This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
IXP425 not booting with rom image...
- From: <vijay dot peshkar at wipro dot com>
- To: <ecos-discuss at ecos dot sourceware dot org>
- Date: Tue, 20 Jun 2006 17:15:15 +0530
- Subject: [ECOS] IXP425 not booting with rom image...
Friends,
I have flashed the default coyote rom image into my flash
on my IXP425 based board. Am using AXD debugger and
jtag based multi-ice setup for interaction.
On power on, am seeing that
1.the PC is having 0x0000000 value,
2.RAM and FLASH addresses are still
overlapping (expansion bus mapping not done)
3.If I manually modify PC to 0x50000040(reset_vector),
the AXD debugger aborts
Any pointers on how I can make PC load and run from reset_vector
would be helpful.
Regards,
Vijay
------------------------
Vijay Kumar .P
Wipro Technologies,
Tel: 30295119
------------------------
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.
www.wipro.com
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss