This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
PPP in the SMDK-2410
- From: jeonghoon Yoon <ahoon at dreamwiz dot com>
- To: ecos-discuss at sources dot redhat dot com
- Date: Tue, 4 Jan 2005 19:57:25 +0900 (KST)
- Subject: [ECOS] PPP in the SMDK-2410
Hi,
I use ecos-cvs in my smdk2410 board...
I know that hardware flow control is not yet supported in the smdk2410 board.
I tested ppp_up program in smdk2410 board.
/dev/ser0 for GDB...
/dev/ser1 for PPP...
The output to ser1 was only "BAUD:017"... No more output to ser1 !!!
PPP program can't operate properly in smdk2410 board.... is it???
How to operate PPP program in smdk2410 board ???
CYGINT_IO_SERIAL_FLOW_CONTROL_HW, CYGINT_IO_SERIAL_LINE_STATUS_HW ... must be supported ???
-------------------------------------------------
Your Life on the Net
DreamWiz Free Mail @ http://www.dreamwiz.com/
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss