This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Redboot hanging after "go" command
- From: "Sridhar k" <ksridhar231 at gmail dot com>
- To: "eCos discuss mail list" <ecos-discuss at ecos dot sourceware dot org>
- Date: Mon, 23 Oct 2006 16:08:43 -0700
- Subject: [ECOS] Redboot hanging after "go" command
Hi everyone,
Am trying to load a simple hello world program after loading the
Redboot image into my LPCE2214 target(host is windows/cygwin).
The redboot image seems to be working fine.am able to ping the board
from the host and also i can ping the host from the target board
(from redboot prompt in terminal app). And here are the some redboot
command outputs for ref..
*******************************
Non-certified release, version UNKNOWN - built 03:05:23, Oct 19 2006
Platform: Olimex LPC-E2294 development board (ARM7TDMI)
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.RedBoot(tm)
bootstrap and debug environment [ROM]
Copyright (C) 2003, 2004, 2005, 2006 eCosCentric Limitedrelease,
version UNKNOWN - built 03:05:23, Oct 19 2006
RAM: 0x81000000-0x81100000, [0x8100cce0-0x810ed000] available
Platform: Olimex LPC-E2294 development board (ARM7TDMI)
FLASH: 0x80000000 - 0x80100000, 16 blocks of 0x00010000 bytes each. 2000, 2001,
RedBoot> fis list
Name FLASH addr Mem addr Length Entry point
RedBoot 0x80000000 0x80000000 0x00020000 0x00000000
FIS directory 0x800F0000 0x800F0000 0x0000F000 0x00000000
RedBoot config 0x800FF000 0x800FF000 0x00001000 0x00000000
RedBoot>
RedBoot> channel
Current console channel id: 0
*******************************
/* this is a simple hello world program */
#include <stdio.h>
#include <cyg/kernel/kapi.h>
#include <cyg/infra/diag.h>
#include <cyg/io/io.h>
int main(void)
{
diag_printf("Hello, eCos world!\n");
return 0;
}
*******************************
I h've compiled this hello.c using the Makefile from exapmles
directory and made the "hello.srec" from "hello.o" using the
arm-elf-objcopy.
I have loaded this hello.sre file using the folowing command from
windows hyperterminal redboot promt.
*******************************
RedBoot> load -m ymodem -b 0x81010400
CCCAddress offset = 0x81010400
Entry point: 0x81010400, address range: 0x81010400-0x81010420
xyzModem - CRC mode, 2(SOH)/1(STX)/0(CAN) packets, 5 retries
RedBoot>
RedBoot> go
*******************************
$ arm-elf-size hello.srec
text data bss dec hex filename
0 52 0 52 34 hello.srec
after loading this when i give "go" command its hanging..its coming
out of this hang state only if i reset the target.
Please correct me if am doing any thing wrong.Please suggest.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss