This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Flash V2 with 2 flash chips on board !
Hi !
Am Dienstag, 22. November 2005 09:47 schrieb Andrew Lunn:
> To Redboot they will still be two flash devices. But redboot will be
> happy to store images in both and it should also be happy to have an
> image which spans from one device to the second device. However i
> don't think i tested this.
> Are you using a jffs2 filesystem? I don't know how jffs2 will handle
> spanning two devices, especially if the block sizes are different
> between the two devices. This is something you will have to test.
Yes I want to use jffs2, but the two flash chips have the same block size, i
will contact mtd-guys if it will work. But concate support is in mtd, when
things run good jffs2 works with 2 concated flashs chips :-) hopefully
Redboot: I see that I have to test and to look if things could work as I want,
at the moment I only have a hardware with on flash chip. When I get the
hardware with two flash devices I come back and tell my experiences, thanks
for your explanations and help.
regards manfred
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss