This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Ethernet cl- DEBUG problem
- From: "Giovanni Perbellini" <perbellini at sci dot univr dot it>
- To: <ecos-discuss at sourceware dot org>
- Date: Thu, 3 Nov 2005 11:42:05 +0100
- Subject: [ECOS] Ethernet cl- DEBUG problem
- References: <20051031182855.frnlmzfyotmsk8sg@mail.studenti.univr.it> <20051031183212.GP4266@lunn.ch>
Hi all,
I'm using the Cirrus Logic ethrnet driver (cs8900a) on MIPS processor.
In the cs8900.h file is possible to set the DEBUG variable to get debugging
details.
If I set DEBUG=2 (for added data IO output: get_reg, put_reg) my program
does not start in a correct way.
What is the problem? (it seems that the diag_printf instructions slow down
the normal execution)
I don't get any error, but the execution is stopped in the ecos kernel.
Thanks in advance
Regards
Giovanni Perbellini
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss