This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Redboot NPE No EEPROM support.
- From: Mark Salter <msalter at redhat dot com>
- To: bel rog <belrog at gmail dot com>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Fri, 03 Jun 2005 09:07:15 -0400
- Subject: Re: [ECOS] Redboot NPE No EEPROM support.
- References: <44931d5205060223003567186e@mail.gmail.com>
On Fri, 2005-06-03 at 14:00 +0800, bel rog wrote:
> Hello,
>
> I am new to Ecos and Redboot.
> I have a Custom board Ixp425 and NO EEPROM on the board.
> and have added the below lines to the Redboot_ROM.ecm file to use the flash.
> ---------------------------------------------------------------------------------------------
> cdl_option CYGSEM_DEVS_ETH_ARM_IXDP425_EEPROM {
> user_value 0
> };
> ---------------------------------------------------------------------------------------------
>
Actually, I was wrong about that being added to redboot_ROM.ecm. It
needs to be in a separate file. Then configure like this:
% ecosconfig new ixdp425 redboot
% ecosconfig import <path>/redboot_ROM.ecm
% ecosconfig add intel_npe
% ecosconfig add ixdp425_npe
% ecosconfig import <path>/no_eeprom.ecm << the cdl lines above.
% ecosconfig tree
--Mark
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss