This is the mail archive of the mailing list for the eCos project.

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

newbie - PB startup with Adder875


I try to run the sample test "basic" from ecos distribution on Adder-875 (MPC875).
I use the A&M distribution for configuration.
I've generated the binary withour error but I can't execute the generated code (only som incoherent chars on console). I've tried with gdb and I got SIGEVT and nothing more.
The board works well for RedBoot and also with the Linux installed in the flash.

What can I do?


====trace from console
RedBoot(tm) bootstrap and debug environment [ROMRAM]
A&M certified release, version 2005-09-07-RELEASE - built 19:59:38, Sep 14 2005

Platform: A&M Adder (PowerPC 875)
Copyright (C) 2003, 2004, 2005, Analogue & Micro, Ltd.
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

RAM: 0x00000000-0x01000000, [0x00053270-0x00fe1000] available
FLASH: 0xfe000000 - 0xfe800000, 128 blocks of 0x00010000 bytes each.
RedBoot> load basic
Using default protocol (TFTP)
Entry point: 0x00060000, address range: 0x00060000-0x00068cbc
RedBoot> go 0x60000



-- Before posting, please read the FAQ: and search the list archive:

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]