This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: eCos & RedBoot on AT91SAM7S
On Thu, Jun 15, 2006 at 09:44:25PM +0400, Evgeny Belyanco wrote:
> Thursday, June 15, 2006, 9:32:16 PM, you wrote:
> >> will I be capable of writing code to FLASH via GDB (RS-232
> >> connection)?
>
> AL> Using gdb, no. You need to use redboot itself to do an xyzmodem load
> AL> into flash.
>
> >> Can I make debugging in FLASH via GDB (RS-232 connection)?
>
> AL> You cannot have break points, or single step. So this makes it very
> AL> hard to do anything useful.
>
> AL> The only practicaly way to debug code in Flash is over the jtag
> AL> interface.
>
> If I will use simple JTAG tool, for example Macraigor usb2Sprite?
> http://www.macraigor.com/usb2sprite.htm
> will I can make FLASH write, break points, or single step in
> AT91SAM7S?
I've never used the MacGraigor tools.
Sorry,
Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss