This is the mail archive of the
mailing list for the eCos project.
hal cme555 on cme564
- From: "Azkarate_Askasua Mikel" <MAzkarateAskasua at ikerlan dot es>
- To: <ecos-discuss at sources dot redhat dot com>
- Date: Thu, 15 Dec 2005 15:23:50 +0100
- Subject: [ECOS] hal cme555 on cme564
I'm trying to run the cme555 port for eCos into an Axiom's CME564 board.
The RedBoot seems to work properly (instead of being a Flash driver error).
I make a Hello.srec file with a 'default' viper and the 'makefile' from the examples directory.
I load it throught serial cable.
It seems to be copy correctly (I have made a dump of RAM memory and the data is the same that is in the '.srec' file).
But when I execute 'go' command it do nothing.
Is that normal because the execution pattern is diferent from cme555 board?
Does the Flash error affect in the RAM execution?
Any other suggestion would be greatly apreciated.
Thanks in advance,
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss