> • 32 or 64 bit CPU (CPU speed not crucial as time fastest dynamic is 1s).
>> • Low Power Consumption or Sleep Mode capability
>> • Expandable Flash Memory for field upgrade of firmware
>> • 3x RS-232
>> • CAN interface
>> • 1 Audio/Video
>> • 1 USB 2.0 port (not mandatory)
>> • Couple of analog and digital I/O
>> • eCos recently ported onto board with minimal technical difficulties.
>>
>> Again, any advice from recent experiences will be greatly appreciated.
>>
>> Thanks in advance,
>>
>>
>> Klaus
>>
>>
>>
>
>
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss