This is the mail archive of the mailing list for the eCos project.

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: newbie - PB startup with Adder875

On Tue, Dec 27, 2005 at 06:22:15PM +0100, damien lefort wrote:
> Hi,
> I try to run the sample test "basic" from ecos distribution on Adder-875 
> (MPC875).
> I use the A&M distribution for configuration.
> I've generated the binary withour error but I can't execute the 
> generated code (only som incoherent chars on console). I've tried with 
> gdb and I got SIGEVT and nothing more.
> The board works well for RedBoot and also with the Linux installed in 
> the flash.
> What can I do?
> Thanks
> ====trace from console
> RedBoot(tm) bootstrap and debug environment [ROMRAM]
> A&M certified release, version 2005-09-07-RELEASE - built 19:59:38, Sep 
> 14 2005
> Platform: A&M Adder (PowerPC 875)
> Copyright (C) 2003, 2004, 2005, Analogue & Micro, Ltd.
> Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
> RAM: 0x00000000-0x01000000, [0x00053270-0x00fe1000] available
> FLASH: 0xfe000000 - 0xfe800000, 128 blocks of 0x00010000 bytes each.
> RedBoot> load basic
> Using default protocol (TFTP)
> Entry point: 0x00060000, address range: 0x00060000-0x00068cbc
> RedBoot> go 0x60000
> D.p.tpzppppqppp{pqzppp.p{Cv.D.p.tpzppppqppp{pqzppp.p{Cv.D.p.tpzppppqppp{pqzppp..

This could be a baud rate problem?


Before posting, please read the FAQ:
and search the list archive:

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]