This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: How to build a executed-in-flash application?
On Thu, Sep 07, 2006 at 09:35:40AM +0000, wang cui wrote:
> Thank you Andrew. I have create and run it successfully.
>
> There are still little problem:
> Since the applications has been wrote into flash, how to use "fis create"
> command to add it into FIS? I tried "fis create -n twothreads", but doesn't
> work. It report "*** invalid 'fis' command: required parameter missing".
>
> However, I can use "fis create twothreads" to directly add the application
> after "load".
You probably need to pass all the parameters. Eg the example in the
documentation at
http://ecos.sourceware.org/docs-latest/redboot/fis-create-command.html
is
fis create RedBoot -f 0xa0000000 -b 0x8c400000 -l 0x20000
ie load it into flash at address 0xa0000000 from RAM address
0x8c400000 with 0x20000 bytes of image data.
Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss