This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Redboot problem with EBD9312 - help
- From: Gary Thomas <gary at mlbassoc dot com>
- To: "Mukund JB." <mukundjb at esntechnologies dot co dot in>
- Cc: eCos Discussion <ecos-discuss at ecos dot sourceware dot org>,Frank Pagliughi <fpagliughi at mindspring dot com>,Marcin Glogowski <marcin dot glogowski at interia dot pl>,Manfred Gruber <gruber dot m at utanet dot at>
- Date: Mon, 21 Mar 2005 09:21:29 -0700
- Subject: Re: [ECOS] Redboot problem with EBD9312 - help
- Organization: MLB Associates
- References: <4EE0CBA31942E547B99B3D4BFAB348113F4E11@mail.esn.co.in>
On Mon, 2005-03-21 at 21:53 +0530, Mukund JB. wrote:
> Hi all,
>
>
>
> Thanks. That worked and I got the board working with Linux but with no
> display.
>
> I am able to see the Linux prompt on the minicom console but not on
> the LCD panel.
>
>
>
> I am not getting any display. I am using the default Linux kernel and
> ramdisk.gz provided by cirrus. I found no X server on the board & I
> also find the relevant files like /etc/X11/XF86Config files missing.
>
>
>
> Seeing the inittab file under /etc, I think at least the console
> display should be working. Please see the attached inittab file
> entries & give me a hint.
>
>
>
> I mean if a just want a normal Linux console prompt, where
> configuration file should I specify that?
Make sure you use RedBoot's console channel #0 (verify this with
the 'channel' command).
Past that, these are Linux questions which are out of scope for this
list. You should ask them of either Cirrus or the Linux/ARM crowd.
>
>
>
> Regards,
>
> Mukund jampala
>
>
>
>
>
> >Sorry, the attachment missed.
>
> >I am working on the new EBD9312 boards we got today.
>
> >I have downloaded the redboot.bin successfully; I hooked the network
>
> >cable.
>
> >
>
> >When we start the board for the first time after installation of
>
> >redboot we get the following message just before the redboot prompt:-
>
> >
>
> > +Flash configuration checksum error or invalid key
>
> > EP93xx - no EEPROM, static ESA, or Redboot config option.
>
> > No network interfaces found
>
> >
>
>
>
>
>
>
>
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss