This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Bringing up a board with Timesys image
- From: Gary Thomas <gary at mlbassoc dot com>
- To: Steve Thomas <sjthomas2 at gmail dot com>
- Cc: eCos Discussion <ecos-discuss at ecos dot sourceware dot org>
- Date: Tue, 18 Apr 2006 10:14:48 -0600
- Subject: Re: [ECOS] Bringing up a board with Timesys image
- References: <bc1288a80604171445i342e12fcm4c7936e78299d066@mail.gmail.com>
On Mon, 2006-04-17 at 17:45 -0400, Steve Thomas wrote:
> Hello!! I am not sure if this is the correct forum for redboot.
>
> But this group is what I found for discussing redboot issues.
>
> I am trying to bring a board up that is running Timesys linux. I
> assume that the CPU register values r0, r1 and r2 should match that of
> the kernel that I am loading. I am very new to this. My board is based
> on the IXDP425 architechture. I made sure I included the IXDP425
> support while building the kernel. But my redboot hangs not
> recognizing the uncompressed linux image that I transferred. How can I
> make sure that the redboot has these values set correctly?
Please give more details; what do you mean "hangs"? What command did
you use to execute the Linux kernel?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss