This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
860T redboot...almost there...but need a bit of help
- From: Michael Dorin <dorin at gr-303 dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Mon, 27 Jun 2005 13:55:07 -0700 (PDT)
- Subject: [ECOS] 860T redboot...almost there...but need a bit of help
- Reply-to: dorin at gr-303 dot com
It has taken a while, working on and off, but I have
finally made some good progress.
I can build and boot redboot, using the ROMRAM
configuration.
However, I still need to set the program counter
to 0x100 through my bdm port. If I power cycle
the board, it won't boot.
I understand this is because my flash is bigger
than 1 meg...but how do I remap the reset vectors
in redboot to land up higher?
Thanks,
Mike
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss