This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
_control and _start are called several times in the begining
- From: mkhoyila at uci dot edu
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Mon, 22 Aug 2005 14:43:12 -0700 (PDT)
- Subject: [ECOS] _control and _start are called several times in the begining
Gentlemen
I have an issue (may be it is not an issue) about _control, _send and
_stop functions. As you see from below printout, above functions are
called three times before eCos settles down. Is this normal? Thanks for
your help.
eth0: MAC Address: 02:10:12:01:00:08
[cyg_net_init] Init: loopattach(0x00000000)
[cyg_net_init] Init: ifinit(0x00000000)
[cyg_net_init] Init: domaininit(0x00000000)
[cyg_net_init] Init: cyg_net_add_domain(0x800553e4)
New domain internet at 0x00000000
[cyg_net_init] Init: cyg_net_add_domain(0x80054e40)
New domain route at 0x00000000
[cyg_net_init] Init: cyg_route_init(0x00000000)
[cyg_net_init] Done
BOOTP[eth0] op: REPLY
htype: Ethernet
hlen: 6
hops: 0
xid: 0x0
secs: 0
flags: 0x0
hw_addr: 02:10:12:01:00:08
client IP: 192.168.1.8
my IP: 192.168.1.8
server IP: 192.168.1.10
gateway IP: 192.168.1.100
options:
subnet mask: 255.255.255.0
IP broadcast: 192.168.1.255
gateway: 192.168.1.100
inet_net() - entering...for network interface eth0
bcm63xx_start
xmit 42 bytes at 8007ad56 sg[1]
8007AD56: FF FF FF FF FF FF 02 10 12 01 00 08 08 06 00 01
|................|
8007AD66: 08 00 06 04 00 01 02 10 12 01 00 08 C0 A8 01 08
|................|
8007AD76: 00 00 00 00 00 00 C0 A8 01 08 |..........
|
bcm63xx_send
bcm63xx_control
bcm63xx_start
bcm63xx_control
bcm63xx_stop
bcm63xx_start
bcm63xx_control
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss