This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Flash problem with Intel P30
- From: Andrew Lunn <andrew at lunn dot ch>
- To: Abraham Celik <abrahamc at emtec dot com dot au>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Tue, 29 Nov 2005 09:16:18 +0100
- Subject: Re: [ECOS] Flash problem with Intel P30
- References: <!&!AAAAAAAAAAAYAAAAAAAAAFIbt4pofMRHph0T6anjO/ICgQAAEAAAAOtfHoypDHVHi+Xp6TtuxXoBAAAAAA==@emtec.com.au>
On Tue, Nov 29, 2005 at 06:31:23PM +1100, Abraham Celik wrote:
> Hi Guys,
>
> I am using an intel 28f256p30B flash on my ixp425 board. I get the following
> upon boot up:
Is this the normal flash device for that board? The source code for
the ixpd425 says it should be a 28F128.
My guess is that your flash device is being wrongly identified, or the
configuration parameters are wrong. You need to take a close look at
the hardware specific part of the flash driver in
packages/devs/flash/arm/ixp425 and the generic intel strata flash
driver in packages/dev/flash/intel/strata.
Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss