This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Gdb- Problems with redboot/ecos under VMWare
- From: "Klaus Nagel" <klaus dot nagel at neuberger dot net>
- To: <ecos-discuss at ecos dot sourceware dot org>
- Date: Thu, 12 Oct 2006 10:22:09 +0200
- Subject: [ECOS] Gdb- Problems with redboot/ecos under VMWare
Hi all
I am trying to use ecos on VMWare to start developement of a networked
applikation because my real hardware ist still under construction.
I build redboot and eCos for VMWare with the latest Source- Snapshot with
i386-elf-gcc Version 3.4.3 and i386-elf-gdb 6.5.0. under cygwin;
I configured redboot and eCos both to use static IP- Adresses (two different
ones) and not to use BOOTP or DHCP.
When i build the eCos with the template "default" and try to debug the
twothreads example, everything works fine:
- can load the application
- start the debugger
- start and stop the target by pressing CTRL_C
- single stepping
- quit the debugging session
When i build eCos with the template "net" ( network support) , i can load
and start the application and the applictaion runs fine.
If the Application reaches a Brekpoint, the Debugger stops fine, and i can
resume the target.
But wenn i try to interrupt the running application (startet without any
breakpoint) by pressing CTRL_C, the debugger can not stop the target.
Am i missing somehing?
Do i need special configuration for redboot or ecos?
Thanks in advance.
Klaus
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss