This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Intel Strata Flash TE28F128J3 Problem.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I dont have change anything in code right now ... Redboot 1.92 is unable to
initialise the flash i guess... I have pasted the message in the previous
mails.
Prakash
On Monday 04 April 2005 01:56 pm, alfred hitch wrote:
> u are not making sense (to me atleast)
> what do u have on ur boards and whats the issue have now ?
> u haev 8 MB or 16 Mb of flash, and did u do changes in code, if yes, where
> >
>
> Alfred
>
> On Apr 4, 2005 3:33 AM, Annamalai Prakash <prakash@comodo.com> wrote:
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA1
> >
> > On Monday 04 April 2005 12:46 pm, alfred hitch wrote:
> > > Hi,
> > > If I am not wrong ..
> > > IXP425 based boards can have only 16Mb per chip select on expansion bus
> > > . which would mean u have 256 MB on different chip selects ??
> >
> > Thanks for your kind attention...I agree that Ixp425 based boards
> > supports Maximum of 16MBytes Flash chips. I am sorry, i have mistyped it
> > (thats for my SDRAM configruation 256Mbits) .... My board has only
> > 8MByte Flash.
> >
> > > Could that be the reason and how / what did you change to make this
> > > 256 instead of standard 16 MB which comes on IXdp425 boards (wasnt it
> > > ,, dont remember)
> > >
> > > Cheers,
> > > Alfred
> > >
> > > On Apr 4, 2005 2:02 AM, Annamalai Prakash <prakash@comodo.com> wrote:
> > > > Hi ,
> > > >
> > > > I wanted to bring up redboot with Intel's
> > > > TE28F128J3C150 (256Mb) in my ixdp425 Board (ixp425 Xscale processor).
> > > > I am using Intel Strata Flash driver which is integreated with ecos.
> > > > I am getting for Following output while board powerup/reset.
> > > >
> > > > +FLASH configuration checksum error or invalid key
> > > > No network interfaces found
> > > >
> > > > RedBoot(tm) bootstrap and debug environment [ROM]
> > > > Red Hat certified release, version 1.92 - built 14:54:46, Dec 30 2004
> > > >
> > > > Platform: Interface Masters Kings Canyon 3 Board (XScale)
> > > > Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
> > > >
> > > > RAM: 0x00000000-0x04000000, 0x0006b090-0x01fd1000 available
> > > > FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
> > > > RedBoot>
> > > >
> > > > PROBLEM is, After getting this Prompt, i am unable
> > > > to initialize the flash by "fis init -f". The output is pasted below.
> > > >
> > > > RedBoot> fis init -f
> > > > About to initialize [format] FLASH image system - continue (y/n)? y
> > > > *** Initialize FLASH Image System
> > > > ... Erase from 0x50040000-0x50fc0000:
> > > > ..............................Err = a2
> > > >
> > > > initialization failed 0x50400000: Error trying to erase
> > > > ... Erase from 0x50fe0000-0x50fe0000:
> > > > ... Erase from 0x51000000-0x51000000:
> > > > ... Unlock from 0x50fe0000-0x51000000: .
> > > > ... Erase from 0x50fe0000-0x51000000: .
> > > > ... Program from 0x01fdf000-0x01fff000 at 0x50fe0000: Err = 92
> > > >
> > > > Error writing FIS directory at 0x50fe0000: Error trying to program
> > > > ... Lock from 0x50fe0000-0x51000000: .
> > > >
> > > > I have tried to use "fc -i", It also giving the
> > > > problem while programming.
> > > >
> > > > RedBoot> fc -i
> > > > Initialize non-volatile configuration - continue (y/n)? y
> > > > Run script at boot: false
> > > > Use BOOTP for network configuration: true
> > > > Console baud rate: 115200
> > > > DNS server IP address:
> > > > GDB connection port: 9000
> > > > Force console for special debug messages: false
> > > > Network debug at boot time: false
> > > > Default network device: i82559_eth0
> > > > Network hardware address [MAC] for NPE eth0:
> > > > 0x00:0x00:0x84:0x18:0x50:0x02 Network hardware address [MAC] for NPE
> > > > eth1: 0x00:0x00:0x84:0x40:0x50:0x02 Update RedBoot non-volatile
> > > > configuration - continue (y/n)? y
> > > > ... Unlock from 0x50fc0000-0x50fc1000: .
> > > > ... Erase from 0x50fc0000-0x50fc1000: .
> > > > ... Program from 0x01fd2000-0x01fd3000 at 0x50fc0000: Err = 92
> > > >
> > > > Error writing config data at 0x50fc0000: Error trying to program
> > > > ... Lock from 0x50fc0000-0x50fc1000: .
> > > >
> > > > Any Input regarding this problem will be
> > > > appreciated ...
> > > >
> > > > Thanks & Regards
> > > > K.Annamalai Prakash
> > > >
> > > > --
> > > > Before posting, please read the FAQ:
> > > > http://ecos.sourceware.org/fom/ecos and search the list archive:
> > > > http://ecos.sourceware.org/ml/ecos-discuss
> >
> > -----BEGIN PGP SIGNATURE-----
> > Version: GnuPG v1.2.3 (GNU/Linux)
> >
> > iD8DBQFCUO3Mk8m0kb/vZlYRAj3NAJ9PbgA9o2Q6ljY+6P1RMU+iHDy5NQCeOMX9
> > ppkOKYAGHC5UBv3G3wHdehI=
> > =c8oX
> > -----END PGP SIGNATURE-----
software.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
iD8DBQFCUSe2k8m0kb/vZlYRAn3JAKC5WBI8KZzAzgt9PuKJ+2jKIqfCzACdGwOM
lStJNbQ1tDZRw846S7wFoA0=
=itJl
-----END PGP SIGNATURE-----
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss